People in front of the EcoAs formwork.


EcoAs is MEVA's robust hand-set formwork. The crane-independent steel system impresses by its wide range of panel sizes and cost-effective column panels.

Product characteristics

  • Flexibility

    • Panel heights of 350 to 80 cm, panel widths of 100 to 25 cm for problem-free corner solutions with any wall thickness

  • Column panels

    • Inch-perfect shuttering for column cross-sections in 5 cm increments up to max. 75 x 75 cm side length, with smooth, non-absorbent alkus all-plastic facing to meet  the highest fair-faced concrete requirements

  • Capacity

    • Permissible fresh concrete pressure (DIN 18218) over full surface of 50 kN/m² (flatness tolerances to DIN 18202, Tab. 3, Line 6)

  • Crane-independent

  • Closed hollow steel frame profile

    • Structurally robust

    • Torsion-proof

    • Hot-dip galvanised to facilitate cleaning and reduce concrete adhesion 

  • Smart multi-function profile

    • With welded-in Dywidag nuts

    • All accessories, e.g. brackets, push-pull props and alignment rails, attached with MEVA flange screw 

  • Tying for inclined or stepped-level formwork

    • Tie hole with conical steel anchor sleeve, welded-in from both sides

  • Intelligent MEVA product design

    • MEVA assembly lock for structurally continuous connection with only a few hammer blows

    • High-quality alkus all-plastic facing with 7-year warranty 

  • Compatibility with AluFix

The efficient route to best results

Versatile modular system

EcoAs offers a flexible and cost-effective means of tackling irregular floorplans and ­geometries. Being suitable for crane-free use, the efficient hand-set formwork saves time and cuts labour costs. 

The compact, ergonomic design of all panels allows them to be set by hand. At the same time, EcoAs is fully compatible with the lightweight AluFix hand-set formwork. EcoAs column panels are quickly joined together using a smart combination of tensioning screw and flange nut to provide a strong connection. The smooth, non-absorbent alkus facing is capable of meeting the highest fair-faced concrete requirements, even for columns.


  • By using inside and outside corners as well as continuously adjustable hinged corners, it is possible to form all angles between 0° and 180°.

  • Inch-perfect shuttering for column cross-sections in 5 cm increments up to max. 75 x 75 cm side length – with few components while meeting the highest fair-faced ­concrete requirements.

Panel formwork on a construction site in front of the Dubai skyline.

Cost-effective hand-set formwork by MEVA

Illustration of the Meva panel formwork and the components such as the tie rod holder and the assembly lock.


  • Multi-function profile 
    Made from closed hollow steel profiles with welded-in DW 15 nuts for rapid, structurally continuous connection of accessories

  • Hot-dip galvanised frame
    With surface finish to facilitate cleaning and reduce concrete adhesion

  • Closed hollow profile
    For high stability and long service life

  • Tie hole 
    With conical anchor sleeve, welded-in from both sides

  • alkus all-plastic facing
    No water absorption. Resistant to swelling and shrinkage. The smooth, robust surface guarantees a high-quality concrete finish, even after heavy use.

Man who screws a flange screw into an element.

Flange screw 
Single component for strong connection of all accessories.

Technical drawing of the AS-assembly lock.

EA assembly lock 
Only one component is needed for rapid, reliable panel connection: the MEVA assembly lock. Allows single-handed fitting at any position along frame. A few hammer blows suffice to achieve strong, level, stepless panel connection.

MEVA tie rod holder with a tie rod.

Tie rod fixture
For fixing to multi-purpose profile of upright or ­horizontal EcoAs panels. For fast and safe transportation on site.

Panels overview

Panel width [cm] CP MPP Corner Panels Fillers
 100 80 55 50 45 40   30 25      IC OC HIC HOC FS
Height [cm] 350                         ■*
300             ■*

CP Column panel, width 90 cm MPP Multi-purpose panel, width 60 cm IC Inside corner, with side length 25 cm OC Outside corner

HIC Hinged inside corner, with side length 30 cm   HOC Hinged outside corner, with side length 7.5 cm FS Filler strip, 5 cm * Filler strip, 1 and 2 cm (alkus)