Item finder

Our simple item finder provides you with all relevant information about all MEVA products.

System Product Application Ref.-No. Size kg Product Page Description/Application Product Picture
EcoAs EcoAs AL EcoAs AL 21-703-11 300/100 3.00 101.50 EcoAs Frame profile height 10 cm, frame profile width 23 mm. Three tie holes per panel heights 300 cm and 240 cm, two tie holes per panel heights 160 cm and 120 cm. Heights 240 cm, 160 cm and 120 cm: centered tie hole at the top and bottom for horizontal application. The frames of EA panels are made of closed steel profiles and are torsion proof. Eco As AL panels are equipped with alkus facing. All around grooves and EA assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi function profiles allow for an easy, fast and safe attachment of accessories.
EcoAs EcoAs AL EcoAs AL 21-703-21 300/ 80 2.40 86.00 EcoAs Frame profile height 10 cm, frame profile width 23 mm. Three tie holes per panel heights 300 cm and 240 cm, two tie holes per panel heights 160 cm and 120 cm. Heights 240 cm, 160 cm and 120 cm: centered tie hole at the top and bottom for horizontal application. The frames of EA panels are made of closed steel profiles and are torsion proof. Eco As AL panels are equipped with alkus facing. All around grooves and EA assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi function profiles allow for an easy, fast and safe attachment of accessories.
EcoAs EcoAs AL EcoAs AL 21-703-46 300/ 55 1.65 68.50 EcoAs Frame profile height 10 cm, frame profile width 23 mm. Three tie holes per panel heights 300 cm and 240 cm, two tie holes per panel heights 160 cm and 120 cm. Heights 240 cm, 160 cm and 120 cm: centered tie hole at the top and bottom for horizontal application. The frames of EA panels are made of closed steel profiles and are torsion proof. Eco As AL panels are equipped with alkus facing. All around grooves and EA assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi function profiles allow for an easy, fast and safe attachment of accessories.
EcoAs EcoAs AL EcoAs AL 21-703-61 300/ 40 1.20 55.00 EcoAs Frame profile height 10 cm, frame profile width 23 mm. Three tie holes per panel heights 300 cm and 240 cm, two tie holes per panel heights 160 cm and 120 cm. Heights 240 cm, 160 cm and 120 cm: centered tie hole at the top and bottom for horizontal application. The frames of EA panels are made of closed steel profiles and are torsion proof. Eco As AL panels are equipped with alkus facing. All around grooves and EA assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi function profiles allow for an easy, fast and safe attachment of accessories.
EcoAs EcoAs AL EcoAs AL 21-703-76 300/ 25 0.75 41.00 EcoAs Frame profile height 10 cm, frame profile width 23 mm. Three tie holes per panel heights 300 cm and 240 cm, two tie holes per panel heights 160 cm and 120 cm. Heights 240 cm, 160 cm and 120 cm: centered tie hole at the top and bottom for horizontal application. The frames of EA panels are made of closed steel profiles and are torsion proof. Eco As AL panels are equipped with alkus facing. All around grooves and EA assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi function profiles allow for an easy, fast and safe attachment of accessories.
EcoAs EcoAs AL EcoAs AL 21-700-21 240/ 80 1.92 68.00 EcoAs Frame profile height 10 cm, frame profile width 23 mm. Three tie holes per panel heights 300 cm and 240 cm, two tie holes per panel heights 160 cm and 120 cm. Heights 240 cm, 160 cm and 120 cm: centered tie hole at the top and bottom for horizontal application. The frames of EA panels are made of closed steel profiles and are torsion proof. Eco As AL panels are equipped with alkus facing. All around grooves and EA assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi function profiles allow for an easy, fast and safe attachment of accessories.
EcoAs EcoAs AL EcoAs AL 21-700-46 240/ 55 1.32 53.50 EcoAs Frame profile height 10 cm, frame profile width 23 mm. Three tie holes per panel heights 300 cm and 240 cm, two tie holes per panel heights 160 cm and 120 cm. Heights 240 cm, 160 cm and 120 cm: centered tie hole at the top and bottom for horizontal application. The frames of EA panels are made of closed steel profiles and are torsion proof. Eco As AL panels are equipped with alkus facing. All around grooves and EA assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi function profiles allow for an easy, fast and safe attachment of accessories.
EcoAs EcoAs AL EcoAs AL 21-700-51 240/ 50 1.20 51.00 EcoAs Frame profile height 10 cm, frame profile width 23 mm. Three tie holes per panel heights 300 cm and 240 cm, two tie holes per panel heights 160 cm and 120 cm. Heights 240 cm, 160 cm and 120 cm: centered tie hole at the top and bottom for horizontal application. The frames of EA panels are made of closed steel profiles and are torsion proof. Eco As AL panels are equipped with alkus facing. All around grooves and EA assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi function profiles allow for an easy, fast and safe attachment of accessories.
EcoAs EcoAs AL EcoAs AL 21-700-56 240/ 45 1.08 48.00 EcoAs Frame profile height 10 cm, frame profile width 23 mm. Three tie holes per panel heights 300 cm and 240 cm, two tie holes per panel heights 160 cm and 120 cm. Heights 240 cm, 160 cm and 120 cm: centered tie hole at the top and bottom for horizontal application. The frames of EA panels are made of closed steel profiles and are torsion proof. Eco As AL panels are equipped with alkus facing. All around grooves and EA assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi function profiles allow for an easy, fast and safe attachment of accessories.
EcoAs EcoAs AL EcoAs AL 21-700-61 240/ 40 0.96 40.50 EcoAs Frame profile height 10 cm, frame profile width 23 mm. Three tie holes per panel heights 300 cm and 240 cm, two tie holes per panel heights 160 cm and 120 cm. Heights 240 cm, 160 cm and 120 cm: centered tie hole at the top and bottom for horizontal application. The frames of EA panels are made of closed steel profiles and are torsion proof. Eco As AL panels are equipped with alkus facing. All around grooves and EA assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi function profiles allow for an easy, fast and safe attachment of accessories.
EcoAs EcoAs AL EcoAs AL 21-700-76 240/ 25 0.60 32.00 EcoAs Frame profile height 10 cm, frame profile width 23 mm. Three tie holes per panel heights 300 cm and 240 cm, two tie holes per panel heights 160 cm and 120 cm. Heights 240 cm, 160 cm and 120 cm: centered tie hole at the top and bottom for horizontal application. The frames of EA panels are made of closed steel profiles and are torsion proof. Eco As AL panels are equipped with alkus facing. All around grooves and EA assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi function profiles allow for an easy, fast and safe attachment of accessories.
EcoAs EcoAs AL EcoAs AL 21-705-21 160/ 80 1.28 47.00 EcoAs Frame profile height 10 cm, frame profile width 23 mm. Three tie holes per panel heights 300 cm and 240 cm, two tie holes per panel heights 160 cm and 120 cm. Heights 240 cm, 160 cm and 120 cm: centered tie hole at the top and bottom for horizontal application. The frames of EA panels are made of closed steel profiles and are torsion proof. Eco As AL panels are equipped with alkus facing. All around grooves and EA assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi function profiles allow for an easy, fast and safe attachment of accessories.
EcoAs EcoAs AL EcoAs AL 21-705-46 160/ 55 0.88 37.00 EcoAs Frame profile height 10 cm, frame profile width 23 mm. Three tie holes per panel heights 300 cm and 240 cm, two tie holes per panel heights 160 cm and 120 cm. Heights 240 cm, 160 cm and 120 cm: centered tie hole at the top and bottom for horizontal application. The frames of EA panels are made of closed steel profiles and are torsion proof. Eco As AL panels are equipped with alkus facing. All around grooves and EA assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi function profiles allow for an easy, fast and safe attachment of accessories.
EcoAs EcoAs AL EcoAs AL 21-705-51 160/ 50 0.80 36.00 EcoAs Frame profile height 10 cm, frame profile width 23 mm. Three tie holes per panel heights 300 cm and 240 cm, two tie holes per panel heights 160 cm and 120 cm. Heights 240 cm, 160 cm and 120 cm: centered tie hole at the top and bottom for horizontal application. The frames of EA panels are made of closed steel profiles and are torsion proof. Eco As AL panels are equipped with alkus facing. All around grooves and EA assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi function profiles allow for an easy, fast and safe attachment of accessories.
EcoAs EcoAs AL EcoAs AL 21-705-56 160/ 45 0.72 33.50 EcoAs Frame profile height 10 cm, frame profile width 23 mm. Three tie holes per panel heights 300 cm and 240 cm, two tie holes per panel heights 160 cm and 120 cm. Heights 240 cm, 160 cm and 120 cm: centered tie hole at the top and bottom for horizontal application. The frames of EA panels are made of closed steel profiles and are torsion proof. Eco As AL panels are equipped with alkus facing. All around grooves and EA assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi function profiles allow for an easy, fast and safe attachment of accessories.
EcoAs EcoAs AL EcoAs AL 21-705-61 160/ 40 0.64 27.50 EcoAs Frame profile height 10 cm, frame profile width 23 mm. Three tie holes per panel heights 300 cm and 240 cm, two tie holes per panel heights 160 cm and 120 cm. Heights 240 cm, 160 cm and 120 cm: centered tie hole at the top and bottom for horizontal application. The frames of EA panels are made of closed steel profiles and are torsion proof. Eco As AL panels are equipped with alkus facing. All around grooves and EA assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi function profiles allow for an easy, fast and safe attachment of accessories.
EcoAs EcoAs AL EcoAs AL 21-705-76 160/ 25 0.40 21.50 EcoAs Frame profile height 10 cm, frame profile width 23 mm. Three tie holes per panel heights 300 cm and 240 cm, two tie holes per panel heights 160 cm and 120 cm. Heights 240 cm, 160 cm and 120 cm: centered tie hole at the top and bottom for horizontal application. The frames of EA panels are made of closed steel profiles and are torsion proof. Eco As AL panels are equipped with alkus facing. All around grooves and EA assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi function profiles allow for an easy, fast and safe attachment of accessories.
EcoAs EcoAs AL EcoAs AL 21-710-21 120/ 80 0.96 37.00 EcoAs Frame profile height 10 cm, frame profile width 23 mm. Three tie holes per panel heights 300 cm and 240 cm, two tie holes per panel heights 160 cm and 120 cm. Heights 240 cm, 160 cm and 120 cm: centered tie hole at the top and bottom for horizontal application. The frames of EA panels are made of closed steel profiles and are torsion proof. Eco As AL panels are equipped with alkus facing. All around grooves and EA assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi function profiles allow for an easy, fast and safe attachment of accessories.
EcoAs EcoAs AL EcoAs AL 21-710-46 120/ 55 0.66 30.00 EcoAs Frame profile height 10 cm, frame profile width 23 mm. Three tie holes per panel heights 300 cm and 240 cm, two tie holes per panel heights 160 cm and 120 cm. Heights 240 cm, 160 cm and 120 cm: centered tie hole at the top and bottom for horizontal application. The frames of EA panels are made of closed steel profiles and are torsion proof. Eco As AL panels are equipped with alkus facing. All around grooves and EA assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi function profiles allow for an easy, fast and safe attachment of accessories.
EcoAs EcoAs AL EcoAs AL 21-710-51 120/ 50 0.60 28.50 EcoAs Frame profile height 10 cm, frame profile width 23 mm. Three tie holes per panel heights 300 cm and 240 cm, two tie holes per panel heights 160 cm and 120 cm. Heights 240 cm, 160 cm and 120 cm: centered tie hole at the top and bottom for horizontal application. The frames of EA panels are made of closed steel profiles and are torsion proof. Eco As AL panels are equipped with alkus facing. All around grooves and EA assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi function profiles allow for an easy, fast and safe attachment of accessories.
EcoAs EcoAs AL EcoAs AL 21-710-56 120/ 45 0.54 27.00 EcoAs Frame profile height 10 cm, frame profile width 23 mm. Three tie holes per panel heights 300 cm and 240 cm, two tie holes per panel heights 160 cm and 120 cm. Heights 240 cm, 160 cm and 120 cm: centered tie hole at the top and bottom for horizontal application. The frames of EA panels are made of closed steel profiles and are torsion proof. Eco As AL panels are equipped with alkus facing. All around grooves and EA assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi function profiles allow for an easy, fast and safe attachment of accessories.
EcoAs EcoAs AL EcoAs AL 21-710-61 120/ 40 0.48 21.00 EcoAs Frame profile height 10 cm, frame profile width 23 mm. Three tie holes per panel heights 300 cm and 240 cm, two tie holes per panel heights 160 cm and 120 cm. Heights 240 cm, 160 cm and 120 cm: centered tie hole at the top and bottom for horizontal application. The frames of EA panels are made of closed steel profiles and are torsion proof. Eco As AL panels are equipped with alkus facing. All around grooves and EA assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi function profiles allow for an easy, fast and safe attachment of accessories.
EcoAs EcoAs AL EcoAs AL 21-710-71 120/ 30 0.36 18.00 EcoAs Frame profile height 10 cm, frame profile width 23 mm. Three tie holes per panel heights 300 cm and 240 cm, two tie holes per panel heights 160 cm and 120 cm. Heights 240 cm, 160 cm and 120 cm: centered tie hole at the top and bottom for horizontal application. The frames of EA panels are made of closed steel profiles and are torsion proof. Eco As AL panels are equipped with alkus facing. All around grooves and EA assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi function profiles allow for an easy, fast and safe attachment of accessories.
EcoAs EcoAs AL EcoAs AL 21-710-76 120/ 25 0.30 16.50 EcoAs Frame profile height 10 cm, frame profile width 23 mm. Three tie holes per panel heights 300 cm and 240 cm, two tie holes per panel heights 160 cm and 120 cm. Heights 240 cm, 160 cm and 120 cm: centered tie hole at the top and bottom for horizontal application. The frames of EA panels are made of closed steel profiles and are torsion proof. Eco As AL panels are equipped with alkus facing. All around grooves and EA assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi function profiles allow for an easy, fast and safe attachment of accessories.
EcoAs EcoAs AL EcoAs AL 21-715-61 80/ 40 0.32 15.00 EcoAs Frame profile height 10 cm, frame profile width 23 mm. Three tie holes per panel heights 300 cm and 240 cm, two tie holes per panel heights 160 cm and 120 cm. Heights 240 cm, 160 cm and 120 cm: centered tie hole at the top and bottom for horizontal application. The frames of EA panels are made of closed steel profiles and are torsion proof. Eco As AL panels are equipped with alkus facing. All around grooves and EA assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi function profiles allow for an easy, fast and safe attachment of accessories.
EcoAs EcoAs BP EcoAs BP 21-703-10 300/100 3.00 95.00 EcoAs Eco As BP panels are equipped with birch ply.
EcoAs EcoAs BP EcoAs BP 21-703-20 300/80 2.40 81.50 EcoAs Eco As BP panels are equipped with birch ply.
EcoAs EcoAs BP EcoAs BP 21-703-45 300/55 1.65 65.00 EcoAs Eco As BP panels are equipped with birch ply.
EcoAs EcoAs BP EcoAs BP 21-703-60 300/40 1.20 52.00 EcoAs Eco As BP panels are equipped with birch ply.
EcoAs EcoAs BP EcoAs BP 21-703-75 300/25 0.75 39.50 EcoAs Eco As BP panels are equipped with birch ply.
EcoAs Foundation tape Foundation tape 50 m 29-307-50 20.00 EcoAs Galvanized. Hole spacing 50 mm, hole Ø 16 mm, length 50 m. Adm. tractive force 10 kN. To be cut at hole center. Serves together with the appropriate tensioner as bottom anchoring when assembling panels in horizontal position.
EcoAs Tensioner EA for foundation tape Tensioner EA for foundation tape 29-307-75 1.26 EcoAs Galvanized. Connects the foundation tape to EcoAs or AluFix panels and serves as bottom anchoring when assembling panels in horizontal position. Two tensioners are required per anchoring position.
EcoAs Trolley for foundation tape Trolley for foundation tape 29-307-55 21.80 EcoAs Not shown. Galvanized. Is used to transport and cut the foundation tape to length. Suitable for one roll. Pneumatic wheels.
EcoAs EcoAs AL CP EcoAs AL 350/90 CP 21-704-86 3.15 133.10 EcoAs Column panel, steel, galvanized. Four tie holes for each panel height with unperforated alkus facing. Equipped with perforated profiles for tensioning screws M350/EA. Can be used for column formwork up to 75 cm (adjustment in 5 cm increments) and for pilasters, connections to existing walls, hinged corners, etc.
EcoAs EcoAs AL CP EcoAs AL 300/90 CP 21-704-91 2.70 115.10 EcoAs Column panel, steel, galvanized. Four tie holes for each panel height with unperforated alkus facing. Equipped with perforated profiles for tensioning screws M350/EA. Can be used for column formwork up to 75 cm (adjustment in 5 cm increments) and for pilasters, connections to existing walls, hinged corners, etc.
EcoAs EcoAs AL CP EcoAs AL 150/90 CP 21-704-96 1.35 65.80 EcoAs Column panel, steel, galvanized. Four tie holes for each panel height with unperforated alkus facing. Equipped with perforated profiles for tensioning screws M350/EA. Can be used for column formwork up to 75 cm (adjustment in 5 cm increments) and for pilasters, connections to existing walls, hinged corners, etc.
EcoAs EcoAs AL CP EcoAs BP 350/90 CP 21-704-85 3.15 129.60 EcoAs Column panel, steel, galvanized. Four tie holes for each panel height with unperforated alkus facing. Equipped with perforated profiles for tensioning screws M350/EA. Can be used for column formwork up to 75 cm (adjustment in 5 cm increments) and for pilasters, connections to existing walls, hinged corners, etc.
EcoAs EcoAs AL CP EcoAs BP 300/90 CP 21-704-90 2.70 112.10 EcoAs Column panel, steel, galvanized. Four tie holes for each panel height with unperforated alkus facing. Equipped with perforated profiles for tensioning screws M350/EA. Can be used for column formwork up to 75 cm (adjustment in 5 cm increments) and for pilasters, connections to existing walls, hinged corners, etc.
EcoAs EcoAs AL CP EcoAs BP 150/90 CP 21-704-95 1.35 64.30 EcoAs Column panel, steel, galvanized. Four tie holes for each panel height with unperforated alkus facing. Equipped with perforated profiles for tensioning screws M350/EA. Can be used for column formwork up to 75 cm (adjustment in 5 cm increments) and for pilasters, connections to existing walls, hinged corners, etc.
EcoAs Tension screw M350/EA Tension screw M350/EA 29-402-98 0.89 EcoAs Galvanized. Connects column panels. A flange nut 100 or an articulated flange nut 15/120 is also required.
EcoAs EcoAs AL MPP EcoAs AL-MPP 21-720-51 120/60 0.72 33.50 EcoAs EA-multipurose panel with perforated profiles to be used as column formwork or to concrete pilasters, stop ends, connections to existing walls, corner configurations, etc. Is used in connection with stop end fixture 23/40.
EcoAs EcoAs AL-IC EcoAs AL-IC 21-724-10 300/25 1.50 31.30 EcoAs EA inside corner Alu(minium) frame with high-quality annealed plastic coating. All-plastic facing. Aluminium frame with tie holes. For 90° corners, side length 25 cm.
EcoAs EcoAs AL-IC EcoAs AL-IC 21-724-20 240/25 1.20 25.20 EcoAs EA inside corner Alu(minium) frame with high-quality annealed plastic coating. All-plastic facing. Aluminium frame with tie holes. For 90° corners, side length 25 cm.
EcoAs EcoAs AL-IC EcoAs AL-IC 21-724-30 160/25 0.80 17.30 EcoAs EA inside corner Alu(minium) frame with high-quality annealed plastic coating. All-plastic facing. Aluminium frame with tie holes. For 90° corners, side length 25 cm.
EcoAs EcoAs AL-IC EcoAs AL-IC 21-724-40 120/25 0.60 13.40 EcoAs EA inside corner Alu(minium) frame with high-quality annealed plastic coating. All-plastic facing. Aluminium frame with tie holes. For 90° corners, side length 25 cm.
EcoAs EcoAs OC EcoAs OC 21-725-75 300 0.30 15.60 EcoAs EA outside corner, Aluminium with high-quality annealed plastic coating. Facing 5 cm wide on both sides, integrated chamfer strip. Provides together with EA panels and EA assembly locks a fast and tight outside corner assembly for 90° angles.
EcoAs EcoAs OC EcoAs OC 21-725-85 240 0.24 13.00 EcoAs EA outside corner, Aluminium with high-quality annealed plastic coating. Facing 5 cm wide on both sides, integrated chamfer strip. Provides together with EA panels and EA assembly locks a fast and tight outside corner assembly for 90° angles.
EcoAs EcoAs OC EcoAs OC 21-725-90 160 0.16 9.00 EcoAs EA outside corner, Aluminium with high-quality annealed plastic coating. Facing 5 cm wide on both sides, integrated chamfer strip. Provides together with EA panels and EA assembly locks a fast and tight outside corner assembly for 90° angles.
EcoAs EcoAs OC EcoAs OC 21-725-95 120 0.12 6.50 EcoAs EA outside corner, Aluminium with high-quality annealed plastic coating. Facing 5 cm wide on both sides, integrated chamfer strip. Provides together with EA panels and EA assembly locks a fast and tight outside corner assembly for 90° angles.
EcoAs EcoAs HIC EcoAs HIC 21-726-30 240/30 1.44 57.00 EcoAs EA hinged inside corner, steel construction with steel sheeting, primed and cavity-sealed. Side length 30 cm. Adjustable angle 60° to 180°.
EcoAs EcoAs HIC EcoAs HIC 21-726-40 120/30 0.72 29.00 EcoAs EA hinged inside corner, steel construction with steel sheeting, primed and cavity-sealed. Side length 30 cm. Adjustable angle 60° to 180°.
EcoAs EcoAs HOC EcoAs HOC 21-726-50 240 0.36 40.00 EcoAs EA hinged outside corner, steel construction with steel sheeting, primed and cavity-sealed. Side length 7.5 cm. Adjustable angle 60° to 180°.
EcoAs EcoAs HOC EcoAs HOC 21-726-60 120 0.18 20.20 EcoAs EA hinged outside corner, steel construction with steel sheeting, primed and cavity-sealed. Side length 7.5 cm. Adjustable angle 60° to 180°.
EcoAs EA assembly lock EA-assembly lock 29-205-50 1.50 EcoAs Galvanized. Tightly connects and aligns EA panels. Clamping length 4.6 cm.
EcoAs Uni-assembly lock Uni-assembly lock 22 29-400-85 3.60 EcoAs Galvanized. For stepless compensation. Clamping length 22 cm or 28 cm.
EcoAs Uni-assembly lock Uni-assembly lock 28 29-400-90 3.90 EcoAs Galvanized. For stepless compensation. Clamping length 22 cm or 28 cm.
EcoAs RS-assembly lock RS-assembly lock 23-807-70 4.70 EcoAs Galvanized, For stepless length compensation. Clamping length is 11.9 to 20.5 cm for stepless compensation.
EcoAs Flange screw Flange screw 18 29-401-10 1.10 EcoAs Galvanized. DW thread Ø 15 mm. Is used to attach accessories, e.g. alignment rails, brace frames, push-pull props, etc. Length of thread 18 cm or 27 cm.
EcoAs Flange screw Flange screw 28 29-401-12 1.23 EcoAs Galvanized. DW thread Ø 15 mm. Is used to attach accessories, e.g. alignment rails, brace frames, push-pull props, etc. Length of thread 18 cm or 27 cm.
EcoAs EA steel filler EA-steel filler 240/5 21-726-00 0.12 13.00 EcoAs Completely made of steel, primed and cavity-sealed, with tie holes. For length adjustment of 5 cm, particularly in corners. For the required quantity of Uni-assembly locks see Technical Instruction Manual EcoAs.
EcoAs EA steel filler EA-steel filler 120/5 21-726-10 0.06 6.50 EcoAs Completely made of steel, primed and cavity-sealed, with tie holes. For length adjustment of 5 cm, particularly in corners. For the required quantity of Uni-assembly locks see Technical Instruction Manual EcoAs.
EcoAs EA compensation plate EA-compensation plate 120/20 21-726-20 0.24 11.80 EcoAs Steel construction with steel sheeting, primed and cavity-sealed. Is used to compensate gaps of 6 to 20 cm and attached to panels with 2 EA assembly locks. Alignment rails must be used to bridge and align the panels with the compensation plate.
EcoAs Dismantling auxiliary 120 Dismantling auxiliary 120 29-306-20 7.20 EcoAs 10 cm wide, 120 cm high. Diagonally divided timber filler. Permits easy stripping in restricted areas such as shafts and staircases. Two Uni-assembly locks are required per dismantling auxiliary. Alignment rails must be used for reinforcement. Delivery and weight by pairs.
EcoAs Stop end bracket Stop end bracket 23/40 29-105-45 12.20 EcoAs Galvanized. Is used to form stop ends. Stop end bracket 40/60 for wall thickness up to 40 cm and profile widths of 40 and 60 mm. Stop end bracket 2.5‘ - 60/23 for wall thickness up 75 cm (2.5‘) and profile widths of 23 mm (EcoAs) and 60 mm.
EcoAs Stop end bracket Stop end bracket 2.5' - 60/23 29-105-60 20.00 EcoAs Galvanized. Is used to form stop ends. Stop end bracket 40/60 for wall thickness up to 40 cm and profile widths of 40 and 60 mm. Stop end bracket 2.5‘ - 60/23 for wall thickness up 75 cm (2.5‘) and profile widths of 23 mm (EcoAs) and 60 mm.
EcoAs Timber fixture Timber fixture 29-105-90 1.50 EcoAs Galvanized. Is used to attach 10 to 12 cm high squared timbers when bracing panel joints for crane ganging or when bridging problem areas.
EcoAs Stop end fixture 23/40 Stop end fixture 23/40 (yellow) 29-402-85 3.00 EcoAs Yellow chromated. Is used together with the EcoAs or StarTec multi-purpose panel to form outside corners and abutments. Is suited for the frame profiles of EcoAs and AluFix (23 mm) and AluStar/StarTec (40 mm). A flange nut 100 or an articulated flange nut 15/120 is also required.
EcoAs Plug D20 Plug D20 29-902-63 0.20 EcoAs Is used to close unused tie holes (AluFix, EcoAs, AluStar and StarTec).
EcoAs Plug D20 Plug D20 without imprint 29-902-62 0.20 EcoAs Is used to close unused tie holes (AluFix, EcoAs, AluStar and StarTec).
EcoAs AS alignment rail AS-alignment rail 50, galv. 29-201-73 5.20 EcoAs Galvanized. Is used to brace panel joints for crane ganging, bridge problem areas and brace compensation areas. Is attached to the formwork with flange screws.
EcoAs AS alignment rail AS-alignment rail 125, galv. 29-201-75 10.50 EcoAs Galvanized. Is used to brace panel joints for crane ganging, bridge problem areas and brace compensation areas. Is attached to the formwork with flange screws.
EcoAs AS alignment rail AS-alignment rail 200, galv. 29-201-80 19.00 EcoAs Galvanized. Is used to brace panel joints for crane ganging, bridge problem areas and brace compensation areas. Is attached to the formwork with flange screws.
EcoAs Tie rod DW 15/90 Tie rod DW 15/90 29-900-80 1.25 EcoAs Uncoated, not weldable. DW thread Ø 15 mm. Is used to tie panels of double-sided formwork. Adm. load capacity 90 kN (DIN 18216).
EcoAs Tie wrench DW15/DW20 Tie wrench DW15/DW20 29-901-39 4.50 EcoAs Made of steel, galvanized. Used to screw in, screw out and hold tie rods DW15 and DW20; length 400 mm.
EcoAs Plastic tube Plastic tube D22/200 29-902-30 8.75 EcoAs Plastic spacer tube for tie holes. Two cones are also required per tie hole. D22/200: internal Ø 22 mm, external Ø 28 mm, standard length 2.00 m. D32/36: internal Ø 32 mm, external Ø 36 mm, standard length 2.00 m.
EcoAs Cone for plastic tube Cone for plastic tube D22/10 (10 mm covering) 29-902-40 13.00 EcoAs Available with 10 mm or 30 mm covering.
EcoAs Cone for plastic tube Cone for plastic tube D22/30 (30 mm covering) 29-902-50 3.25 EcoAs Available with 10 mm or 30 mm covering.
EcoAs Flange nut 100 Flange nut 100 (SW 27, forged) 29-900-20 0.70 EcoAs Forged, galvanized. For DW tie rods with 15 mm Ø. Plate Ø 100 mm, SW 27. Admissible load capacity 90 kN (DIN 18216).
EcoAs Articulated flange nut 15/120 Articulated flange nut 15/120 (SW 27) 29-900-10 1.81 EcoAs Forged, galvanized. DIN 18216. DW thread Ø 15 mm, plate Ø 120 mm, max. inclination 10°, SW 27. Max. load capacity 90 kN. Reduces wear of panel coating.
EcoAs Spanner SW 27 Spanner SW 27 29-800-10 1.80 EcoAs Inset yellow chromated. Spanner width (SW) 27 mm. Is used to tighten and loosen flange nuts 100, articulated flange nuts 15/120 and flange screws.
EcoAs Drive nut 60 Drive nut 60 29-900-23 0.50 EcoAs Galvanized. DW thread Ø 15 mm, plate Ø 60 mm. Adm. load capacity 90 kN (DIN 18216). Is used to tie the formwork to the ground or to a wall connection.
EcoAs Tie claw 23 Tie claw 23 29-901-44 0.17 EcoAs Galvanized. Permits tieing (with tie rod DW 15 and flange nut 100) directly above or beside EcoAs and AluFix panels.
EcoAs Crane hook EA/AF-crane hook 29-103-05 6.00 EcoAs Coated. Is used to move and crane-gang AluFix and EcoAs panels. Self-locking. Load capacity 6 kN (600 kg). Always two crane hooks required per gang. Refer to the crane hook Operating Instructions for application and safety test.
EcoAs Brace frame 250 Brace frame 250 with formwork-prop connector 29-109-20 31.50 EcoAs Galvanized. Available with formwork-prop connector. Is used to align and brace the formwork. Consists of a push-pull prop R 250 (190‑320 cm), a brace SRL 120 (90‑150 cm) and a double-jointed footplate.The formwork-prop connectors are attached to the formwork with flange screws 18.
EcoAs Formwork-prop connector Formwork-prop connector 29-804-85 1.65 EcoAs Galvanized. Delivery includes head bolt 16/90 and cotter pin 4. Is used to connect braces, brace frames and push-pull props (max. Ø 48 mm) to the multi-function profile with a flange screw 18.
EcoAs Walkway bracket Walkway bracket 90 (yellow), galv. 29-106-00 10.30 EcoAs Galvanized, yellow, pluggable. Is used as working and safety scaffold. Is attached to the multi-function profile and secured to the multi-function profile below with a flange screw 18. The planking can be mounted to the brackets. Working width approx. 90 cm. MEVA Guard-railing post is also required. Bracket spacing depends on type of planking (DIN 4420).
EcoAs Side railing Side railing 90/100, galv. 29-108-20 12.30 EcoAs Galvanized. Is plugged into the walkway bracket.
EcoAs Side railing Side railing 125/100, galv. 29-108-30 13.80 EcoAs Galvanized. Is plugged into the walkway bracket.
EcoAs Guard-railing post Guard-railing post 100 29-106-75 3.70 EcoAs Galvanized. Is plugged into the walkway bracket.
EcoAs Guard-railing post Guard-railing post 140 29-106-85 4.70 EcoAs Galvanized. Is plugged into the walkway bracket.
EcoAs Guard-railing post 48 Guard-railing post 48/120 (UK) 29-106-80 5.50 EcoAs Galvanized. With manifold to be plugged into the walkway bracket and with 48 mm Ø tube to attach scaffold couplers.
EcoAs Guard-railing post 48 Guard-railing post 48/134 29-920-80 5.45 EcoAs Galvanized. With manifold to be plugged into the walkway bracket and with 48 mm Ø tube to attach scaffold couplers.
EcoAs Tilting bracket 23 Tilting bracket 23 29-920-84 4.77 EcoAs Galvanised. Used to attach MEVA guardrailing posts to create a fall protection system. It can be set up vertically to facilitate the installation of safety meshes or railing boards or inclined by 15° to create a larger working area. Secured with a wedge to the frame profile of 23 mm.
EcoAs Scaffold tube Scaffold tube 48/200 29-412-23 9.40 EcoAs Galvanized. Is used as handrail in combination with guard-railing post 48.
EcoAs Scaffold tube Scaffold tube 48/300 29-412-26 14.10 EcoAs Galvanized. Is used as handrail in combination with guard-railing post 48.
EcoAs Scaffold tube Scaffold tube 48/400 29-412-27 18.80 EcoAs Galvanized. Is used as handrail in combination with guard-railing post 48.
EcoAs Scaffold tube Scaffold tube 48/500 29-412-25 23.50 EcoAs Galvanized. Is used as handrail in combination with guard-railing post 48.
EcoAs Scaffold tube Scaffold tube 48/600 29-412-28 28.20 EcoAs Galvanized. Is used as handrail in combination with guard-railing post 48.
EcoAs Swivel-joint coupler 48/48 Swivel-joint coupler 48/48 29-412-52 1.20 EcoAs Galvanized. Connects 2 scaffold tubes with 48.3 mm Ø at any angle.
EcoAs Transport angle 10 Transport angle 10 29-305-10 16.00 EcoAs Is used to stack and transport 5 to 12 EcoAs or AluFix panels. Distance between holes 10 cm. We recommend using 2 foldable angles and 2 angles of the rigid type per stack. Max. load capacity is 10 kN per angle. For safety reasons consider 20 kN as maximum capacity for the whole stack.
EcoAs Transport angle 10 Transport angle 10, rigid type 29-305-15 10.40 EcoAs Is used to stack and transport 5 to 12 EcoAs or AluFix panels. Distance between holes 10 cm. We recommend using 2 foldable angles and 2 angles of the rigid type per stack. Max. load capacity is 10 kN per angle. For safety reasons consider 20 kN as maximum capacity for the whole stack.
EcoAs Safety plug AS/ST stacks, black Safety plug AS/ST stacks, black 40-131-10 19.00 EcoAs Plastic, black. Secures stacked AluFix, EcoAs, AluStar and StarTec panels.
AluFix AluFix AL AluFix AL 22-133-10 350/90 3.15 62.48 AluFix Construction height 10 cm, frame profile width 23 mm. Four tie holes per panel height 350 cm, three tie holes per panel height 300, 270 and 250 cm, two tie holes per panel height 150 and 135 cm. The frames of the AF panels are made of closed 3-chamber aluminium profiles (double groove) or 2-chamber aluminium profiles (single groove) and are torsion-proof. They are easy to clean thanks to their high-quality annealed powder coating. The AluFix AL panels are equipped with alkus facing. All-around grooves and EA assembly locks (double groove) or E assembly locks (single groove) guarantee a tight and perfectly aligned panel connection. Anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluFix AluFix AL AluFix AL 22-133-25 350/75 2.63 53.69 AluFix Construction height 10 cm, frame profile width 23 mm. Four tie holes per panel height 350 cm, three tie holes per panel height 300, 270 and 250 cm, two tie holes per panel height 150 and 135 cm. The frames of the AF panels are made of closed 3-chamber aluminium profiles (double groove) or 2-chamber aluminium profiles (single groove) and are torsion-proof. They are easy to clean thanks to their high-quality annealed powder coating. The AluFix AL panels are equipped with alkus facing. All-around grooves and EA assembly locks (double groove) or E assembly locks (single groove) guarantee a tight and perfectly aligned panel connection. Anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluFix AluFix AL AluFix AL 22-133-45 350/55 1.93 41.41 AluFix Construction height 10 cm, frame profile width 23 mm. Four tie holes per panel height 350 cm, three tie holes per panel height 300, 270 and 250 cm, two tie holes per panel height 150 and 135 cm. The frames of the AF panels are made of closed 3-chamber aluminium profiles (double groove) or 2-chamber aluminium profiles (single groove) and are torsion-proof. They are easy to clean thanks to their high-quality annealed powder coating. The AluFix AL panels are equipped with alkus facing. All-around grooves and EA assembly locks (double groove) or E assembly locks (single groove) guarantee a tight and perfectly aligned panel connection. Anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluFix AluFix AL AluFix AL 22-133-60 350/40 1.40 32.68 AluFix Construction height 10 cm, frame profile width 23 mm. Four tie holes per panel height 350 cm, three tie holes per panel height 300, 270 and 250 cm, two tie holes per panel height 150 and 135 cm. The frames of the AF panels are made of closed 3-chamber aluminium profiles (double groove) or 2-chamber aluminium profiles (single groove) and are torsion-proof. They are easy to clean thanks to their high-quality annealed powder coating. The AluFix AL panels are equipped with alkus facing. All-around grooves and EA assembly locks (double groove) or E assembly locks (single groove) guarantee a tight and perfectly aligned panel connection. Anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluFix AluFix AL AluFix AL 22-133-75 350/25 0.88 24.21 AluFix Construction height 10 cm, frame profile width 23 mm. Four tie holes per panel height 350 cm, three tie holes per panel height 300, 270 and 250 cm, two tie holes per panel height 150 and 135 cm. The frames of the AF panels are made of closed 3-chamber aluminium profiles (double groove) or 2-chamber aluminium profiles (single groove) and are torsion-proof. They are easy to clean thanks to their high-quality annealed powder coating. The AluFix AL panels are equipped with alkus facing. All-around grooves and EA assembly locks (double groove) or E assembly locks (single groove) guarantee a tight and perfectly aligned panel connection. Anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluFix AluFix AL AluFix AL 22-134-25 300/75 2.25 45.95 AluFix Construction height 10 cm, frame profile width 23 mm. Four tie holes per panel height 350 cm, three tie holes per panel height 300, 270 and 250 cm, two tie holes per panel height 150 and 135 cm. The frames of the AF panels are made of closed 3-chamber aluminium profiles (double groove) or 2-chamber aluminium profiles (single groove) and are torsion-proof. They are easy to clean thanks to their high-quality annealed powder coating. The AluFix AL panels are equipped with alkus facing. All-around grooves and EA assembly locks (double groove) or E assembly locks (single groove) guarantee a tight and perfectly aligned panel connection. Anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluFix AluFix AL AluFix AL 22-134-45 300/55 1.65 36.75 AluFix Construction height 10 cm, frame profile width 23 mm. Four tie holes per panel height 350 cm, three tie holes per panel height 300, 270 and 250 cm, two tie holes per panel height 150 and 135 cm. The frames of the AF panels are made of closed 3-chamber aluminium profiles (double groove) or 2-chamber aluminium profiles (single groove) and are torsion-proof. They are easy to clean thanks to their high-quality annealed powder coating. The AluFix AL panels are equipped with alkus facing. All-around grooves and EA assembly locks (double groove) or E assembly locks (single groove) guarantee a tight and perfectly aligned panel connection. Anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluFix AluFix AL AluFix AL 22-134-60 300/40 1.20 29.59 AluFix Construction height 10 cm, frame profile width 23 mm. Four tie holes per panel height 350 cm, three tie holes per panel height 300, 270 and 250 cm, two tie holes per panel height 150 and 135 cm. The frames of the AF panels are made of closed 3-chamber aluminium profiles (double groove) or 2-chamber aluminium profiles (single groove) and are torsion-proof. They are easy to clean thanks to their high-quality annealed powder coating. The AluFix AL panels are equipped with alkus facing. All-around grooves and EA assembly locks (double groove) or E assembly locks (single groove) guarantee a tight and perfectly aligned panel connection. Anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluFix AluFix AL AluFix AL 22-134-75 300/25 0.75 21.37 AluFix Construction height 10 cm, frame profile width 23 mm. Four tie holes per panel height 350 cm, three tie holes per panel height 300, 270 and 250 cm, two tie holes per panel height 150 and 135 cm. The frames of the AF panels are made of closed 3-chamber aluminium profiles (double groove) or 2-chamber aluminium profiles (single groove) and are torsion-proof. They are easy to clean thanks to their high-quality annealed powder coating. The AluFix AL panels are equipped with alkus facing. All-around grooves and EA assembly locks (double groove) or E assembly locks (single groove) guarantee a tight and perfectly aligned panel connection. Anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluFix AluFix AL AluFix AL 22-137-10 270/90 2.43 47.70 AluFix Construction height 10 cm, frame profile width 23 mm. Four tie holes per panel height 350 cm, three tie holes per panel height 300, 270 and 250 cm, two tie holes per panel height 150 and 135 cm. The frames of the AF panels are made of closed 3-chamber aluminium profiles (double groove) or 2-chamber aluminium profiles (single groove) and are torsion-proof. They are easy to clean thanks to their high-quality annealed powder coating. The AluFix AL panels are equipped with alkus facing. All-around grooves and EA assembly locks (double groove) or E assembly locks (single groove) guarantee a tight and perfectly aligned panel connection. Anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluFix AluFix AL AluFix AL 22-137-25 270/75 2.02 41.30 AluFix Construction height 10 cm, frame profile width 23 mm. Four tie holes per panel height 350 cm, three tie holes per panel height 300, 270 and 250 cm, two tie holes per panel height 150 and 135 cm. The frames of the AF panels are made of closed 3-chamber aluminium profiles (double groove) or 2-chamber aluminium profiles (single groove) and are torsion-proof. They are easy to clean thanks to their high-quality annealed powder coating. The AluFix AL panels are equipped with alkus facing. All-around grooves and EA assembly locks (double groove) or E assembly locks (single groove) guarantee a tight and perfectly aligned panel connection. Anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluFix AluFix AL AluFix AL 22-137-45 270/55 1.49 31.70 AluFix Construction height 10 cm, frame profile width 23 mm. Four tie holes per panel height 350 cm, three tie holes per panel height 300, 270 and 250 cm, two tie holes per panel height 150 and 135 cm. The frames of the AF panels are made of closed 3-chamber aluminium profiles (double groove) or 2-chamber aluminium profiles (single groove) and are torsion-proof. They are easy to clean thanks to their high-quality annealed powder coating. The AluFix AL panels are equipped with alkus facing. All-around grooves and EA assembly locks (double groove) or E assembly locks (single groove) guarantee a tight and perfectly aligned panel connection. Anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluFix AluFix AL AluFix AL 22-137-60 270/40 1.08 25.00 AluFix Construction height 10 cm, frame profile width 23 mm. Four tie holes per panel height 350 cm, three tie holes per panel height 300, 270 and 250 cm, two tie holes per panel height 150 and 135 cm. The frames of the AF panels are made of closed 3-chamber aluminium profiles (double groove) or 2-chamber aluminium profiles (single groove) and are torsion-proof. They are easy to clean thanks to their high-quality annealed powder coating. The AluFix AL panels are equipped with alkus facing. All-around grooves and EA assembly locks (double groove) or E assembly locks (single groove) guarantee a tight and perfectly aligned panel connection. Anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluFix AluFix AL AluFix AL 22-137-75 270/25 0.68 18.60 AluFix Construction height 10 cm, frame profile width 23 mm. Four tie holes per panel height 350 cm, three tie holes per panel height 300, 270 and 250 cm, two tie holes per panel height 150 and 135 cm. The frames of the AF panels are made of closed 3-chamber aluminium profiles (double groove) or 2-chamber aluminium profiles (single groove) and are torsion-proof. They are easy to clean thanks to their high-quality annealed powder coating. The AluFix AL panels are equipped with alkus facing. All-around grooves and EA assembly locks (double groove) or E assembly locks (single groove) guarantee a tight and perfectly aligned panel connection. Anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluFix AluFix AL AluFix AL 22-138-10 250/90 2.25 45.20 AluFix Construction height 10 cm, frame profile width 23 mm. Four tie holes per panel height 350 cm, three tie holes per panel height 300, 270 and 250 cm, two tie holes per panel height 150 and 135 cm. The frames of the AF panels are made of closed 3-chamber aluminium profiles (double groove) or 2-chamber aluminium profiles (single groove) and are torsion-proof. They are easy to clean thanks to their high-quality annealed powder coating. The AluFix AL panels are equipped with alkus facing. All-around grooves and EA assembly locks (double groove) or E assembly locks (single groove) guarantee a tight and perfectly aligned panel connection. Anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluFix AluFix AL AluFix AL 22-138-25 250/75 1.88 38.11 AluFix Construction height 10 cm, frame profile width 23 mm. Four tie holes per panel height 350 cm, three tie holes per panel height 300, 270 and 250 cm, two tie holes per panel height 150 and 135 cm. The frames of the AF panels are made of closed 3-chamber aluminium profiles (double groove) or 2-chamber aluminium profiles (single groove) and are torsion-proof. They are easy to clean thanks to their high-quality annealed powder coating. The AluFix AL panels are equipped with alkus facing. All-around grooves and EA assembly locks (double groove) or E assembly locks (single groove) guarantee a tight and perfectly aligned panel connection. Anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluFix AluFix AL AluFix AL 22-138-45 250/55 1.38 29.93 AluFix Construction height 10 cm, frame profile width 23 mm. Four tie holes per panel height 350 cm, three tie holes per panel height 300, 270 and 250 cm, two tie holes per panel height 150 and 135 cm. The frames of the AF panels are made of closed 3-chamber aluminium profiles (double groove) or 2-chamber aluminium profiles (single groove) and are torsion-proof. They are easy to clean thanks to their high-quality annealed powder coating. The AluFix AL panels are equipped with alkus facing. All-around grooves and EA assembly locks (double groove) or E assembly locks (single groove) guarantee a tight and perfectly aligned panel connection. Anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluFix AluFix AL AluFix AL 22-138-60 250/40 1.55 23.56 AluFix Construction height 10 cm, frame profile width 23 mm. Four tie holes per panel height 350 cm, three tie holes per panel height 300, 270 and 250 cm, two tie holes per panel height 150 and 135 cm. The frames of the AF panels are made of closed 3-chamber aluminium profiles (double groove) or 2-chamber aluminium profiles (single groove) and are torsion-proof. They are easy to clean thanks to their high-quality annealed powder coating. The AluFix AL panels are equipped with alkus facing. All-around grooves and EA assembly locks (double groove) or E assembly locks (single groove) guarantee a tight and perfectly aligned panel connection. Anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluFix AluFix AL AluFix AL 22-138-75 250/25 0.63 17.44 AluFix Construction height 10 cm, frame profile width 23 mm. Four tie holes per panel height 350 cm, three tie holes per panel height 300, 270 and 250 cm, two tie holes per panel height 150 and 135 cm. The frames of the AF panels are made of closed 3-chamber aluminium profiles (double groove) or 2-chamber aluminium profiles (single groove) and are torsion-proof. They are easy to clean thanks to their high-quality annealed powder coating. The AluFix AL panels are equipped with alkus facing. All-around grooves and EA assembly locks (double groove) or E assembly locks (single groove) guarantee a tight and perfectly aligned panel connection. Anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluFix AluFix AL AluFix AL 22-135-10 150/90 1.35 27.41 AluFix Construction height 10 cm, frame profile width 23 mm. Four tie holes per panel height 350 cm, three tie holes per panel height 300, 270 and 250 cm, two tie holes per panel height 150 and 135 cm. The frames of the AF panels are made of closed 3-chamber aluminium profiles (double groove) or 2-chamber aluminium profiles (single groove) and are torsion-proof. They are easy to clean thanks to their high-quality annealed powder coating. The AluFix AL panels are equipped with alkus facing. All-around grooves and EA assembly locks (double groove) or E assembly locks (single groove) guarantee a tight and perfectly aligned panel connection. Anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluFix AluFix AL AluFix AL 22-135-25 150/75 1.13 23.30 AluFix Construction height 10 cm, frame profile width 23 mm. Four tie holes per panel height 350 cm, three tie holes per panel height 300, 270 and 250 cm, two tie holes per panel height 150 and 135 cm. The frames of the AF panels are made of closed 3-chamber aluminium profiles (double groove) or 2-chamber aluminium profiles (single groove) and are torsion-proof. They are easy to clean thanks to their high-quality annealed powder coating. The AluFix AL panels are equipped with alkus facing. All-around grooves and EA assembly locks (double groove) or E assembly locks (single groove) guarantee a tight and perfectly aligned panel connection. Anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluFix AluFix AL AluFix AL 22-135-45 150/55 0.95 18.58 AluFix Construction height 10 cm, frame profile width 23 mm. Four tie holes per panel height 350 cm, three tie holes per panel height 300, 270 and 250 cm, two tie holes per panel height 150 and 135 cm. The frames of the AF panels are made of closed 3-chamber aluminium profiles (double groove) or 2-chamber aluminium profiles (single groove) and are torsion-proof. They are easy to clean thanks to their high-quality annealed powder coating. The AluFix AL panels are equipped with alkus facing. All-around grooves and EA assembly locks (double groove) or E assembly locks (single groove) guarantee a tight and perfectly aligned panel connection. Anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluFix AluFix AL AluFix AL 22-135-60 150/40 0.60 14.89 AluFix Construction height 10 cm, frame profile width 23 mm. Four tie holes per panel height 350 cm, three tie holes per panel height 300, 270 and 250 cm, two tie holes per panel height 150 and 135 cm. The frames of the AF panels are made of closed 3-chamber aluminium profiles (double groove) or 2-chamber aluminium profiles (single groove) and are torsion-proof. They are easy to clean thanks to their high-quality annealed powder coating. The AluFix AL panels are equipped with alkus facing. All-around grooves and EA assembly locks (double groove) or E assembly locks (single groove) guarantee a tight and perfectly aligned panel connection. Anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluFix AluFix AL AluFix AL 22-135-75 150/25 0.38 10.10 AluFix Construction height 10 cm, frame profile width 23 mm. Four tie holes per panel height 350 cm, three tie holes per panel height 300, 270 and 250 cm, two tie holes per panel height 150 and 135 cm. The frames of the AF panels are made of closed 3-chamber aluminium profiles (double groove) or 2-chamber aluminium profiles (single groove) and are torsion-proof. They are easy to clean thanks to their high-quality annealed powder coating. The AluFix AL panels are equipped with alkus facing. All-around grooves and EA assembly locks (double groove) or E assembly locks (single groove) guarantee a tight and perfectly aligned panel connection. Anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluFix AluFix AL AluFix AL 22-139-10 135/90 1.22 24.05 AluFix Construction height 10 cm, frame profile width 23 mm. Four tie holes per panel height 350 cm, three tie holes per panel height 300, 270 and 250 cm, two tie holes per panel height 150 and 135 cm. The frames of the AF panels are made of closed 3-chamber aluminium profiles (double groove) or 2-chamber aluminium profiles (single groove) and are torsion-proof. They are easy to clean thanks to their high-quality annealed powder coating. The AluFix AL panels are equipped with alkus facing. All-around grooves and EA assembly locks (double groove) or E assembly locks (single groove) guarantee a tight and perfectly aligned panel connection. Anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluFix AluFix AL AluFix AL 22-139-25 135/75 1.01 20.72 AluFix Construction height 10 cm, frame profile width 23 mm. Four tie holes per panel height 350 cm, three tie holes per panel height 300, 270 and 250 cm, two tie holes per panel height 150 and 135 cm. The frames of the AF panels are made of closed 3-chamber aluminium profiles (double groove) or 2-chamber aluminium profiles (single groove) and are torsion-proof. They are easy to clean thanks to their high-quality annealed powder coating. The AluFix AL panels are equipped with alkus facing. All-around grooves and EA assembly locks (double groove) or E assembly locks (single groove) guarantee a tight and perfectly aligned panel connection. Anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluFix AluFix AL AluFix AL 22-139-45 135/55 0.74 16.31 AluFix Construction height 10 cm, frame profile width 23 mm. Four tie holes per panel height 350 cm, three tie holes per panel height 300, 270 and 250 cm, two tie holes per panel height 150 and 135 cm. The frames of the AF panels are made of closed 3-chamber aluminium profiles (double groove) or 2-chamber aluminium profiles (single groove) and are torsion-proof. They are easy to clean thanks to their high-quality annealed powder coating. The AluFix AL panels are equipped with alkus facing. All-around grooves and EA assembly locks (double groove) or E assembly locks (single groove) guarantee a tight and perfectly aligned panel connection. Anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluFix AluFix AL AluFix AL 22-139-60 135/40 0.54 12.81 AluFix Construction height 10 cm, frame profile width 23 mm. Four tie holes per panel height 350 cm, three tie holes per panel height 300, 270 and 250 cm, two tie holes per panel height 150 and 135 cm. The frames of the AF panels are made of closed 3-chamber aluminium profiles (double groove) or 2-chamber aluminium profiles (single groove) and are torsion-proof. They are easy to clean thanks to their high-quality annealed powder coating. The AluFix AL panels are equipped with alkus facing. All-around grooves and EA assembly locks (double groove) or E assembly locks (single groove) guarantee a tight and perfectly aligned panel connection. Anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluFix AluFix AL AluFix AL 22-139-75 135/25 0.34 12.81 AluFix Construction height 10 cm, frame profile width 23 mm. Four tie holes per panel height 350 cm, three tie holes per panel height 300, 270 and 250 cm, two tie holes per panel height 150 and 135 cm. The frames of the AF panels are made of closed 3-chamber aluminium profiles (double groove) or 2-chamber aluminium profiles (single groove) and are torsion-proof. They are easy to clean thanks to their high-quality annealed powder coating. The AluFix AL panels are equipped with alkus facing. All-around grooves and EA assembly locks (double groove) or E assembly locks (single groove) guarantee a tight and perfectly aligned panel connection. Anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluFix Foundation tape Foundation tape 50 m 29-307-50 20.00 AluFix Galvanized. Hole spacing 50 mm, hole Ø 16 mm, length 50 m. Adm. tractive force 10 kN. To be cut at hole center. Together with the appropriate tensioner it serves as bottom tie when panels are assembled in horizontal position.
AluFix Tensioner EA for foundation tape Tensioner EA for foundation tape 29-307-75 1.26 AluFix Galvanized. Connects the foundation tape to EcoAs or AluFix-panels and serves as bottom tie when panels are assembled in horizontal position. Two tensioners are required per tieing position.
AluFix Trolley for foundation tape Trolley for foundation tape 29-307-55 21.80 AluFix Not shown. Galvanized. Is used to transport and cut foundation tape to length. Suitable for one roll. Pneumatic wheels.
AluFix AluFix AL-IC AluFix AL-IC 22-154-05 350/20 1.40 30.80 AluFix AF inside corner Aluminium. With annealead power coating. For 90° corners, side length 20 cm.
AluFix AluFix AL-IC AluFix AL-IC 22-154-10 300/20 1.20 26.08 AluFix AF inside corner Aluminium. With annealead power coating. For 90° corners, side length 20 cm.
AluFix AluFix AL-IC AluFix AL-IC 22-154-15 270/20 1.08 23.81 AluFix AF inside corner Aluminium. With annealead power coating. For 90° corners, side length 20 cm.
AluFix AluFix AL-IC AluFix AL-IC 22-154-25 250/20 1.00 21.98 AluFix AF inside corner Aluminium. With annealead power coating. For 90° corners, side length 20 cm.
AluFix AluFix AL-IC AluFix AL-IC 22-154-30 150/20 0.60 13.55 AluFix AF inside corner Aluminium. With annealead power coating. For 90° corners, side length 20 cm.
AluFix AluFix AL-IC AluFix AL-IC 22-154-35 135/20 0.54 12.90 AluFix AF inside corner Aluminium. With annealead power coating. For 90° corners, side length 20 cm.
AluFix AluFix OC AluFix OC 22-150-01 350 107.00 AluFix AF outside corner Aluminium. With annealed powder coating. Provides a tight outside corner assembly for 90° angles when used together with AF panels and EA assembly locks (double groove) or E assembly locks (single groove).
AluFix AluFix OC AluFix OC 22-150-02 300 9.20 AluFix AF outside corner Aluminium. With annealed powder coating. Provides a tight outside corner assembly for 90° angles when used together with AF panels and EA assembly locks (double groove) or E assembly locks (single groove).
AluFix AluFix OC AluFix OC 22-150-03 270 8.20 AluFix AF outside corner Aluminium. With annealed powder coating. Provides a tight outside corner assembly for 90° angles when used together with AF panels and EA assembly locks (double groove) or E assembly locks (single groove).
AluFix AluFix OC AluFix OC 22-150-06 250 7.60 AluFix AF outside corner Aluminium. With annealed powder coating. Provides a tight outside corner assembly for 90° angles when used together with AF panels and EA assembly locks (double groove) or E assembly locks (single groove).
AluFix AluFix OC AluFix OC 22-150-12 150 4.70 AluFix AF outside corner Aluminium. With annealed powder coating. Provides a tight outside corner assembly for 90° angles when used together with AF panels and EA assembly locks (double groove) or E assembly locks (single groove).
AluFix AluFix OC AluFix OC 22-150-14 135 4.30 AluFix AF outside corner Aluminium. With annealed powder coating. Provides a tight outside corner assembly for 90° angles when used together with AF panels and EA assembly locks (double groove) or E assembly locks (single groove).
AluFix AluFix HIC AluFix HIC 22-151-90 150 0.60 35.00 AluFix AF hinged inside corner, Steel construction with steel sheeting. Primed and cavity-sealed. Side length 20 cm. Adjustable angle 80°–180° when used as inside corner, or 95°–180° when used as outside corner.
AluFix AluFix HIC AluFix HIC 22-151-92 135 0.54 30.60 AluFix AF hinged inside corner, Steel construction with steel sheeting. Primed and cavity-sealed. Side length 20 cm. Adjustable angle 80°–180° when used as inside corner, or 95°–180° when used as outside corner.
AluFix AluFix HOC AluFix HOC 22-151-70 150 0.60 20.50 AluFix AF hinged outside corner, steel construction with steel sheeting. Primed and cavity-sealed. Side length 1.5 cm. Adjustable angle 0°–120°.
AluFix AluFix HOC AluFix HOC 22-151-72 135 0.54 18.30 AluFix AF hinged outside corner, steel construction with steel sheeting. Primed and cavity-sealed. Side length 1.5 cm. Adjustable angle 0°–120°.
AluFix AluFix BP AluFix BP 22-133-09 350/90 3.15 58.08 AluFix The AluFix BP panels are equipped withbirch-ply facing.
AluFix AluFix BP AluFix BP 22-133-24 350/75 2.63 49.04 AluFix The AluFix BP panels are equipped withbirch-ply facing.
AluFix AluFix BP AluFix BP 22-133-44 350/55 1.93 38.74 AluFix The AluFix BP panels are equipped withbirch-ply facing.
AluFix AluFix BP AluFix BP 22-133-59 350/40 1.40 30.72 AluFix The AluFix BP panels are equipped withbirch-ply facing.
AluFix AluFix BP AluFix BP 22-133-74 350/25 0.88 23.03 AluFix The AluFix BP panels are equipped withbirch-ply facing.
AluFix AluFix BP AluFix BP 22-134-24 300/75 2.25 42.84 AluFix The AluFix BP panels are equipped withbirch-ply facing.
AluFix AluFix BP AluFix BP 22-134-44 300/55 1.65 34.46 AluFix The AluFix BP panels are equipped withbirch-ply facing.
AluFix AluFix BP AluFix BP 22-134-59 300/40 1.20 27.93 AluFix The AluFix BP panels are equipped withbirch-ply facing.
AluFix AluFix BP AluFix BP 22-134-74 300/25 0.75 20.35 AluFix The AluFix BP panels are equipped withbirch-ply facing.
AluFix AluFix BP AluFix BP 22-137-09 270/90 2.43 44.35 AluFix The AluFix BP panels are equipped withbirch-ply facing.
AluFix AluFix BP AluFix BP 22-137-24 270/75 2.02 38.49 AluFix The AluFix BP panels are equipped withbirch-ply facing.
AluFix AluFix BP AluFix BP 22-137-44 270/55 1.49 29.61 AluFix The AluFix BP panels are equipped withbirch-ply facing.
AluFix AluFix BP AluFix BP 22-137-59 270/40 1.08 23.50 AluFix The AluFix BP panels are equipped withbirch-ply facing.
AluFix AluFix BP AluFix BP 22-137-74 270/25 0.68 17.64 AluFix The AluFix BP panels are equipped withbirch-ply facing.
AluFix AluFix BP AluFix BP 22-138-09 250/90 2.25 42.09 AluFix The AluFix BP panels are equipped withbirch-ply facing.
AluFix AluFix BP AluFix BP 22-138-24 250/75 1.88 35.50 AluFix The AluFix BP panels are equipped withbirch-ply facing.
AluFix AluFix BP AluFix BP 22-138-44 250/55 1.38 28.03 AluFix The AluFix BP panels are equipped withbirch-ply facing.
AluFix AluFix BP AluFix BP 22-138-59 250/40 1.55 22.19 AluFix The AluFix BP panels are equipped withbirch-ply facing.
AluFix AluFix BP AluFix BP 22-138-74 250/25 0.63 16.60 AluFix The AluFix BP panels are equipped withbirch-ply facing.
AluFix AluFix BP AluFix BP 22-135-09 150/90 1.35 25.51 AluFix The AluFix BP panels are equipped withbirch-ply facing.
AluFix AluFix BP AluFix BP 22-135-24 150/75 1.13 21.72 AluFix The AluFix BP panels are equipped withbirch-ply facing.
AluFix AluFix BP AluFix BP 22-135-44 150/55 0.95 17.42 AluFix The AluFix BP panels are equipped withbirch-ply facing.
AluFix AluFix BP AluFix BP 22-135-59 150/40 0.60 14.05 AluFix The AluFix BP panels are equipped withbirch-ply facing.
AluFix AluFix BP AluFix BP 22-135-74 150/25 0.38 9.62 AluFix The AluFix BP panels are equipped withbirch-ply facing.
AluFix AluFix BP AluFix BP 22-139-09 135/90 1.22 22.15 AluFix The AluFix BP panels are equipped withbirch-ply facing.
AluFix AluFix BP AluFix BP 22-139-24 135/75 1.01 19.32 AluFix The AluFix BP panels are equipped withbirch-ply facing.
AluFix AluFix BP AluFix BP 22-139-44 135/55 0.74 15.28 AluFix The AluFix BP panels are equipped withbirch-ply facing.
AluFix AluFix BP AluFix BP 22-139-59 135/40 0.54 12.08 AluFix The AluFix BP panels are equipped withbirch-ply facing.
AluFix AluFix BP AluFix BP 22-139-74 135/25 0.34 9.05 AluFix The AluFix BP panels are equipped withbirch-ply facing.
AluFix AluFix SC AluFix SC 22-151-00 350/25 0.88 126.00 AluFix AF stripping corner, aluminium, 3 parts. With annealed powder coating and tie holes. When assembling and stripping the formwork, the AF stripping corners are pressed against and removed from the concrete by using the integrated spanner.
AluFix AluFix SC AluFix SC 22-151-10 300/25 0.75 108.00 AluFix AF stripping corner, aluminium, 3 parts. With annealed powder coating and tie holes. When assembling and stripping the formwork, the AF stripping corners are pressed against and removed from the concrete by using the integrated spanner.
AluFix AluFix SC AluFix SC 22-151-12 270/25 0.68 97.20 AluFix AF stripping corner, aluminium, 3 parts. With annealed powder coating and tie holes. When assembling and stripping the formwork, the AF stripping corners are pressed against and removed from the concrete by using the integrated spanner.
AluFix AluFix SC AluFix SC 22-151-15 250/25 0.62 90.00 AluFix AF stripping corner, aluminium, 3 parts. With annealed powder coating and tie holes. When assembling and stripping the formwork, the AF stripping corners are pressed against and removed from the concrete by using the integrated spanner.
AluFix AluFix SC AluFix SC 22-151-20 150/25 0.38 58.50 AluFix AF stripping corner, aluminium, 3 parts. With annealed powder coating and tie holes. When assembling and stripping the formwork, the AF stripping corners are pressed against and removed from the concrete by using the integrated spanner.
AluFix AluFix SC AluFix SC 22-151-25 135/25 0.34 52.70 AluFix AF stripping corner, aluminium, 3 parts. With annealed powder coating and tie holes. When assembling and stripping the formwork, the AF stripping corners are pressed against and removed from the concrete by using the integrated spanner.
AluFix Adhesive tape, red Adhesive tape 50 m, red 41-912-10 0.83 AluFix Not shown. Reinforced adhesive tape, red, 50 mm wide, 50 running metres. Total thickness: 270 mµ. Natural rubber adhesive on one side. PE-coated.
AluFix Formwork-prop connector for stripping corner Connector for stripping corner 29-306-00 3.10 AluFix Painted. Used to attach the ratchet load tensioner to allow the AF stripping corner to be used. Attached to the AF panel with flange screw 18.
AluFix Ratchet load tensioner Ratchet load tensioner 29-306-05 0.34 AluFix Not shown. Used to activate the AF stripping corner. Attached to the AF panels to the left and right of the stripping corner with two formwork-prop connectors for stripping corner.
AluFix Assembly lock EA-assembly lock 29-205-50 1.50 AluFix Galvanized. Tightly connects and aligns AluFix and EcoAs panels. Clamping length 4.6 cm.
AluFix Uni-assembly lock Uni-assembly lock 22 29-400-85 3.60 AluFix Galvanized. For stepless compensation. Clamping length 22 cm or 28 cm.
AluFix Uni-assembly lock Uni-assembly lock 28 29-400-90 3.90 AluFix Galvanized. For stepless compensation. Clamping length 22 cm or 28 cm.
AluFix RS-assembly lock RS-assembly lock 23-807-70 4.70 AluFix Galvanized, For stepless length compensation. Clamping length is 11.9 to 20.5 cm for stepless compensation.
AluFix E-assembly lock with coupling E-Uni-assembly lock 29-103-60 2.00 AluFix Galvanized. Is used to attach push-pull props at the AluFix and EcoAs panel joints. Clamping length 4.6 cm.
AluFix E-assembly lock with coupling E-Assembly lock with coupling 29-802-70 1.00 AluFix Galvanized. Is used to attach push-pull props at the AluFix and EcoAs panel joints. Clamping length 4.6 cm.
AluFix Transition lock AF-ST/AS Transition lock AF - ST/AS 29-103-30 3.20 AluFix Is used as a connecting assembly lock at the joint of AF panels with ST or AS panels. Can be used on the right or left side of inside corner areas by turning the sliding part.
AluFix Flange screw Flange screw 18 29-401-10 1.10 AluFix Galvanized. DW thread Ø 15 mm. Is used to attach accessories, e.g. alignment rails, brace frames, push-pull props, etc. Length of thread 18 cm or 27 cm.
AluFix Flange screw Flange screw 28 29-401-12 1.23 AluFix Galvanized. DW thread Ø 15 mm. Is used to attach accessories, e.g. alignment rails, brace frames, push-pull props, etc. Length of thread 18 cm or 27 cm.
AluFix AF compensation profile AF-compensation profile 264 29-200-20 24.00 AluFix Steel frame profile with angles. Primed and cavity-sealed. Is clamped to the AF panel with two E assembly locks and used for job-built fillers consisting of short squared timber and a facing. Delivery and weight by pairs.
AluFix AF compensation profile AF-compensation profile 132 29-200-30 12.00 AluFix Steel frame profile with angles. Primed and cavity-sealed. Is clamped to the AF panel with two E assembly locks and used for job-built fillers consisting of short squared timber and a facing. Delivery and weight by pairs.
AluFix Corner angle 40/60 Corner angle 40/60 29-402-25 9.50 AluFix Galvanized. Side lengths 40 cm and 60 cm. For inside and outside corners and column formwork.
AluFix Plug D20 Plug D20 29-902-63 0.20 AluFix Is used to close unused tie holes (AluFix, EcoAs, AluStar and StarTec).
AluFix Plug D20 Plug D20 without imprint 29-902-62 0.20 AluFix Is used to close unused tie holes (AluFix, EcoAs, AluStar and StarTec).
AluFix AS alignment rail AS-alignment rail 50, galv. 29-201-73 5.20 AluFix Galvanized. Is used to brace panel joints for crane ganging, bridge problem areas, brace compensation areas and build stop ends with stop end fixtures. Is attached to the formwork with flange screws.
AluFix AS alignment rail AS-alignment rail 125, galv. 29-201-75 10.50 AluFix Galvanized. Is used to brace panel joints for crane ganging, bridge problem areas, brace compensation areas and build stop ends with stop end fixtures. Is attached to the formwork with flange screws.
AluFix AS alignment rail AS-alignment rail 200, galv. 29-201-80 19.00 AluFix Galvanized. Is used to brace panel joints for crane ganging, bridge problem areas, brace compensation areas and build stop ends with stop end fixtures. Is attached to the formwork with flange screws.
AluFix Tie rod DW 15/90 Tie rod DW 15/90 29-900-80 1.25 AluFix Uncoated, not weldable. DW thread Ø 15 mm. Adm. load capacity 90 kN (DIN 18216). Is used to tie panels of a double-sided formwork.
AluFix Tie wrench DW15/DW20 Tie wrench DW15/DW20 29-901-39 4.50 AluFix Made of steel, galvanized. Used to screw in, screw out and hold tie rods DW15 and DW20; length 400 mm.
AluFix Tie rod holder Tie rod fixture Ø35 29-927-05 1.20 AluFix Galvanised. To hold DW tie rods with articulated flange nut, XT tie rods or XT taper ties. Can be used with horizontal or vertical MEVA wall formwork panels.
AluFix Plastic tube Plastic tube D22/200 29-902-30 8.75 AluFix Plastic spacer tube for tie holes. Two cones are also required per tie hole. Internal Ø 22 mm, external Ø 28 mm, standard length 2.00 m.
AluFix Cone for plastic tube Cone for plastic tube D22/10 (10 mm covering) 29-902-40 13.00 AluFix Available with 10 mm or 30 mm covering .
AluFix Cone for plastic tube Cone for plastic tube D22/30 (30 mm covering) 29-902-50 3.25 AluFix Available with 10 mm or 30 mm covering .
AluFix Articulated flange nut 15/120 Articulated flange nut 15/120 (SW 27) 29-900-10 1.81 AluFix Forged, galvanized. DIN 18218. DW thread Ø 15 mm, plate Ø 120 mm, max. inclination 10°, SW 27. Max. load capacity 90 kN. Reduces wear of panel coating.
AluFix Articulated flange nut 15/120 Articulated flange nut AF - ST/AS 29-900-18 2.32 AluFix Forged, galvanized. DIN 18218. DW thread Ø 15 mm, plate Ø 120 mm, max. inclination 10°, SW 27. Max. load capacity 90 kN. Reduces wear of panel coating.
AluFix Spanner SW 27 Spanner SW 27 29-800-10 1.80 AluFix Inset yellow chromated. Spanner width (SW) 27 mm. Is used to tighten and loosen flange nuts 100, articulated flange nuts 15/120 and flange screws.
AluFix Drive nut 60 Drive nut 60 29-900-23 0.50 AluFix Galvanized. DW thread Ø 15 mm, plate Ø 60 mm. Adm. load capacity 90 kN (DIN 18216). Is used to tie the formwork to the ground or to a wall connection.
AluFix Tie claw 23 Tie claw 23 29-901-44 0.17 AluFix Galvanized. Permits tieing (with tie rod DW 15 and flange nut 100) directly above or beside EcoAs and AluFix panels.
AluFix Crane hooks EA/AF-crane hook 29-103-05 6.00 AluFix Coated. Is used to move and crane-gang AluFix and EcoAs panels. Self-locking. Load capacity 6 kN (600 kg). Always two crane hooks required per gang. Refer to the crane hook Operating Instructions for application and safety test.
AluFix Brace frame 250 Brace frame 250 with formwork-prop connector 29-109-20 31.50 AluFix Galvanized. Available with formwork-prop connector. Is used to align and brace the formwork. Consists of a push-pull prop R 250 (190–320 cm), a brace SRL 120 (90–150 cm) and a double-jointed footplate.The formwork-prop connectors are attached to the formwork with flange screws 18.
AluFix Formwork-prop connector Formwork-prop connector 29-804-85 1.65 AluFix Galvanized. Connects braces, brace frames and push-pull props (max. Ø 48 mm) to the multi-function profile with a flange screw 18. Delivery includes head bolt 16/90 and cotter pin 4.
AluFix Walkway bracket Walkway bracket 90 (yellow), galv. 29-106-00 10.30 AluFix Galvanized, yellow, pluggable. Is used as working and safety scaffold. Is attached to the multi-function profile and secured to the multi-function profile below with a flange screw 18. The planking can be mounted to the brackets. Working width approx. 90 cm. MEVA Guard-railing post is also required. Bracket spacing depends on type of planking (DIN 4420).
AluFix Walkway bracket Walkway bracket E 29-104-82 8.00 AluFix Galvanized, yellow, pluggable. Is used as working and safety scaffold. Is attached to the multi-function profile and secured to the multi-function profile below with a flange screw 18. The planking can be mounted to the brackets. Working width approx. 90 cm. MEVA Guard-railing post is also required. Bracket spacing depends on type of planking (DIN 4420).
AluFix Side railing Side railing 90/100, galv. 29-108-20 12.30 AluFix Galvanized. Is plugged into the walkway bracket.
AluFix Side railing Side railing 125/100, galv. 29-108-30 13.80 AluFix Galvanized. Is plugged into the walkway bracket.
AluFix Guard-railing post Guard-railing post 100 29-106-75 3.70 AluFix Galvanized. Is plugged into the walkway bracket.
AluFix Guard-railing post Guard-railing post 140 29-106-85 4.70 AluFix Galvanized. Is plugged into the walkway bracket.
AluFix Guard-railing post 48 Guard-railing post 48/120 (UK) 29-106-80 5.50 AluFix Galvanized. With manifold to be plugged into the walkway bracket and with 48 mm Ø tube to attach scaffold couplers.
AluFix Guard-railing post 48 Guard-railing post 48/134 29-920-80 5.45 AluFix Galvanized. With manifold to be plugged into the walkway bracket and with 48 mm Ø tube to attach scaffold couplers.
AluFix Tilting bracket 23 Tilting bracket 23 29-920-84 4.77 AluFix Galvanised. Used to attach MEVA guardrailing posts to create a fall protection system. It can be set up vertically to facilitate the installation of safety meshes or railing boards or inclined by 15° to create a larger working area. Secured with a wedge to the frame profile of 23 mm.
AluFix Scaffold tube Scaffold tube 48/200 29-412-23 9.40 AluFix Galvanized. Is used as hand-rail / mid-rail in combination with guard-railing post 48.
AluFix Scaffold tube Scaffold tube 48/300 29-412-26 14.10 AluFix Galvanized. Is used as hand-rail / mid-rail in combination with guard-railing post 48.
AluFix Scaffold tube Scaffold tube 48/400 29-412-27 18.80 AluFix Galvanized. Is used as hand-rail / mid-rail in combination with guard-railing post 48.
AluFix Scaffold tube Scaffold tube 48/500 29-412-25 23.50 AluFix Galvanized. Is used as hand-rail / mid-rail in combination with guard-railing post 48.
AluFix Scaffold tube Scaffold tube 48/600 29-412-28 28.20 AluFix Galvanized. Is used as hand-rail / mid-rail in combination with guard-railing post 48.
AluFix Swivel-joint coupler 48/48 Swivel-joint coupler 48/48 29-412-52 1.20 AluFix Galvanized. Connects 2 scaffold tubes with Ø 48,3 mm at any angle required.
AluFix Transport angle Transport angle 10, rigid type 29-305-15 10.40 AluFix Is used to stack and transport 5 to 12 EcoAs or AluFix panels. Distance between holes 10 cm. We recommend using 2 foldable angles and 2 angles of the rigid type per stack. Max. load capacity is 10 kN per angle. For safety reasons consider 20 kN as maximum capacity for the whole stack.
AluFix Transport angle Transport angle 10 29-305-10 16.00 AluFix Is used to stack and transport 5 to 12 EcoAs or AluFix panels. Distance between holes 10 cm. We recommend using 2 foldable angles and 2 angles of the rigid type per stack. Max. load capacity is 10 kN per angle. For safety reasons consider 20 kN as maximum capacity for the whole stack.
AluFix Safety plug AS/ST stacks, black Safety plug AS/ST stacks, black 40-131-10 19.00 AluFix Plastic, black. Secures stacked AluFix, EcoAs, AluStar and StarTec panels.
AluFix AF prop head AF-prop head 29-202-80 1.53 AluFix Painted. Supports AluFix panels for slabs up to 46 cm thick. The prop head is plugged to the prop’s head or foot plate and secured with pin 14/90 (or with pin 14/135 to the outer tube of the MEP prop).
AluFix Tripod Tripod 29-905-50 12.20 AluFix Galvanized auxiliary to stabilize props with Ø 48 to 80 mm. The turnable legs allow the tripod to be used in rooms, along walls or in corners. The tripod can be attached to the aluminium profile of the MEP props with the MD safety claw.
AluFix Tripod Tripod 120 29-905-52 17.70 AluFix Galvanized auxiliary to stabilize props with Ø 48 to 80 mm. The turnable legs allow the tripod to be used in rooms, along walls or in corners. The tripod can be attached to the aluminium profile of the MEP props with the MD safety claw.
AluFix Pin Pin 14/90 29-909-94 0.13 AluFix Galvanized. Is used to attach MD drop heads, MD prop heads of forked prop heads, etc. to the props. Pin 14/90 is used for steel tube props up to Ø 63 mm. Pin 14/135 is used with the aluminium profile of MEP props and MEP extension pieces.
AluFix Pin Pin 14/135 29-909-90 0.18 AluFix Galvanized. Is used to attach MD drop heads, MD prop heads of forked prop heads, etc. to the props. Pin 14/90 is used for steel tube props up to Ø 63 mm. Pin 14/135 is used with the aluminium profile of MEP props and MEP extension pieces.
AluFix EuMax 30 EuMax 30/150 29-907-46 10.40 AluFix Galvanized. According to European Standard EN 1065, class E. Admissible load capacity 30 kN. Higher load capacities are permitted when used with MEVA formwork (see the MevaDec Technical Instruction Manual).
AluFix EuMax 30 EuMax 30/250 29-907-51 18.10 AluFix Galvanized. According to European Standard EN 1065, class E. Admissible load capacity 30 kN. Higher load capacities are permitted when used with MEVA formwork (see the MevaDec Technical Instruction Manual).
AluFix EuMax 30 EuMax 30/350 29-907-61 23.00 AluFix Galvanized. According to European Standard EN 1065, class E. Admissible load capacity 30 kN. Higher load capacities are permitted when used with MEVA formwork (see the MevaDec Technical Instruction Manual).
AluFix EuMax 30 EuMax 30/450 29-907-62 32.40 AluFix Galvanized. According to European Standard EN 1065, class E. Admissible load capacity 30 kN. Higher load capacities are permitted when used with MEVA formwork (see the MevaDec Technical Instruction Manual).
AluFix EuMax 20 EuMax 20/300 29-907-36 16.90 AluFix Galvanized. According to the European Standard EN 1065, class D. The admissible load capacity is 20 kN at any extension. Higher load capacities are permitted when used with MEVA formwork (see the MevaDec Technical Instruction Manual).
AluFix EuMax 20 EuMax 20/400 29-907-41 23.80 AluFix Galvanized. According to the European Standard EN 1065, class D. The admissible load capacity is 20 kN at any extension. Higher load capacities are permitted when used with MEVA formwork (see the MevaDec Technical Instruction Manual).
AluFix EuMax 20 EuMax 20/550 29-907-45 37.00 AluFix Galvanized. According to the European Standard EN 1065, class D. The admissible load capacity is 20 kN at any extension. Higher load capacities are permitted when used with MEVA formwork (see the MevaDec Technical Instruction Manual).
AluStar AS panels AS-panel AL 17 22-083-01 270/ 90 2.43 65.05 AluStar Construction height 12 cm, frame profile width 40 mm. Two tie holes per panel height 270 cm, one tie holes per panel height 135 cm and 90 cm. Absolutely compatible with StarTec panels. The frames of AS panels are made of closed 2-chamber aluminium profiles and are torsion-proof. Thanks to their high-quality annealed powder coating they are easy to clean. AS panelsare equipped with alkus facing and ergonomic grip profiles. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluStar AS panels AS-panel AL 17 22-084-01 270/ 75 2.03 60.20 AluStar Construction height 12 cm, frame profile width 40 mm. Two tie holes per panel height 270 cm, one tie holes per panel height 135 cm and 90 cm. Absolutely compatible with StarTec panels. The frames of AS panels are made of closed 2-chamber aluminium profiles and are torsion-proof. Thanks to their high-quality annealed powder coating they are easy to clean. AS panelsare equipped with alkus facing and ergonomic grip profiles. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluStar AS panels AS-panel AL 17 22-084-31 270/ 55 1.49 48.60 AluStar Construction height 12 cm, frame profile width 40 mm. Two tie holes per panel height 270 cm, one tie holes per panel height 135 cm and 90 cm. Absolutely compatible with StarTec panels. The frames of AS panels are made of closed 2-chamber aluminium profiles and are torsion-proof. Thanks to their high-quality annealed powder coating they are easy to clean. AS panelsare equipped with alkus facing and ergonomic grip profiles. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluStar AS panels AS-panel AL 17 22-084-34 270/ 50 1.35 39.10 AluStar Construction height 12 cm, frame profile width 40 mm. Two tie holes per panel height 270 cm, one tie holes per panel height 135 cm and 90 cm. Absolutely compatible with StarTec panels. The frames of AS panels are made of closed 2-chamber aluminium profiles and are torsion-proof. Thanks to their high-quality annealed powder coating they are easy to clean. AS panelsare equipped with alkus facing and ergonomic grip profiles. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluStar AS panels AS-panel AL 17 22-084-37 270/ 49 1.32 39.00 AluStar Construction height 12 cm, frame profile width 40 mm. Two tie holes per panel height 270 cm, one tie holes per panel height 135 cm and 90 cm. Absolutely compatible with StarTec panels. The frames of AS panels are made of closed 2-chamber aluminium profiles and are torsion-proof. Thanks to their high-quality annealed powder coating they are easy to clean. AS panelsare equipped with alkus facing and ergonomic grip profiles. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluStar AS panels AS-panel AL 17 22-084-46 270/ 45 1.22 36.30 AluStar Construction height 12 cm, frame profile width 40 mm. Two tie holes per panel height 270 cm, one tie holes per panel height 135 cm and 90 cm. Absolutely compatible with StarTec panels. The frames of AS panels are made of closed 2-chamber aluminium profiles and are torsion-proof. Thanks to their high-quality annealed powder coating they are easy to clean. AS panelsare equipped with alkus facing and ergonomic grip profiles. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluStar AS panels AS-panel AL 17 22-084-56 270/ 40 1.08 33.50 AluStar Construction height 12 cm, frame profile width 40 mm. Two tie holes per panel height 270 cm, one tie holes per panel height 135 cm and 90 cm. Absolutely compatible with StarTec panels. The frames of AS panels are made of closed 2-chamber aluminium profiles and are torsion-proof. Thanks to their high-quality annealed powder coating they are easy to clean. AS panelsare equipped with alkus facing and ergonomic grip profiles. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluStar AS panels AS-panel AL 17 22-084-71 270/ 30 0.81 27.80 AluStar Construction height 12 cm, frame profile width 40 mm. Two tie holes per panel height 270 cm, one tie holes per panel height 135 cm and 90 cm. Absolutely compatible with StarTec panels. The frames of AS panels are made of closed 2-chamber aluminium profiles and are torsion-proof. Thanks to their high-quality annealed powder coating they are easy to clean. AS panelsare equipped with alkus facing and ergonomic grip profiles. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluStar AS panels AS-panel AL 17 22-084-76 270/ 25 0.68 25.00 AluStar Construction height 12 cm, frame profile width 40 mm. Two tie holes per panel height 270 cm, one tie holes per panel height 135 cm and 90 cm. Absolutely compatible with StarTec panels. The frames of AS panels are made of closed 2-chamber aluminium profiles and are torsion-proof. Thanks to their high-quality annealed powder coating they are easy to clean. AS panelsare equipped with alkus facing and ergonomic grip profiles. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluStar AS panels AS-panel AL 17 22-084-81 270/ 24 0.65 24.50 AluStar Construction height 12 cm, frame profile width 40 mm. Two tie holes per panel height 270 cm, one tie holes per panel height 135 cm and 90 cm. Absolutely compatible with StarTec panels. The frames of AS panels are made of closed 2-chamber aluminium profiles and are torsion-proof. Thanks to their high-quality annealed powder coating they are easy to clean. AS panelsare equipped with alkus facing and ergonomic grip profiles. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluStar AS panels AS-panel AL 17 22-084-86 270/ 20 0.54 22.20 AluStar Construction height 12 cm, frame profile width 40 mm. Two tie holes per panel height 270 cm, one tie holes per panel height 135 cm and 90 cm. Absolutely compatible with StarTec panels. The frames of AS panels are made of closed 2-chamber aluminium profiles and are torsion-proof. Thanks to their high-quality annealed powder coating they are easy to clean. AS panelsare equipped with alkus facing and ergonomic grip profiles. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluStar AS panels AS-panel AL 17 22-085-01 135/ 90 1.22 35.50 AluStar Construction height 12 cm, frame profile width 40 mm. Two tie holes per panel height 270 cm, one tie holes per panel height 135 cm and 90 cm. Absolutely compatible with StarTec panels. The frames of AS panels are made of closed 2-chamber aluminium profiles and are torsion-proof. Thanks to their high-quality annealed powder coating they are easy to clean. AS panelsare equipped with alkus facing and ergonomic grip profiles. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluStar AS panels AS-panel AL 17 22-086-01 135/ 75 1.01 31.20 AluStar Construction height 12 cm, frame profile width 40 mm. Two tie holes per panel height 270 cm, one tie holes per panel height 135 cm and 90 cm. Absolutely compatible with StarTec panels. The frames of AS panels are made of closed 2-chamber aluminium profiles and are torsion-proof. Thanks to their high-quality annealed powder coating they are easy to clean. AS panelsare equipped with alkus facing and ergonomic grip profiles. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluStar AS panels AS-panel AL 17 22-086-31 135/ 55 0.74 25.50 AluStar Construction height 12 cm, frame profile width 40 mm. Two tie holes per panel height 270 cm, one tie holes per panel height 135 cm and 90 cm. Absolutely compatible with StarTec panels. The frames of AS panels are made of closed 2-chamber aluminium profiles and are torsion-proof. Thanks to their high-quality annealed powder coating they are easy to clean. AS panelsare equipped with alkus facing and ergonomic grip profiles. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluStar AS panels AS-panel AL 17 22-086-34 135/ 50 0.68 20.40 AluStar Construction height 12 cm, frame profile width 40 mm. Two tie holes per panel height 270 cm, one tie holes per panel height 135 cm and 90 cm. Absolutely compatible with StarTec panels. The frames of AS panels are made of closed 2-chamber aluminium profiles and are torsion-proof. Thanks to their high-quality annealed powder coating they are easy to clean. AS panelsare equipped with alkus facing and ergonomic grip profiles. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluStar AS panels AS-panel AL 17 22-086-37 135/ 49 0.66 20.00 AluStar Construction height 12 cm, frame profile width 40 mm. Two tie holes per panel height 270 cm, one tie holes per panel height 135 cm and 90 cm. Absolutely compatible with StarTec panels. The frames of AS panels are made of closed 2-chamber aluminium profiles and are torsion-proof. Thanks to their high-quality annealed powder coating they are easy to clean. AS panelsare equipped with alkus facing and ergonomic grip profiles. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluStar AS panels AS-panel AL 17 22-086-46 135/ 45 0.61 18.90 AluStar Construction height 12 cm, frame profile width 40 mm. Two tie holes per panel height 270 cm, one tie holes per panel height 135 cm and 90 cm. Absolutely compatible with StarTec panels. The frames of AS panels are made of closed 2-chamber aluminium profiles and are torsion-proof. Thanks to their high-quality annealed powder coating they are easy to clean. AS panelsare equipped with alkus facing and ergonomic grip profiles. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluStar AS panels AS-panel AL 17 22-086-56 135/ 40 0.54 17.40 AluStar Construction height 12 cm, frame profile width 40 mm. Two tie holes per panel height 270 cm, one tie holes per panel height 135 cm and 90 cm. Absolutely compatible with StarTec panels. The frames of AS panels are made of closed 2-chamber aluminium profiles and are torsion-proof. Thanks to their high-quality annealed powder coating they are easy to clean. AS panelsare equipped with alkus facing and ergonomic grip profiles. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluStar AS panels AS-panel AL 17 22-086-71 135/ 30 0.41 14.50 AluStar Construction height 12 cm, frame profile width 40 mm. Two tie holes per panel height 270 cm, one tie holes per panel height 135 cm and 90 cm. Absolutely compatible with StarTec panels. The frames of AS panels are made of closed 2-chamber aluminium profiles and are torsion-proof. Thanks to their high-quality annealed powder coating they are easy to clean. AS panelsare equipped with alkus facing and ergonomic grip profiles. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluStar AS panels AS-panel AL 17 22-086-76 135/ 25 0.34 12.90 AluStar Construction height 12 cm, frame profile width 40 mm. Two tie holes per panel height 270 cm, one tie holes per panel height 135 cm and 90 cm. Absolutely compatible with StarTec panels. The frames of AS panels are made of closed 2-chamber aluminium profiles and are torsion-proof. Thanks to their high-quality annealed powder coating they are easy to clean. AS panelsare equipped with alkus facing and ergonomic grip profiles. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluStar AS panels AS-panel AL 17 22-086-81 135/ 24 0.32 12.60 AluStar Construction height 12 cm, frame profile width 40 mm. Two tie holes per panel height 270 cm, one tie holes per panel height 135 cm and 90 cm. Absolutely compatible with StarTec panels. The frames of AS panels are made of closed 2-chamber aluminium profiles and are torsion-proof. Thanks to their high-quality annealed powder coating they are easy to clean. AS panelsare equipped with alkus facing and ergonomic grip profiles. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluStar AS panels AS-panel AL 17 22-086-86 135/ 20 0.27 11.40 AluStar Construction height 12 cm, frame profile width 40 mm. Two tie holes per panel height 270 cm, one tie holes per panel height 135 cm and 90 cm. Absolutely compatible with StarTec panels. The frames of AS panels are made of closed 2-chamber aluminium profiles and are torsion-proof. Thanks to their high-quality annealed powder coating they are easy to clean. AS panelsare equipped with alkus facing and ergonomic grip profiles. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluStar AS panels AS-panel AL 17 22-087-01 90/ 90 0.81 21.60 AluStar Construction height 12 cm, frame profile width 40 mm. Two tie holes per panel height 270 cm, one tie holes per panel height 135 cm and 90 cm. Absolutely compatible with StarTec panels. The frames of AS panels are made of closed 2-chamber aluminium profiles and are torsion-proof. Thanks to their high-quality annealed powder coating they are easy to clean. AS panelsare equipped with alkus facing and ergonomic grip profiles. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluStar AS panels AS-panel AL 17 22-087-26 90/ 75 0.68 18.60 AluStar Construction height 12 cm, frame profile width 40 mm. Two tie holes per panel height 270 cm, one tie holes per panel height 135 cm and 90 cm. Absolutely compatible with StarTec panels. The frames of AS panels are made of closed 2-chamber aluminium profiles and are torsion-proof. Thanks to their high-quality annealed powder coating they are easy to clean. AS panelsare equipped with alkus facing and ergonomic grip profiles. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluStar AS panels AS-panel AL 17 22-087-46 90/ 55 0.49 14.60 AluStar Construction height 12 cm, frame profile width 40 mm. Two tie holes per panel height 270 cm, one tie holes per panel height 135 cm and 90 cm. Absolutely compatible with StarTec panels. The frames of AS panels are made of closed 2-chamber aluminium profiles and are torsion-proof. Thanks to their high-quality annealed powder coating they are easy to clean. AS panelsare equipped with alkus facing and ergonomic grip profiles. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluStar AS panels AS-panel AL 17 22-087-51 90/ 50 0.45 13.60 AluStar Construction height 12 cm, frame profile width 40 mm. Two tie holes per panel height 270 cm, one tie holes per panel height 135 cm and 90 cm. Absolutely compatible with StarTec panels. The frames of AS panels are made of closed 2-chamber aluminium profiles and are torsion-proof. Thanks to their high-quality annealed powder coating they are easy to clean. AS panelsare equipped with alkus facing and ergonomic grip profiles. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluStar AS panels AS-panel AL 17 22-087-53 90/ 49 0.44 13.40 AluStar Construction height 12 cm, frame profile width 40 mm. Two tie holes per panel height 270 cm, one tie holes per panel height 135 cm and 90 cm. Absolutely compatible with StarTec panels. The frames of AS panels are made of closed 2-chamber aluminium profiles and are torsion-proof. Thanks to their high-quality annealed powder coating they are easy to clean. AS panelsare equipped with alkus facing and ergonomic grip profiles. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluStar AS panels AS-panel AL 17 22-087-56 90/ 45 0.41 12.50 AluStar Construction height 12 cm, frame profile width 40 mm. Two tie holes per panel height 270 cm, one tie holes per panel height 135 cm and 90 cm. Absolutely compatible with StarTec panels. The frames of AS panels are made of closed 2-chamber aluminium profiles and are torsion-proof. Thanks to their high-quality annealed powder coating they are easy to clean. AS panelsare equipped with alkus facing and ergonomic grip profiles. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluStar AS panels AS-panel AL 17 22-087-61 90/ 40 0.36 11.50 AluStar Construction height 12 cm, frame profile width 40 mm. Two tie holes per panel height 270 cm, one tie holes per panel height 135 cm and 90 cm. Absolutely compatible with StarTec panels. The frames of AS panels are made of closed 2-chamber aluminium profiles and are torsion-proof. Thanks to their high-quality annealed powder coating they are easy to clean. AS panelsare equipped with alkus facing and ergonomic grip profiles. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluStar AS panels AS-panel AL 17 22-087-71 90/ 30 0.27 9.50 AluStar Construction height 12 cm, frame profile width 40 mm. Two tie holes per panel height 270 cm, one tie holes per panel height 135 cm and 90 cm. Absolutely compatible with StarTec panels. The frames of AS panels are made of closed 2-chamber aluminium profiles and are torsion-proof. Thanks to their high-quality annealed powder coating they are easy to clean. AS panelsare equipped with alkus facing and ergonomic grip profiles. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluStar AS panels AS-panel AL 17 22-087-76 90/ 25 0.23 8.60 AluStar Construction height 12 cm, frame profile width 40 mm. Two tie holes per panel height 270 cm, one tie holes per panel height 135 cm and 90 cm. Absolutely compatible with StarTec panels. The frames of AS panels are made of closed 2-chamber aluminium profiles and are torsion-proof. Thanks to their high-quality annealed powder coating they are easy to clean. AS panelsare equipped with alkus facing and ergonomic grip profiles. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluStar AS panels AS-panel AL 17 22-087-81 90/ 24 0.22 8.40 AluStar Construction height 12 cm, frame profile width 40 mm. Two tie holes per panel height 270 cm, one tie holes per panel height 135 cm and 90 cm. Absolutely compatible with StarTec panels. The frames of AS panels are made of closed 2-chamber aluminium profiles and are torsion-proof. Thanks to their high-quality annealed powder coating they are easy to clean. AS panelsare equipped with alkus facing and ergonomic grip profiles. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluStar AS panels AS-panel AL 17 22-087-86 90/ 20 0.18 7.60 AluStar Construction height 12 cm, frame profile width 40 mm. Two tie holes per panel height 270 cm, one tie holes per panel height 135 cm and 90 cm. Absolutely compatible with StarTec panels. The frames of AS panels are made of closed 2-chamber aluminium profiles and are torsion-proof. Thanks to their high-quality annealed powder coating they are easy to clean. AS panelsare equipped with alkus facing and ergonomic grip profiles. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
AluStar ST Multi-purpose panel ST-multi-purpose panel AL 17, 270/75 21-212-26 2.03 103.50 AluStar StarTec panel with perforated profiles to be used as column formwork or to concrete pilasters, stop ends, connections to existing walls, corner configurations, etc. Is used in connection with stop end fixture 23/40.
AluStar ST Multi-purpose panel ST-multi-purpose panel AL 17, 135/75 21-212-46 1.01 52.20 AluStar StarTec panel with perforated profiles to be used as column formwork or to concrete pilasters, stop ends, connections to existing walls, corner configurations, etc. Is used in connection with stop end fixture 23/40.
AluStar Foundation tape Foundation tape 50 m 29-307-50 20.00 AluStar Galvanized. Hole spacing 50 mm; hole Ø 16 mm, 50 m. Adm. tractive force 10 kN. To be cut at hole center. Serves together with the appropriate tensioners as bottom anchoring when panels are assembled in horizontal position.
AluStar Tensioner AS/ST for foundation tape Tensioner AS/ST for foundation tape 29-307-70 1.35 AluStar Galvanized. Connects the foundation tape to AluStar or StarTec panels and serves as bottom anchoring when panels are assembled in horizontal position. Two tensioners are required per anchoring position.
AluStar Trolley for foundation tape Trolley for foundation tape 29-307-55 21.80 AluStar Not shown. Galvanized. Is used to transport and cut foundation tape to length. Suitable for one roll. Pneumatic wheels.
AluStar AS inside corner AL AS-inside corner 330/25 AL 22-150-22 1.70 40.70 AluStar Aluminium with high-quality annealed powder coating. For 90° corner configurations. Side length 25 cm. With tie holes.
AluStar AS inside corner AL AS-inside corner 270/25 AL 22-150-24 1.35 33.20 AluStar Aluminium with high-quality annealed powder coating. For 90° corner configurations. Side length 25 cm. With tie holes.
AluStar AS inside corner AL AS-inside corner 135/25 AL 22-150-34 0.68 17.90 AluStar Aluminium with high-quality annealed powder coating. For 90° corner configurations. Side length 25 cm. With tie holes.
AluStar AS inside corner AL AS-inside corner 90/25 AL 22-150-44 0.45 12.80 AluStar Aluminium with high-quality annealed powder coating. For 90° corner configurations. Side length 25 cm. With tie holes.
AluStar AS/ST outside corner AS/ST-outside corner 270 22-140-20 13.00 AluStar Aluminium with high-quality annealed powder coating. Provides together with ST panels and AS assembly locks a fast and stable outside corner assembly for 90° angles.
AluStar AS/ST outside corner AS/ST-outside corner 135 22-140-30 6.80 AluStar Aluminium with high-quality annealed powder coating. Provides together with ST panels and AS assembly locks a fast and stable outside corner assembly for 90° angles.
AluStar AS/ST outside corner AS/ST-outside corner 90 22-140-40 4.80 AluStar Aluminium with high-quality annealed powder coating. Provides together with ST panels and AS assembly locks a fast and stable outside corner assembly for 90° angles.
AluStar Outside corner Alu(minium) Outside corner Alu 270/5 22-140-25 0.27 16.10 AluStar Aluminium with high-quality annealed powder coating. Facing 5 cm wide on both sides, integrated chamfer strip. Provides together with EA panels EA assembly locks a fast and tight outside corner assembly for 90° angles.
AluStar Outside corner Alu(minium) Outside corner Alu 135/5 22-140-35 0.14 8.40 AluStar Aluminium with high-quality annealed powder coating. Facing 5 cm wide on both sides, integrated chamfer strip. Provides together with EA panels EA assembly locks a fast and tight outside corner assembly for 90° angles.
AluStar AS hinged inside corner AS-hinged inside corner 270/30 21-270-00 1.62 73.00 AluStar Steel construction with steel sheeting. Primed and cavity-sealed. Side length 30 cm. Adjustable angle 60°–180°.
AluStar AS hinged inside corner AS-hinged inside corner 135/30 21-270-10 0.81 37.00 AluStar Steel construction with steel sheeting. Primed and cavity-sealed. Side length 30 cm. Adjustable angle 60°–180°.
AluStar AS hinged outside corner AS-hinged outside corner 270/7.5 21-280-00 0.40 45.00 AluStar Steel construction with steel sheeting. Primed and cavity-sealed. Side length 7.5 cm. Adjustable angle 60°–180°.
AluStar AS hinged outside corner AS-hinged outside corner 135/7.5 21-280-10 0.20 22.00 AluStar Steel construction with steel sheeting. Primed and cavity-sealed. Side length 7.5 cm. Adjustable angle 60°–180°.
AluStar ST stripping corner ST stripping corner 270/25 21-262-10 1.35 146.00 AluStar Steel construction with steel sheeting. Primed and cavity-sealed. Side length 25 cm. With tie holes. When the bell-crank lever is pushed upwards with a crowbar, the corner is removed 17.5 mm away from the concrete and the formwork 35 mm away from the concrete on both sides.
AluStar ST stripping corner ST stripping corner 135/25 21-262-30 0.68 82.00 AluStar Steel construction with steel sheeting. Primed and cavity-sealed. Side length 25 cm. With tie holes. When the bell-crank lever is pushed upwards with a crowbar, the corner is removed 17.5 mm away from the concrete and the formwork 35 mm away from the concrete on both sides.
AluStar Adhesive tape, red Adhesive tape 50 m, red 41-912-10 0.83 AluStar Not shown. Reinforced adhesive tape, red, 50 mm wide, 50 running metres. Total thickness: 270 mµ. Natural rubber adhesive on one side. PE-coated.
AluStar Stripping support Stripping support 29-306-30 5.00 AluStar The stripping support is used to easily activate the stripping corner from above. Use a power screwdriver, a ratchet wrench or a spanner to activate the stripping support. The tools must have SW 27 or 30 or 36.
AluStar AS radius panel AS-radius panel 270/15 21-500-00 0.41 38.90 AluStar Steel construction with steel sheeting. Primed and cavity-sealed. Allows the AluStar and StarTec formwork to be used as polygonal formwork.
AluStar AS radius panel AS-radius panel 270/20 21-500-10 0.54 42.70 AluStar Steel construction with steel sheeting. Primed and cavity-sealed. Allows the AluStar and StarTec formwork to be used as polygonal formwork.
AluStar AS radius panel AS-radius panel 270/25 21-500-20 0.68 50.00 AluStar Steel construction with steel sheeting. Primed and cavity-sealed. Allows the AluStar and StarTec formwork to be used as polygonal formwork.
AluStar AS radius panel AS-radius panel 135/15 21-500-40 0.20 21.10 AluStar Steel construction with steel sheeting. Primed and cavity-sealed. Allows the AluStar and StarTec formwork to be used as polygonal formwork.
AluStar AS radius panel AS-radius panel 135/20 21-500-50 0.27 23.00 AluStar Steel construction with steel sheeting. Primed and cavity-sealed. Allows the AluStar and StarTec formwork to be used as polygonal formwork.
AluStar AS radius panel AS-radius panel 135/25 21-500-60 0.34 26.40 AluStar Steel construction with steel sheeting. Primed and cavity-sealed. Allows the AluStar and StarTec formwork to be used as polygonal formwork.
AluStar AS tensioning bow AS-tensioning bow 21-500-95 5.40 AluStar Takes up the anchor load when forming polygonal constructions with radius panels.
AluStar AS assembly lock AS-assembly lock 29-205-00 2.00 AluStar Galvanized. Tightly connects and aligns AluStar and StarTec panels. Clamping length 8 cm.
AluStar Uni-assembly lock Uni-assembly lock 22 29-400-85 3.60 AluStar Galvanized. For stepless compensation. Clamping length 22 cm or 28 cm.
AluStar Uni-assembly lock Uni-assembly lock 28 29-400-90 3.90 AluStar Galvanized. For stepless compensation. Clamping length 22 cm or 28 cm.
AluStar RS-assembly lock RS-assembly lock 23-807-70 4.70 AluStar Galvanized, For stepless length compensation. Clamping length is 11.9 to 20.5 cm for stepless compensation.
AluStar Combi-lock with coupling Combi-lock with coupling 29-804-60 3.70 AluStar Galvanized. Is used to attach the push-pull props at the panel joint of the wall formwork profile widths of 40 and 60 mm. Clamping length 8, 10 and 12 cm.
AluStar Transition lock AF-ST/AS Transition lock AF - ST/AS 29-103-30 3.20 AluStar Is used as a connecting assembly lock at the joint of AF panels with ST or AS panels. Can be used on the right or left side of inside corner areas by turning the sliding part.
AluStar Flange screw Flange screw 18 29-401-10 1.10 AluStar Galvanized. DW thread Ø 15 mm. Is used to attach accessories, e.g. alignment rails, brace frames, push-pull props, etc. Length of thread 18 cm or 27 cm.
AluStar Flange screw Flange screw 28 29-401-12 1.23 AluStar Galvanized. DW thread Ø 15 mm. Is used to attach accessories, e.g. alignment rails, brace frames, push-pull props, etc. Length of thread 18 cm or 27 cm.
AluStar ST aluminium filler ST-aluminium filler 270/5 21-270-60 0.14 7.90 AluStar Aluminium with high-quality powder coating. With tie holes. For length compensation of 5 cm, especially in corners. 2 or 3 Uni-assembly locks are required for each filler.
AluStar ST aluminium filler ST-aluminium filler 135/5 21-270-65 0.07 4.20 AluStar Aluminium with high-quality powder coating. With tie holes. For length compensation of 5 cm, especially in corners. 2 or 3 Uni-assembly locks are required for each filler.
AluStar ST compensation plate ST-compensation plate 330/20 21-300-15 0.66 38.23 AluStar Steel construction with steel sheeting. Primed and cavity-sealed. Is used to compensate gaps of 8 to 20 cm and attached to the panel with 2 assembly locks. Alignment rails must be used to bridge and align the panels with the compensation plate.
AluStar ST compensation plate ST-compensation plate 270/20 21-300-20 0.54 30.00 AluStar Steel construction with steel sheeting. Primed and cavity-sealed. Is used to compensate gaps of 8 to 20 cm and attached to the panel with 2 assembly locks. Alignment rails must be used to bridge and align the panels with the compensation plate.
AluStar ST compensation plate ST-compensation plate 135/20 21-300-30 0.30 15.00 AluStar Steel construction with steel sheeting. Primed and cavity-sealed. Is used to compensate gaps of 8 to 20 cm and attached to the panel with 2 assembly locks. Alignment rails must be used to bridge and align the panels with the compensation plate.
AluStar AS timber profile AS-timber profile 270/21 29-200-03 11.00 AluStar Timber profile with groove. Is used for job-built fillers of 14 cm or more or to connect job-built formwork with 21 mm forming face. Is attached to the AS/ST panels with 2 AS assembly locks. Delivery and weight by pairs.
AluStar AS timber profile AS-timber profile 135/21 29-200-05 5.40 AluStar Timber profile with groove. Is used for job-built fillers of 14 cm or more or to connect job-built formwork with 21 mm forming face. Is attached to the AS/ST panels with 2 AS assembly locks. Delivery and weight by pairs.
AluStar Corner angle 40/60 Corner angle 40/60 29-402-25 9.50 AluStar Galvanized. Side lengths 40 and 60 cm. For inside and outside corners.
AluStar Stop end fixture 23/40 yellow Stop end fixture 23/40 (yellow) 29-402-85 3.00 AluStar Yellow chromated. Is used to attach alignment rails to the panels when forming stop ends are formed. Or is used in connection with multi-purpose panels (EcoAs, StarTec) to form outer corners or abutments. Suited for the frame profiles of EcoAs and AluFix (23 mm) and AluStar/StarTec (40 mm). A flange nut 100 or an articulated flange nut 15/120 are required in addition.
AluStar Stop end bracket Stop end bracket 40/60 29-105-50 15.40 AluStar Galvanized. Is used to form stop ends. Stop end bracket 40/60 for wall thickness up to 40 cm and profile widths of 40 and 60 mm. Stop end bracket 2.5‘ - 60/23 for wall thickness up 75 cm (2.5‘) and profile widths of 23 mm (EcoAs) and 60 mm.
AluStar Stop end bracket Stop end bracket 23/40 29-105-45 12.20 AluStar Galvanized. Is used to form stop ends. Stop end bracket 40/60 for wall thickness up to 40 cm and profile widths of 40 and 60 mm. Stop end bracket 2.5‘ - 60/23 for wall thickness up 75 cm (2.5‘) and profile widths of 23 mm (EcoAs) and 60 mm.
AluStar Plug D20 Plug D20 29-902-63 0.20 AluStar Is used to close unused tie holes (AluFix, EcoAs, AluFix, AluStar and StarTec).
AluStar Plug D20 Plug D20 without imprint 29-902-62 0.20 AluStar Is used to close unused tie holes (AluFix, EcoAs, AluFix, AluStar and StarTec).
AluStar Alignment rail AS-alignment rail 50, galv. 29-201-73 5.20 AluStar Galvanized. Is used to brace panel joints for crane ganging, bridge problem areas, brace compensation areas and build stop ends with stop end fixtures. Is attached to the formwork with flange screws.
AluStar Alignment rail AS-alignment rail 125, galv. 29-201-75 10.50 AluStar Galvanized. Is used to brace panel joints for crane ganging, bridge problem areas, brace compensation areas and build stop ends with stop end fixtures. Is attached to the formwork with flange screws.
AluStar Alignment rail AS-alignment rail 200, galv. 29-201-80 19.00 AluStar Galvanized. Is used to brace panel joints for crane ganging, bridge problem areas, brace compensation areas and build stop ends with stop end fixtures. Is attached to the formwork with flange screws.
AluStar Tie rod DW 15/90 Tie rod DW 15/90 29-900-80 1.25 AluStar Uncoated, not weldable. DIN 18216. DW thread Ø 15 mm. Is used to tie panels of double-sided formwork. Adm. load 90 kN.
AluStar Tie wrench DW15/DW20 Tie wrench DW15/DW20 29-901-39 4.50 AluStar Made of steel, galvanized. Used to screw in, screw out and hold tie rods DW15 and DW20; length 400 mm.
AluStar Tie rod holder Tie rod fixture Ø35 29-927-05 1.20 AluStar Galvanised. To hold DW tie rods with articulated flange nut, XT tie rods or XT taper ties. Can be used with horizontal or vertical MEVA wall formwork panels.
AluStar Articulated flange nut 15/120 Articulated flange nut 15/120 (SW 27) 29-900-10 1.81 AluStar Forged, galvanized. DIN 18216. DW thread Ø 15 mm, plate Ø 120 mm, max. inclination 10°, SW 27. Max. load capacity 90 kN. Reduces wear of panel coating.
AluStar Articulated flange nut 15/120 Articulated flange nut AF - ST/AS 29-900-18 2.32 AluStar Forged, galvanized. DIN 18216. DW thread Ø 15 mm, plate Ø 120 mm, max. inclination 10°, SW 27. Max. load capacity 90 kN. Reduces wear of panel coating.
AluStar Spanner SW 27 Spanner SW 27 29-800-10 1.80 AluStar Inset yellow chromated. Spanner width (SW) 27 mm. Is used to tighten and loosen flange nuts 100, articulated flange nuts 15/120 and flange screws.
AluStar Uni-tie claw Uni-tie claw 29-901-41 1.52 AluStar Galvanized. Permits tieing directly above or beside the panels. Is suited for panels with profile widths of 40 and 60 mm.
AluStar AS crane hook AS-crane hook 29-203-89 6.00 AluStar Is used to move panels. Self-locking. Load capacity: 15 kN (1.5 tons). Always 2 crane hooks required per gang. For use and safety check see the Operating Instructions.
AluStar Brace frame 250 Brace frame 250 with formwork-prop connector 29-109-20 31.50 AluStar Galvanized. Available with formwork-prop connector. Is used to align and brace the formwork. Consists of a push-pull prop R 250 (190–320 cm), a brace SRL 120 (90–150 cm) and a double-jointed footplate.The formwork-prop connectors are attached to the formwork with flange screws 18.
AluStar Formwork-prop connector Formwork-prop connector 29-804-85 1.65 AluStar Galvanized. Connects braces, brace frames and push-pull props (max. Ø 48 mm) to the multi-function profile with a flange screw 18. Delivery includes head bolt 16/90 and cotter pin 4.
AluStar Double-jointed foot plate Double-jointed foot plate (RS Ø to 57 mm) 29-402-32 4.00 AluStar Galvanized. Delivery includes head bolt 16/90 and cotter pin 4. Serves as foot plate for brace frames 250 and as connector for braces and push-pull props up to Ø 57 mm.
AluStar Walkway bracket Walkway bracket 90 (yellow), galv. 29-106-00 10.30 AluStar Galvanized, yellow, pluggable. Is used as working and safety scaffold. Is attached to the multi-function profile and secured to the multi-function profile below with a flange screw 18. The planking can be mounted to the brackets. Working width approx. 90 cm. MEVA Guard-railing post is also required. Bracket spacing depends on type of planking (DIN 4420).
AluStar Side railing Side railing 90/100, galv. 29-108-20 12.30 AluStar Galvanized. Is plugged into the walkway bracket.
AluStar Side railing Side railing 125/100, galv. 29-108-30 13.80 AluStar Galvanized. Is plugged into the walkway bracket.
AluStar Guard-railing post Guard-railing post 100 29-106-75 3.70 AluStar Galvanized. Is plugged into the walkway bracket.
AluStar Guard-railing post Guard-railing post 140 29-106-85 4.70 AluStar Galvanized. Is plugged into the walkway bracket.
AluStar Guard-railing post 48 Guard-railing post 48/120 (UK) 29-106-80 5.50 AluStar Galvanized. With manifold to be plugged into the walkway bracket and with 48 mm Ø tube to attach scaffold couplers.
AluStar Guard-railing post 48 Guard-railing post 48/134 29-920-80 5.45 AluStar Galvanized. With manifold to be plugged into the walkway bracket and with 48 mm Ø tube to attach scaffold couplers.
AluStar Tilting bracket 40/60 Tilting bracket 40/60 29-920-82 4.95 AluStar Galvanised. Used to attach MEVA guardrailing posts to create a fall protection system. It can be set up vertically to facilitate the installation of safety meshes or railing boards or inclined by 15° to create a larger working area. Secured with a wedge to the frame profile of 40 and 60 mm.
AluStar Scaffold tube Scaffold tube 48/200 29-412-23 9.40 AluStar Galvanized. Is used as hand-rail in combination with guard-railing post 48.
AluStar Scaffold tube Scaffold tube 48/300 29-412-26 14.10 AluStar Galvanized. Is used as hand-rail in combination with guard-railing post 48.
AluStar Scaffold tube Scaffold tube 48/400 29-412-27 18.80 AluStar Galvanized. Is used as hand-rail in combination with guard-railing post 48.
AluStar Scaffold tube Scaffold tube 48/500 29-412-25 23.50 AluStar Galvanized. Is used as hand-rail in combination with guard-railing post 48.
AluStar Scaffold tube Scaffold tube 48/600 29-412-28 28.20 AluStar Galvanized. Is used as hand-rail in combination with guard-railing post 48.
AluStar Swivel-joint coupler 48/48 Swivel-joint coupler 48/48 29-412-52 1.20 AluStar Galvanized. Connects 2 scaffold tubes with Ø 48.3 mm at any angle required.
AluStar Transport angle 12 Transport angle 12 29-305-20 16.50 AluStar Is used to stack and transport 5 to 12 frame formwork panels with a construction height of 12 cm and 12 cm hole distance. Max. load capacity is 10 kN per angle. For safety reasons consider 20 kN as max. capacity for the whole stack. It is recommended to use 2 foldable angles and 2 angles of the rigid type for each stack.
AluStar Transport angle 12 Transport angle 12, rigid type 29-305-25 12.70 AluStar Is used to stack and transport 5 to 12 frame formwork panels with a construction height of 12 cm and 12 cm hole distance. Max. load capacity is 10 kN per angle. For safety reasons consider 20 kN as max. capacity for the whole stack. It is recommended to use 2 foldable angles and 2 angles of the rigid type for each stack.
AluStar Safety plug AS/ST stacks, black Safety plug AS/ST stacks, black 40-131-10 19.00 AluStar Plastic, black. Secures stacked AluStar and StarTec panels.
StarTec ST panels ST-panel AL 20 21-217-01 330/270 8.91 543.00 StarTec Construction height 12 cm, frame profile width 40 mm. Three tie holes per panel height 330 cm, two tie holes per panel height 270 cm, one tie hole per panel height 135 cm and 90 cm. Absolutely compatible with AluStar panels. The frames of ST panel frames are made of closed steel profiles and are torsion-proof. ST panels are equipped with alkus facing. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles permit an easy, fast and safe attachment of accessories.
StarTec ST panels ST-panel AL 20 21-217-06 330/135 4.46 253.00 StarTec Construction height 12 cm, frame profile width 40 mm. Three tie holes per panel height 330 cm, two tie holes per panel height 270 cm, one tie hole per panel height 135 cm and 90 cm. Absolutely compatible with AluStar panels. The frames of ST panel frames are made of closed steel profiles and are torsion-proof. ST panels are equipped with alkus facing. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles permit an easy, fast and safe attachment of accessories.
StarTec ST panels ST-panel AL 17 21-217-11 330/ 90 2.97 125.50 StarTec Construction height 12 cm, frame profile width 40 mm. Three tie holes per panel height 330 cm, two tie holes per panel height 270 cm, one tie hole per panel height 135 cm and 90 cm. Absolutely compatible with AluStar panels. The frames of ST panel frames are made of closed steel profiles and are torsion-proof. ST panels are equipped with alkus facing. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles permit an easy, fast and safe attachment of accessories.
StarTec ST panels ST-panel AL 17 21-217-26 330/ 75 2.48 112.00 StarTec Construction height 12 cm, frame profile width 40 mm. Three tie holes per panel height 330 cm, two tie holes per panel height 270 cm, one tie hole per panel height 135 cm and 90 cm. Absolutely compatible with AluStar panels. The frames of ST panel frames are made of closed steel profiles and are torsion-proof. ST panels are equipped with alkus facing. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles permit an easy, fast and safe attachment of accessories.
StarTec ST panels ST-panel AL 17 21-217-46 330/ 55 1.81 93.50 StarTec Construction height 12 cm, frame profile width 40 mm. Three tie holes per panel height 330 cm, two tie holes per panel height 270 cm, one tie hole per panel height 135 cm and 90 cm. Absolutely compatible with AluStar panels. The frames of ST panel frames are made of closed steel profiles and are torsion-proof. ST panels are equipped with alkus facing. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles permit an easy, fast and safe attachment of accessories.
StarTec ST panels ST-panel AL 17 21-217-49 330/ 50 1.65 88.00 StarTec Construction height 12 cm, frame profile width 40 mm. Three tie holes per panel height 330 cm, two tie holes per panel height 270 cm, one tie hole per panel height 135 cm and 90 cm. Absolutely compatible with AluStar panels. The frames of ST panel frames are made of closed steel profiles and are torsion-proof. ST panels are equipped with alkus facing. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles permit an easy, fast and safe attachment of accessories.
StarTec ST panels ST-panel AL 17 21-217-71 330/ 30 0.99 62.00 StarTec Construction height 12 cm, frame profile width 40 mm. Three tie holes per panel height 330 cm, two tie holes per panel height 270 cm, one tie hole per panel height 135 cm and 90 cm. Absolutely compatible with AluStar panels. The frames of ST panel frames are made of closed steel profiles and are torsion-proof. ST panels are equipped with alkus facing. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles permit an easy, fast and safe attachment of accessories.
StarTec ST panels ST-panel AL 17 21-217-76 330/ 25 0.82 58.00 StarTec Construction height 12 cm, frame profile width 40 mm. Three tie holes per panel height 330 cm, two tie holes per panel height 270 cm, one tie hole per panel height 135 cm and 90 cm. Absolutely compatible with AluStar panels. The frames of ST panel frames are made of closed steel profiles and are torsion-proof. ST panels are equipped with alkus facing. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles permit an easy, fast and safe attachment of accessories.
StarTec ST panels ST-panel AL 20 21-200-03 270/240 6.48 388.00 StarTec Construction height 12 cm, frame profile width 40 mm. Three tie holes per panel height 330 cm, two tie holes per panel height 270 cm, one tie hole per panel height 135 cm and 90 cm. Absolutely compatible with AluStar panels. The frames of ST panel frames are made of closed steel profiles and are torsion-proof. ST panels are equipped with alkus facing. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles permit an easy, fast and safe attachment of accessories.
StarTec ST panels ST-panel AL 20 21-200-06 270/135 3.65 206.50 StarTec Construction height 12 cm, frame profile width 40 mm. Three tie holes per panel height 330 cm, two tie holes per panel height 270 cm, one tie hole per panel height 135 cm and 90 cm. Absolutely compatible with AluStar panels. The frames of ST panel frames are made of closed steel profiles and are torsion-proof. ST panels are equipped with alkus facing. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles permit an easy, fast and safe attachment of accessories.
StarTec ST panels ST-panel AL 17 21-200-11 270/ 90 2.43 103.40 StarTec Construction height 12 cm, frame profile width 40 mm. Three tie holes per panel height 330 cm, two tie holes per panel height 270 cm, one tie hole per panel height 135 cm and 90 cm. Absolutely compatible with AluStar panels. The frames of ST panel frames are made of closed steel profiles and are torsion-proof. ST panels are equipped with alkus facing. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles permit an easy, fast and safe attachment of accessories.
StarTec ST panels ST-panel AL 17 21-200-26 270/ 75 2.03 90.90 StarTec Construction height 12 cm, frame profile width 40 mm. Three tie holes per panel height 330 cm, two tie holes per panel height 270 cm, one tie hole per panel height 135 cm and 90 cm. Absolutely compatible with AluStar panels. The frames of ST panel frames are made of closed steel profiles and are torsion-proof. ST panels are equipped with alkus facing. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles permit an easy, fast and safe attachment of accessories.
StarTec ST panels ST-panel AL 17 21-200-46 270/ 55 1.49 72.80 StarTec Construction height 12 cm, frame profile width 40 mm. Three tie holes per panel height 330 cm, two tie holes per panel height 270 cm, one tie hole per panel height 135 cm and 90 cm. Absolutely compatible with AluStar panels. The frames of ST panel frames are made of closed steel profiles and are torsion-proof. ST panels are equipped with alkus facing. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles permit an easy, fast and safe attachment of accessories.
StarTec ST panels ST-panel AL 17 21-200-49 270/ 50 1.35 67.90 StarTec Construction height 12 cm, frame profile width 40 mm. Three tie holes per panel height 330 cm, two tie holes per panel height 270 cm, one tie hole per panel height 135 cm and 90 cm. Absolutely compatible with AluStar panels. The frames of ST panel frames are made of closed steel profiles and are torsion-proof. ST panels are equipped with alkus facing. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles permit an easy, fast and safe attachment of accessories.
StarTec ST panels ST-panel AL 17 21-200-52 270/ 49 1.32 67.10 StarTec Construction height 12 cm, frame profile width 40 mm. Three tie holes per panel height 330 cm, two tie holes per panel height 270 cm, one tie hole per panel height 135 cm and 90 cm. Absolutely compatible with AluStar panels. The frames of ST panel frames are made of closed steel profiles and are torsion-proof. ST panels are equipped with alkus facing. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles permit an easy, fast and safe attachment of accessories.
StarTec ST panels ST-panel AL 17 21-200-56 270/ 45 1.22 64.00 StarTec Construction height 12 cm, frame profile width 40 mm. Three tie holes per panel height 330 cm, two tie holes per panel height 270 cm, one tie hole per panel height 135 cm and 90 cm. Absolutely compatible with AluStar panels. The frames of ST panel frames are made of closed steel profiles and are torsion-proof. ST panels are equipped with alkus facing. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles permit an easy, fast and safe attachment of accessories.
StarTec ST panels ST-panel AL 17 21-200-61 270/ 40 1.08 60.20 StarTec Construction height 12 cm, frame profile width 40 mm. Three tie holes per panel height 330 cm, two tie holes per panel height 270 cm, one tie hole per panel height 135 cm and 90 cm. Absolutely compatible with AluStar panels. The frames of ST panel frames are made of closed steel profiles and are torsion-proof. ST panels are equipped with alkus facing. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles permit an easy, fast and safe attachment of accessories.
StarTec ST panels ST-panel AL 17 21-200-71 270/ 30 0.81 48.40 StarTec Construction height 12 cm, frame profile width 40 mm. Three tie holes per panel height 330 cm, two tie holes per panel height 270 cm, one tie hole per panel height 135 cm and 90 cm. Absolutely compatible with AluStar panels. The frames of ST panel frames are made of closed steel profiles and are torsion-proof. ST panels are equipped with alkus facing. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles permit an easy, fast and safe attachment of accessories.
StarTec ST panels ST-panel AL 17 21-200-76 270/ 25 0.68 45.70 StarTec Construction height 12 cm, frame profile width 40 mm. Three tie holes per panel height 330 cm, two tie holes per panel height 270 cm, one tie hole per panel height 135 cm and 90 cm. Absolutely compatible with AluStar panels. The frames of ST panel frames are made of closed steel profiles and are torsion-proof. ST panels are equipped with alkus facing. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles permit an easy, fast and safe attachment of accessories.
StarTec ST panels ST-panel AL 17 21-200-78 270/ 24 0.65 44.90 StarTec Construction height 12 cm, frame profile width 40 mm. Three tie holes per panel height 330 cm, two tie holes per panel height 270 cm, one tie hole per panel height 135 cm and 90 cm. Absolutely compatible with AluStar panels. The frames of ST panel frames are made of closed steel profiles and are torsion-proof. ST panels are equipped with alkus facing. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles permit an easy, fast and safe attachment of accessories.
StarTec ST panels ST-panel AL 17 21-200-81 270/ 20 0.54 41.40 StarTec Construction height 12 cm, frame profile width 40 mm. Three tie holes per panel height 330 cm, two tie holes per panel height 270 cm, one tie hole per panel height 135 cm and 90 cm. Absolutely compatible with AluStar panels. The frames of ST panel frames are made of closed steel profiles and are torsion-proof. ST panels are equipped with alkus facing. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles permit an easy, fast and safe attachment of accessories.
StarTec ST panels ST-panel AL 17 21-210-06 135/135 1.82 74.70 StarTec Construction height 12 cm, frame profile width 40 mm. Three tie holes per panel height 330 cm, two tie holes per panel height 270 cm, one tie hole per panel height 135 cm and 90 cm. Absolutely compatible with AluStar panels. The frames of ST panel frames are made of closed steel profiles and are torsion-proof. ST panels are equipped with alkus facing. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles permit an easy, fast and safe attachment of accessories.
StarTec ST panels ST-panel AL 17 21-210-11 135/ 90 1.22 53.60 StarTec Construction height 12 cm, frame profile width 40 mm. Three tie holes per panel height 330 cm, two tie holes per panel height 270 cm, one tie hole per panel height 135 cm and 90 cm. Absolutely compatible with AluStar panels. The frames of ST panel frames are made of closed steel profiles and are torsion-proof. ST panels are equipped with alkus facing. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles permit an easy, fast and safe attachment of accessories.
StarTec ST panels ST-panel AL 17 21-210-26 135/ 75 1.01 47.30 StarTec Construction height 12 cm, frame profile width 40 mm. Three tie holes per panel height 330 cm, two tie holes per panel height 270 cm, one tie hole per panel height 135 cm and 90 cm. Absolutely compatible with AluStar panels. The frames of ST panel frames are made of closed steel profiles and are torsion-proof. ST panels are equipped with alkus facing. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles permit an easy, fast and safe attachment of accessories.
StarTec ST panels ST-panel AL 17 21-210-46 135/ 55 0.74 38.60 StarTec Construction height 12 cm, frame profile width 40 mm. Three tie holes per panel height 330 cm, two tie holes per panel height 270 cm, one tie hole per panel height 135 cm and 90 cm. Absolutely compatible with AluStar panels. The frames of ST panel frames are made of closed steel profiles and are torsion-proof. ST panels are equipped with alkus facing. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles permit an easy, fast and safe attachment of accessories.
StarTec ST panels ST-panel AL 17 21-210-49 135/ 50 0.68 36.00 StarTec Construction height 12 cm, frame profile width 40 mm. Three tie holes per panel height 330 cm, two tie holes per panel height 270 cm, one tie hole per panel height 135 cm and 90 cm. Absolutely compatible with AluStar panels. The frames of ST panel frames are made of closed steel profiles and are torsion-proof. ST panels are equipped with alkus facing. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles permit an easy, fast and safe attachment of accessories.
StarTec ST panels ST-panel AL 17 21-210-52 135/ 49 0.66 35.80 StarTec Construction height 12 cm, frame profile width 40 mm. Three tie holes per panel height 330 cm, two tie holes per panel height 270 cm, one tie hole per panel height 135 cm and 90 cm. Absolutely compatible with AluStar panels. The frames of ST panel frames are made of closed steel profiles and are torsion-proof. ST panels are equipped with alkus facing. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles permit an easy, fast and safe attachment of accessories.
StarTec ST panels ST-panel AL 17 21-210-56 135/ 45 0.61 33.90 StarTec Construction height 12 cm, frame profile width 40 mm. Three tie holes per panel height 330 cm, two tie holes per panel height 270 cm, one tie hole per panel height 135 cm and 90 cm. Absolutely compatible with AluStar panels. The frames of ST panel frames are made of closed steel profiles and are torsion-proof. ST panels are equipped with alkus facing. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles permit an easy, fast and safe attachment of accessories.
StarTec ST panels ST-panel AL 17 21-210-61 135/ 40 0.54 31.00 StarTec Construction height 12 cm, frame profile width 40 mm. Three tie holes per panel height 330 cm, two tie holes per panel height 270 cm, one tie hole per panel height 135 cm and 90 cm. Absolutely compatible with AluStar panels. The frames of ST panel frames are made of closed steel profiles and are torsion-proof. ST panels are equipped with alkus facing. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles permit an easy, fast and safe attachment of accessories.
StarTec ST panels ST-panel AL 17 21-210-71 135/ 30 0.41 26.70 StarTec Construction height 12 cm, frame profile width 40 mm. Three tie holes per panel height 330 cm, two tie holes per panel height 270 cm, one tie hole per panel height 135 cm and 90 cm. Absolutely compatible with AluStar panels. The frames of ST panel frames are made of closed steel profiles and are torsion-proof. ST panels are equipped with alkus facing. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles permit an easy, fast and safe attachment of accessories.
StarTec ST panels ST-panel AL 17 21-210-76 135/ 25 0.34 25.00 StarTec Construction height 12 cm, frame profile width 40 mm. Three tie holes per panel height 330 cm, two tie holes per panel height 270 cm, one tie hole per panel height 135 cm and 90 cm. Absolutely compatible with AluStar panels. The frames of ST panel frames are made of closed steel profiles and are torsion-proof. ST panels are equipped with alkus facing. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles permit an easy, fast and safe attachment of accessories.
StarTec ST panels ST-panel AL 17 21-210-78 135/ 24 0.32 24.40 StarTec Construction height 12 cm, frame profile width 40 mm. Three tie holes per panel height 330 cm, two tie holes per panel height 270 cm, one tie hole per panel height 135 cm and 90 cm. Absolutely compatible with AluStar panels. The frames of ST panel frames are made of closed steel profiles and are torsion-proof. ST panels are equipped with alkus facing. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles permit an easy, fast and safe attachment of accessories.
StarTec ST panels ST-panel AL 17 21-210-81 135/ 20 0.27 21.10 StarTec Construction height 12 cm, frame profile width 40 mm. Three tie holes per panel height 330 cm, two tie holes per panel height 270 cm, one tie hole per panel height 135 cm and 90 cm. Absolutely compatible with AluStar panels. The frames of ST panel frames are made of closed steel profiles and are torsion-proof. ST panels are equipped with alkus facing. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles permit an easy, fast and safe attachment of accessories.
StarTec ST panels ST-panel AL 17 21-211-11 90/ 90 0.81 39.30 StarTec Construction height 12 cm, frame profile width 40 mm. Three tie holes per panel height 330 cm, two tie holes per panel height 270 cm, one tie hole per panel height 135 cm and 90 cm. Absolutely compatible with AluStar panels. The frames of ST panel frames are made of closed steel profiles and are torsion-proof. ST panels are equipped with alkus facing. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles permit an easy, fast and safe attachment of accessories.
StarTec ST panels ST-panel AL 17 21-211-26 90/ 75 0.68 34.60 StarTec Construction height 12 cm, frame profile width 40 mm. Three tie holes per panel height 330 cm, two tie holes per panel height 270 cm, one tie hole per panel height 135 cm and 90 cm. Absolutely compatible with AluStar panels. The frames of ST panel frames are made of closed steel profiles and are torsion-proof. ST panels are equipped with alkus facing. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles permit an easy, fast and safe attachment of accessories.
StarTec ST panels ST-panel AL 17 21-211-46 90/ 55 0.50 28.30 StarTec Construction height 12 cm, frame profile width 40 mm. Three tie holes per panel height 330 cm, two tie holes per panel height 270 cm, one tie hole per panel height 135 cm and 90 cm. Absolutely compatible with AluStar panels. The frames of ST panel frames are made of closed steel profiles and are torsion-proof. ST panels are equipped with alkus facing. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles permit an easy, fast and safe attachment of accessories.
StarTec ST panels ST-panel AL 17 21-211-49 90/ 50 0.45 26.00 StarTec Construction height 12 cm, frame profile width 40 mm. Three tie holes per panel height 330 cm, two tie holes per panel height 270 cm, one tie hole per panel height 135 cm and 90 cm. Absolutely compatible with AluStar panels. The frames of ST panel frames are made of closed steel profiles and are torsion-proof. ST panels are equipped with alkus facing. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles permit an easy, fast and safe attachment of accessories.
StarTec ST panels ST-panel AL 17 21-211-76 90/ 25 0.23 18.10 StarTec Construction height 12 cm, frame profile width 40 mm. Three tie holes per panel height 330 cm, two tie holes per panel height 270 cm, one tie hole per panel height 135 cm and 90 cm. Absolutely compatible with AluStar panels. The frames of ST panel frames are made of closed steel profiles and are torsion-proof. ST panels are equipped with alkus facing. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles permit an easy, fast and safe attachment of accessories.
StarTec ST panel ... /240 AL20 ST-panel AL 20 21-215-00 135/240 3.24 221.00 StarTec Suited to stack ST-panels 270/240 at top or at bottom.
StarTec ST panel ... /240 AL20 ST-panel AL 20 21-215-60 75/240 1.80 129.10 StarTec Suited to stack ST-panels 270/240 at top or at bottom.
StarTec ST panel ... /240 AL20 ST Panel AL 20 21-215-65 90/240 2.16 153.10 StarTec Suited to stack ST-panels 270/240 at top or at bottom.
StarTec ST multi-purpose panel AL 17 ST-multi-purpose panel AL 17, 270/75 21-212-26 2.03 103.50 StarTec StarTec panel with multi-adjustment profiles. Usable as column formwork or to concrete pilasters, stop ends, connections to existing walls, corner configurations, etc. Is used with stop end fixture 23/40.
StarTec ST multi-purpose panel AL 17 ST-multi-purpose panel AL 17, 135/75 21-212-46 1.01 52.20 StarTec StarTec panel with multi-adjustment profiles. Usable as column formwork or to concrete pilasters, stop ends, connections to existing walls, corner configurations, etc. Is used with stop end fixture 23/40.
StarTec StarTec XT AL StarTec XT AL 21-202-03 270/240 6.48 405.60 StarTec Steel, hot-dip galvanised with surface treatment. Frame profile height 12 cm, profile depth 4 cm. Equipped with alkus AL 20 as standard. Seven cross stiffeners (panel width 240 cm), five cross stiffeners (panel widths from 90 to 45 cm), three cross stiffeners (panel width 30 cm), of which three as multi-function profiles with welded-in DW nut. Two internal combination tie holes with rotating body for each panel height.
StarTec StarTec XT AL StarTec XT AL 21-202-11 270/ 90 2.43 116.00 StarTec Steel, hot-dip galvanised with surface treatment. Frame profile height 12 cm, profile depth 4 cm. Equipped with alkus AL 20 as standard. Seven cross stiffeners (panel width 240 cm), five cross stiffeners (panel widths from 90 to 45 cm), three cross stiffeners (panel width 30 cm), of which three as multi-function profiles with welded-in DW nut. Two internal combination tie holes with rotating body for each panel height.
StarTec StarTec XT AL StarTec XT AL 21-202-41 270/ 60 1.62 86.95 StarTec Steel, hot-dip galvanised with surface treatment. Frame profile height 12 cm, profile depth 4 cm. Equipped with alkus AL 20 as standard. Seven cross stiffeners (panel width 240 cm), five cross stiffeners (panel widths from 90 to 45 cm), three cross stiffeners (panel width 30 cm), of which three as multi-function profiles with welded-in DW nut. Two internal combination tie holes with rotating body for each panel height.
StarTec StarTec XT AL StarTec XT AL 21-202-53 270/ 49 1.32 76.25 StarTec Steel, hot-dip galvanised with surface treatment. Frame profile height 12 cm, profile depth 4 cm. Equipped with alkus AL 20 as standard. Seven cross stiffeners (panel width 240 cm), five cross stiffeners (panel widths from 90 to 45 cm), three cross stiffeners (panel width 30 cm), of which three as multi-function profiles with welded-in DW nut. Two internal combination tie holes with rotating body for each panel height.
StarTec StarTec XT AL StarTec XT AL 21-202-56 270/ 45 1.22 73.80 StarTec Steel, hot-dip galvanised with surface treatment. Frame profile height 12 cm, profile depth 4 cm. Equipped with alkus AL 20 as standard. Seven cross stiffeners (panel width 240 cm), five cross stiffeners (panel widths from 90 to 45 cm), three cross stiffeners (panel width 30 cm), of which three as multi-function profiles with welded-in DW nut. Two internal combination tie holes with rotating body for each panel height.
StarTec StarTec XT AL StarTec XT AL 21-202-71 270/ 30 0.81 60.10 StarTec Steel, hot-dip galvanised with surface treatment. Frame profile height 12 cm, profile depth 4 cm. Equipped with alkus AL 20 as standard. Seven cross stiffeners (panel width 240 cm), five cross stiffeners (panel widths from 90 to 45 cm), three cross stiffeners (panel width 30 cm), of which three as multi-function profiles with welded-in DW nut. Two internal combination tie holes with rotating body for each panel height.
StarTec Foundation tape Foundation tape 50 m 29-307-50 20.00 StarTec Galvanized. Hole spacing 50 mm; hole Ø 16 mm, 50 m. Adm. tractive force 10 kN. To be cut at hole center. Serves together with the appropriate tensioners as bottom anchoring when panels are assembled in horizontal position.
StarTec Tensioner AS/ST for foundation tape Tensioner AS/ST for foundation tape 29-307-70 1.35 StarTec Galvanized. Connects the foundation tape to AluStar or StarTec panels and serves as bottom anchoring when panels are assembled in horizontal position. Two tensioners are required per anchoring position.
StarTec Trolley for foundation tape Trolley for foundation tape 29-307-55 21.80 StarTec Not shown. Galvanized. Is used to transport and cut foundation tape to length. Suitable for one roll. Pneumatic wheels.
StarTec ST panel 270/45 with concreting window ST-panel 270/45 AL17 with concreting window 21-213-60 1.22 75.00 StarTec Is used to control the pouring process when control is not possible from above.
StarTec ST panel AL 17, 270/45 with filling nozzle ST-panel 270/45 AL17 with filling nozzle 21-213-55 1.22 73.00 StarTec Is used when concrete cannot be poured from above, e.g. tunnel formwork. Connection with a manual gate valve. Operating pressure: 20 bar.
StarTec ST panel AL 17, 270/45 with filling nozzle Manual gate valve SK 100 - 4½ 29-914-50 19.00 StarTec Is used when concrete cannot be poured from above, e.g. tunnel formwork. Connection with a manual gate valve. Operating pressure: 20 bar.
StarTec ST panel AL 17, 270/45 with filling nozzle Lever coupling SK-H DN 100 - 4½ 29-207-60 3.80 StarTec Is used when concrete cannot be poured from above, e.g. tunnel formwork. Connection with a manual gate valve. Operating pressure: 20 bar.
StarTec ST panel AL 17, 270/45 with filling nozzle Filling nozzle cleaner SK 100/800 29-207-50 7.20 StarTec Is used when concrete cannot be poured from above, e.g. tunnel formwork. Connection with a manual gate valve. Operating pressure: 20 bar.
StarTec ST panel AL 17, 270/45 with filling nozzle Sealing washer A SK 100 - 4½ 62-031-55 0.10 StarTec Is used when concrete cannot be poured from above, e.g. tunnel formwork. Connection with a manual gate valve. Operating pressure: 20 bar.
StarTec ST panel AL 17, 270/45 with filling nozzle Manual gate valve SK 125 - 5½ 29-914-45 15.60 StarTec Is used when concrete cannot be poured from above, e.g. tunnel formwork. Connection with a manual gate valve. Operating pressure: 20 bar.
StarTec ST panel AL 17, 270/45 with filling nozzle Lever coupling SK-H DN 125 - 5½ 29-207-65 5.10 StarTec Is used when concrete cannot be poured from above, e.g. tunnel formwork. Connection with a manual gate valve. Operating pressure: 20 bar.
StarTec ST panel AL 17, 270/45 with filling nozzle Filling nozzle cleaner SK 125/800 29-207-55 9.60 StarTec Is used when concrete cannot be poured from above, e.g. tunnel formwork. Connection with a manual gate valve. Operating pressure: 20 bar.
StarTec ST panel AL 17, 270/45 with filling nozzle Sealing washer A SK 125 - 5½ 62-031-56 0.20 StarTec Is used when concrete cannot be poured from above, e.g. tunnel formwork. Connection with a manual gate valve. Operating pressure: 20 bar.
StarTec AS radius panel AS-radius panel 270/15 21-500-00 0.41 38.90 StarTec Steel construction with steel sheeting. Primed and cavity-sealed. Allows the AluStar and StarTec formwork to be used as polygonal formwork.
StarTec AS radius panel AS-radius panel 270/20 21-500-10 0.54 42.70 StarTec Steel construction with steel sheeting. Primed and cavity-sealed. Allows the AluStar and StarTec formwork to be used as polygonal formwork.
StarTec AS radius panel AS-radius panel 270/25 21-500-20 0.68 50.00 StarTec Steel construction with steel sheeting. Primed and cavity-sealed. Allows the AluStar and StarTec formwork to be used as polygonal formwork.
StarTec AS radius panel AS-radius panel 135/15 21-500-40 0.20 21.10 StarTec Steel construction with steel sheeting. Primed and cavity-sealed. Allows the AluStar and StarTec formwork to be used as polygonal formwork.
StarTec AS radius panel AS-radius panel 135/20 21-500-50 0.27 23.00 StarTec Steel construction with steel sheeting. Primed and cavity-sealed. Allows the AluStar and StarTec formwork to be used as polygonal formwork.
StarTec AS radius panel AS-radius panel 135/25 21-500-60 0.34 26.40 StarTec Steel construction with steel sheeting. Primed and cavity-sealed. Allows the AluStar and StarTec formwork to be used as polygonal formwork.
StarTec AS tensioning bow AS-tensioning bow 21-500-95 5.40 StarTec Takes up the anchor load when forming polygonal constructions with radius panels.
StarTec ST inside corner ST-inside corner 330/25 AL 21-251-00 1.65 87.00 StarTec For 90° corners. Side length 25 cm. Steel frame with tie holes and alkus facing or exchangeable steel sheet.
StarTec ST inside corner ST-inside corner 270/25 AL 21-251-05 1.35 69.50 StarTec For 90° corners. Side length 25 cm. Steel frame with tie holes and alkus facing or exchangeable steel sheet.
StarTec ST inside corner ST-inside corner 135/25 AL 21-251-35 0.68 38.00 StarTec For 90° corners. Side length 25 cm. Steel frame with tie holes and alkus facing or exchangeable steel sheet.
StarTec ST inside corner ST-inside corner 90/25 AL 21-251-65 0.45 27.00 StarTec For 90° corners. Side length 25 cm. Steel frame with tie holes and alkus facing or exchangeable steel sheet.
StarTec AS/ST outside corner ST-outside corner 330 22-140-10 15.80 StarTec Aluminium. Provides together with ST panels and AS assembly locks a fast and stable outside corner assembly for 90° angles.
StarTec AS/ST outside corner AS/ST-outside corner 270 22-140-20 13.00 StarTec Aluminium. Provides together with ST panels and AS assembly locks a fast and stable outside corner assembly for 90° angles.
StarTec AS/ST outside corner AS/ST-outside corner 135 22-140-30 6.80 StarTec Aluminium. Provides together with ST panels and AS assembly locks a fast and stable outside corner assembly for 90° angles.
StarTec AS/ST outside corner AS/ST-outside corner 90 22-140-40 4.80 StarTec Aluminium. Provides together with ST panels and AS assembly locks a fast and stable outside corner assembly for 90° angles.
StarTec Outside corner Alu(minium) Outside corner Alu 270/5 22-140-25 0.27 16.10 StarTec Aluminium. Facing 5 cm wide on both sides, integrated chamfer strip. Provides together with ST panels and AS assembly locks a fast and tight outside corner assembly for 90° angles.
StarTec Outside corner Alu(minium) Outside corner Alu 135/5 22-140-35 0.14 8.40 StarTec Aluminium. Facing 5 cm wide on both sides, integrated chamfer strip. Provides together with ST panels and AS assembly locks a fast and tight outside corner assembly for 90° angles.
StarTec Outside corner Alu(minium) ST XT-outside corner Alu 270/10 22-140-50 0.54 31.05 StarTec Aluminium. Facing 5 cm wide on both sides, integrated chamfer strip. Provides together with ST panels and AS assembly locks a fast and tight outside corner assembly for 90° angles.
StarTec AS hinged inside corner ST-hinged inside corner 330/30 21-270-20 1.98 125.00 StarTec Steel construction with steel sheeting. Side length 30 cm. Adjustable angle 60°–180°.
StarTec AS hinged inside corner AS-hinged inside corner 270/30 21-270-00 1.62 73.00 StarTec Steel construction with steel sheeting. Side length 30 cm. Adjustable angle 60°–180°.
StarTec AS hinged inside corner AS-hinged inside corner 135/30 21-270-10 0.81 37.00 StarTec Steel construction with steel sheeting. Side length 30 cm. Adjustable angle 60°–180°.
StarTec AS hinged outside corner ST-hinged outside corner 330/7.5 21-280-20 0.49 62.50 StarTec Steel construction with steel sheeting. Side length 7.5 cm. Adjustable angle 60°–180°.
StarTec AS hinged outside corner AS-hinged outside corner 270/7.5 21-280-00 0.40 45.00 StarTec Steel construction with steel sheeting. Side length 7.5 cm. Adjustable angle 60°–180°.
StarTec AS hinged outside corner AS-hinged outside corner 135/7.5 21-280-10 0.20 22.00 StarTec Steel construction with steel sheeting. Side length 7.5 cm. Adjustable angle 60°–180°.
StarTec ST stripping corner ST stripping corner 330/25 21-262-05 1.65 172.00 StarTec Steel construction with steel sheeting. Side length 25 cm. With tie holes. When the bell-crank lever is pushed upwards with a crowbar, the corner is removed 17.5 mm away from the concrete and the formwork 35 mm away from the concrete on both sides.
StarTec ST stripping corner ST stripping corner 270/25 21-262-10 1.35 146.00 StarTec Steel construction with steel sheeting. Side length 25 cm. With tie holes. When the bell-crank lever is pushed upwards with a crowbar, the corner is removed 17.5 mm away from the concrete and the formwork 35 mm away from the concrete on both sides.
StarTec ST stripping corner ST stripping corner 135/25 21-262-30 0.68 82.00 StarTec Steel construction with steel sheeting. Side length 25 cm. With tie holes. When the bell-crank lever is pushed upwards with a crowbar, the corner is removed 17.5 mm away from the concrete and the formwork 35 mm away from the concrete on both sides.
StarTec Adhesive tape, red Adhesive tape 50 m, red 41-912-10 0.83 StarTec Not shown. Reinforced adhesive tape, red, 50 mm wide, 50 running metres. Total thickness: 270 mµ. Natural rubber adhesive on one side. PE-coated.
StarTec Stripping support Stripping support 29-306-30 5.00 StarTec The stripping support is used to easily activate the stripping corner from above. Use a power screwdriver, a ratchet wrench or a spanner to activate the stripping support. The tools must have SW 27 or 30 or 36.
StarTec AS assembly lock AS-assembly lock 29-205-00 2.00 StarTec Galvanized. Tightly connects and aligns AluStar and StarTec panels. Clamping length 8 cm.
StarTec Uni-assembly lock Uni-assembly lock 22 29-400-85 3.60 StarTec Galvanized. For stepless compensation. Clamping length 22 cm or 28 cm.
StarTec Uni-assembly lock Uni-assembly lock 28 29-400-90 3.90 StarTec Galvanized. For stepless compensation. Clamping length 22 cm or 28 cm.
StarTec RS-assembly lock RS-assembly lock 23-807-70 4.70 StarTec Galvanized, For stepless length compensation. Clamping length is 11.9 to 20.5 cm for stepless compensation.
StarTec Combi-lock with coupling Combi-lock with coupling 29-804-60 3.70 StarTec Galvanized. Is used to attach the push-pull props at the panel joint of the wall formwork profile widths of 40 and 60 mm. Clamping length 8, 10 and 12 cm.
StarTec Flange screw Flange screw 18 29-401-10 1.10 StarTec Galvanized. DW thread Ø 15 mm. Is used to attach accessories, e.g. alignment rails, brace frames, push-pull props, etc. Length of thread 18 cm or 27 cm.
StarTec Flange screw Flange screw 28 29-401-12 1.23 StarTec Galvanized. DW thread Ø 15 mm. Is used to attach accessories, e.g. alignment rails, brace frames, push-pull props, etc. Length of thread 18 cm or 27 cm.
StarTec ST aluminium filler ST-aluminium filler 270/5 21-270-60 0.14 7.90 StarTec Aluminium with high-quality annealed powder coating. With tie holes. For length compensation of 5 cm, especially in corners. 2 or 3 Uni-assembly locks are required for each filler.
StarTec ST aluminium filler ST-aluminium filler 135/5 21-270-65 0.07 4.20 StarTec Aluminium with high-quality annealed powder coating. With tie holes. For length compensation of 5 cm, especially in corners. 2 or 3 Uni-assembly locks are required for each filler.
StarTec ST compensation plate ST-compensation plate 330/20 21-300-15 0.66 38.23 StarTec Steel construction with steel sheeting. Is used to compensate gaps of 8 to 20 cm and attached to the panel with 2 assembly locks. Alignment rails must be used to bridge and align the panels with the compensation plate.
StarTec ST compensation plate ST-compensation plate 270/20 21-300-20 0.54 30.00 StarTec Steel construction with steel sheeting. Is used to compensate gaps of 8 to 20 cm and attached to the panel with 2 assembly locks. Alignment rails must be used to bridge and align the panels with the compensation plate.
StarTec ST compensation plate ST-compensation plate 135/20 21-300-30 0.30 15.00 StarTec Steel construction with steel sheeting. Is used to compensate gaps of 8 to 20 cm and attached to the panel with 2 assembly locks. Alignment rails must be used to bridge and align the panels with the compensation plate.
StarTec AS timber profile AS-timber profile 270/21 29-200-03 11.00 StarTec Timber profile with groove. To support job-built fillers of 14 cm or more or to connect job-built formwork with 21 mm forming face; is attached to the AS/ST-panels with 2 AS-assembly locks. Delivery and weight by pairs.
StarTec AS timber profile AS-timber profile 135/21 29-200-05 5.40 StarTec Timber profile with groove. To support job-built fillers of 14 cm or more or to connect job-built formwork with 21 mm forming face; is attached to the AS/ST-panels with 2 AS-assembly locks. Delivery and weight by pairs.
StarTec Stop end fixture 23/40 yellow Stop end fixture 23/40 (yellow) 29-402-85 3.00 StarTec Yellow chromated. To attach alignment rails to the panels when stop ends are formed; or it is used in connection with multi-purpose panels (EcoAs, StarTec) to form outer corners or abutments. It is suited for the frame profiles of EcoAs and AluFix (23 mm) and AluStar/StarTec (40 mm). A flange nut 100 or an articulated flange nut 15/120 are required in addition.
StarTec Stop end bracket Stop end bracket 40/60 29-105-50 15.40 StarTec Galvanized. Is used to form stop ends. Stop end bracket 40/60 for wall thickness up to 40 cm and profile widths of 40 and 60 mm. Stop end bracket 2.5‘ - 60/23 for wall thickness up 75 cm (2.5‘) and profile widths of 23 mm (EcoAs) and 60 mm.
StarTec Stop end bracket Stop end bracket 23/40 29-105-45 12.20 StarTec Galvanized. Is used to form stop ends. Stop end bracket 40/60 for wall thickness up to 40 cm and profile widths of 40 and 60 mm. Stop end bracket 2.5‘ - 60/23 for wall thickness up 75 cm (2.5‘) and profile widths of 23 mm (EcoAs) and 60 mm.
StarTec Plug D20 Plug D20 29-902-63 0.20 StarTec Is used to close unused tie holes (AluFix, EcoAs, AluFix, AluStar and StarTec).
StarTec Plug D20 Plug D20 without imprint 29-902-62 0.20 StarTec Is used to close unused tie holes (AluFix, EcoAs, AluFix, AluStar and StarTec).
StarTec M outside corner bracket M-outside corner bracket, galv. 23-137-63 12.00 StarTec Galvanized. Provides together with AS/ST panels and flange screw 18 it provides a tight outside corner assembly. Primarily used for concreting heights over 405 cm.
StarTec Corner angle 40/60 Corner angle 40/60 29-402-25 9.50 StarTec Galvanized. Side lengths 40 and 60 cm. For inside and outside corners.
StarTec Alignment rail AS-alignment rail 50, galv. 29-201-73 5.20 StarTec Galvanized. Is used to brace panel joints for crane ganging, bridge problem areas, brace compensation areas and build stop ends with stop end fixtures. Is attached to the formwork with flange screws.
StarTec Alignment rail AS-alignment rail 125, galv. 29-201-75 10.50 StarTec Galvanized. Is used to brace panel joints for crane ganging, bridge problem areas, brace compensation areas and build stop ends with stop end fixtures. Is attached to the formwork with flange screws.
StarTec Alignment rail M-alignment rail 180, galv. 29-400-92 24.80 StarTec Galvanized. Is used to brace panel joints for crane ganging, bridge problem areas, brace compensation areas and build stop ends with stop end fixtures. Is attached to the formwork with flange screws.
StarTec Alignment rail M-alignment rail 250, galv. 29-402-50 34.50 StarTec Galvanized. Is used to brace panel joints for crane ganging, bridge problem areas, brace compensation areas and build stop ends with stop end fixtures. Is attached to the formwork with flange screws.
StarTec Alignment rail M-alignment rail 350, reinforced 29-402-45 124.00 StarTec Galvanized. Is used to brace panel joints for crane ganging, bridge problem areas, brace compensation areas and build stop ends with stop end fixtures. Is attached to the formwork with flange screws.
StarTec Alignment rail M-alignment rail 450 29-402-40 84.00 StarTec Galvanized. Is used to brace panel joints for crane ganging, bridge problem areas, brace compensation areas and build stop ends with stop end fixtures. Is attached to the formwork with flange screws.
StarTec Alignment rail M-alignment rail 450, reinforced 29-402-38 159.00 StarTec Galvanized. Is used to brace panel joints for crane ganging, bridge problem areas, brace compensation areas and build stop ends with stop end fixtures. Is attached to the formwork with flange screws.
StarTec Tie rod DW 15/90 Tie rod DW 15/90 29-900-80 1.25 StarTec Uncoated, not weldable. DW thread Ø 15 mm; adm. load capacity 90 kN (DIN 18216); is used to tie panels of a double-sided formwork.
StarTec Tie wrench DW15/DW20 Tie wrench DW15/DW20 29-901-39 4.50 StarTec Made of steel, galvanized. Used to screw in, screw out and hold tie rods DW15 and DW20; length 400 mm.
StarTec Tie rod holder Tie rod fixture Ø35 29-927-05 1.20 StarTec Galvanised. To hold DW tie rods with articulated flange nut, XT tie rods or XT taper ties. Can be used with horizontal or vertical MEVA wall formwork panels.
StarTec Flange nut 100 Flange nut 100 (SW 27, forged) 29-900-20 0.70 StarTec Forged, galvanized. DIN 18216. DW thread Ø 15 mm, plate Ø 100 mm, SW 27. Admissible load 90 kN.
StarTec Articulated flange nut 15/120 Articulated flange nut 15/120 (SW 27) 29-900-10 1.81 StarTec Forged, galvanized. DIN 18216. DW thread Ø 15 mm, plate Ø 120 mm, max. inclination 10°, SW 27. Max. load capacity 90 kN. Reduces wear of panel coating.
StarTec Spanner SW 27 Spanner SW 27 29-800-10 1.80 StarTec Inset yellow chromated. Spanner width (SW) 27 mm. Is used to tighten and loosen flange nuts 100, articulated flange nuts 15/120 and flange screws.
StarTec Uni-tie claw Uni-tie claw 29-901-41 1.52 StarTec Galvanized. Permits tieing directly above or beside the panels. Is suited for panels with profile widths of 40 and 60 mm.
StarTec AS crane hook AS-crane hook 29-203-89 6.00 StarTec Is used to move panels. Self-locking. Load capacity: 15 kN (1.5 tons). Always 2 crane hooks required per gang. For use and safety check see the Operating Instructions.
StarTec Brace frame 250 Brace frame 250 with formwork-prop connector 29-109-20 31.50 StarTec Galvanized. Available with formwork-prop connector. Is used to align and brace the formwork. Consists of a push-pull prop R 250 (190–320 cm), a brace SRL 120 (90–150 cm) and a double-jointed footplate.The formwork-prop connectors are attached to the formwork with flange screws 18.
StarTec Formwork-prop connector Formwork-prop connector 29-804-85 1.65 StarTec Galvanized. Connects braces, brace frames and push-pull props (max. Ø 48 mm) to the multi-function profile with a flange screw 18. Delivery includes head bolt 16/90 and cotter pin 4.
StarTec Double-jointed foot plate Double-jointed foot plate (RS Ø to 57 mm) 29-402-32 4.00 StarTec Galvanized. Delivery includes head bolt 16/90 and cotter pin 4. Serves as foot plate for brace frames 250 and as connector for braces and push-pull props up to Ø 57 mm.
StarTec Walkway bracket Walkway bracket 90 (yellow), galv. 29-106-00 10.30 StarTec Galvanized, yellow, pluggable. Is used as working and safety scaffold. Is attached to the multi-function profile and secured to the multi-function profile below with a flange screw 18. The planking can be mounted to the brackets. Working width approx. 90 cm. MEVA Guard-railing post is also required. Bracket spacing depends on type of planking (DIN 4420).
StarTec Side railing Side railing 90/100, galv. 29-108-20 12.30 StarTec Galvanized. Is plugged into the walkway bracket.
StarTec Side railing Side railing 125/100, galv. 29-108-30 13.80 StarTec Galvanized. Is plugged into the walkway bracket.
StarTec Guard-railing post Guard-railing post 100 29-106-75 3.70 StarTec Galvanized. Is plugged into the walkway bracket.
StarTec Guard-railing post Guard-railing post 140 29-106-85 4.70 StarTec Galvanized. Is plugged into the walkway bracket.
StarTec Guard-railing post 48 Guard-railing post 48/120 (UK) 29-106-80 5.50 StarTec Galvanized. With manifold to attach it to the walkway bracket, designed with tube Ø 48 mm to attach tube couplers.
StarTec Guard-railing post 48 Guard-railing post 48/134 29-920-80 5.45 StarTec Galvanized. With manifold to attach it to the walkway bracket, designed with tube Ø 48 mm to attach tube couplers.
StarTec Tilting bracket 40/60 Tilting bracket 40/60 29-920-82 4.95 StarTec Galvanised. Used to attach MEVA guardrailing posts to create a fall protection system. It can be set up vertically to facilitate the installation of safety meshes or railing boards or inclined by 15° to create a larger working area. Secured with a wedge to the frame profile of 40 and 60 mm.
StarTec Scaffold tube Scaffold tube 48/400 29-412-27 18.80 StarTec Galvanized . Is used as hand-rail / mid-rail in combination with guard-railing post 48.
StarTec Scaffold tube Scaffold tube 48/500 29-412-25 23.50 StarTec Galvanized . Is used as hand-rail / mid-rail in combination with guard-railing post 48.
StarTec Scaffold tube Scaffold tube 48/600 29-412-28 28.20 StarTec Galvanized . Is used as hand-rail / mid-rail in combination with guard-railing post 48.
StarTec Swivel-joint coupler 48/48 Swivel-joint coupler 48/48 29-412-52 1.20 StarTec Galvanized. Connects 2 scaffold tubes with Ø 48.3 mm at any angle required.
StarTec Transport angle 12 Transport angle 12 29-305-20 16.50 StarTec Is used to stack and transport 5 to 12 frame formwork panels with a construction height of 12 cm and 12 cm hole distance. Max. load capacity is 10 kN per angle. For safety reasons consider 20 kN as maximum capacity for the whole stack. We recommend using 2 foldable angles and 2 angles of the rigid type for each stack.
StarTec Transport angle 12 Transport angle 12, rigid type 29-305-25 12.70 StarTec Is used to stack and transport 5 to 12 frame formwork panels with a construction height of 12 cm and 12 cm hole distance. Max. load capacity is 10 kN per angle. For safety reasons consider 20 kN as maximum capacity for the whole stack. We recommend using 2 foldable angles and 2 angles of the rigid type for each stack.
StarTec Safety plug AS/ST stacks Safety plug AS/ST stacks, black 40-131-10 19.00 StarTec Secures stacked AluStar and StarTec panels. Black bolt for AluStar, grey one for StarTec 270/240.
StarTec Safety plug AS/ST stacks Safety plug ST 270/240 stacks, grey 40-131-15 19.00 StarTec Secures stacked AluStar and StarTec panels. Black bolt for AluStar, grey one for StarTec 270/240.
StarTec Crane slings 40 Crane slings 40 29-401-44 21.00 StarTec Four polyester ropes, 5 m long. With 60 cm lifting chain and 4 lifting hooks. Max. load capacity 20 kN (2 tons). Are used to load and unload trucks and move panel stacks near the ground.
StarTec Lifting hook 40 Lifting hook 40 29-401-42 1.60 StarTec Galvanized. Allows any 4-rope crane slings available on site to be used to move the panel stacks. Always use 4 hooks at a time. Max. load capacity 10 kN (1 ton) per lifting hook. Max. weight of a panel stack 2 tons. Refer to the lifting hook Operating Instructions for application and safety test.
MXT Mammut XT panels Mammut XT panel AL 23-001-05 350/250 8.75 585.00 MXT Galvanized and post-treated. Frame profile height 12 cm, frame profile depth 60 mm. The frames of the Mammut XT panels consist of closed, torsionally rigid steel profiles. All-around grooves guarantee a stepless, tight and perfectly aligned panel connection using M assembly locks. The permanently installed, internal and recessed XT tie holes with rotating body enable both single-sided as well as conventional, two-sided tying. All cross stiffeners are equipped with DW threaded nuts and serve as multi-function profiles, allowing easy, fast and safe attachment of accessories. The Mammut XT panels are equipped with alkus facing.
MXT Mammut XT panels Mammut XT panel AL 23-001-20 350/125 4.38 319.50 MXT Galvanized and post-treated. Frame profile height 12 cm, frame profile depth 60 mm. The frames of the Mammut XT panels consist of closed, torsionally rigid steel profiles. All-around grooves guarantee a stepless, tight and perfectly aligned panel connection using M assembly locks. The permanently installed, internal and recessed XT tie holes with rotating body enable both single-sided as well as conventional, two-sided tying. All cross stiffeners are equipped with DW threaded nuts and serve as multi-function profiles, allowing easy, fast and safe attachment of accessories. The Mammut XT panels are equipped with alkus facing.
MXT Mammut XT panels Mammut XT panel AL 23-001-30 350/100 3.50 281.00 MXT Galvanized and post-treated. Frame profile height 12 cm, frame profile depth 60 mm. The frames of the Mammut XT panels consist of closed, torsionally rigid steel profiles. All-around grooves guarantee a stepless, tight and perfectly aligned panel connection using M assembly locks. The permanently installed, internal and recessed XT tie holes with rotating body enable both single-sided as well as conventional, two-sided tying. All cross stiffeners are equipped with DW threaded nuts and serve as multi-function profiles, allowing easy, fast and safe attachment of accessories. The Mammut XT panels are equipped with alkus facing.
MXT Mammut XT panels Mammut XT panel AL 23-001-35 350/ 75 2.63 188.10 MXT Galvanized and post-treated. Frame profile height 12 cm, frame profile depth 60 mm. The frames of the Mammut XT panels consist of closed, torsionally rigid steel profiles. All-around grooves guarantee a stepless, tight and perfectly aligned panel connection using M assembly locks. The permanently installed, internal and recessed XT tie holes with rotating body enable both single-sided as well as conventional, two-sided tying. All cross stiffeners are equipped with DW threaded nuts and serve as multi-function profiles, allowing easy, fast and safe attachment of accessories. The Mammut XT panels are equipped with alkus facing.
MXT Mammut XT panels Mammut XT panel AL 23-001-50 350/ 50 1.75 151.00 MXT Galvanized and post-treated. Frame profile height 12 cm, frame profile depth 60 mm. The frames of the Mammut XT panels consist of closed, torsionally rigid steel profiles. All-around grooves guarantee a stepless, tight and perfectly aligned panel connection using M assembly locks. The permanently installed, internal and recessed XT tie holes with rotating body enable both single-sided as well as conventional, two-sided tying. All cross stiffeners are equipped with DW threaded nuts and serve as multi-function profiles, allowing easy, fast and safe attachment of accessories. The Mammut XT panels are equipped with alkus facing.
MXT Mammut XT panels Mammut XT panel AL 23-001-75 350/ 25 0.88 105.00 MXT Galvanized and post-treated. Frame profile height 12 cm, frame profile depth 60 mm. The frames of the Mammut XT panels consist of closed, torsionally rigid steel profiles. All-around grooves guarantee a stepless, tight and perfectly aligned panel connection using M assembly locks. The permanently installed, internal and recessed XT tie holes with rotating body enable both single-sided as well as conventional, two-sided tying. All cross stiffeners are equipped with DW threaded nuts and serve as multi-function profiles, allowing easy, fast and safe attachment of accessories. The Mammut XT panels are equipped with alkus facing.
MXT Mammut XT panels Mammut XT panel AL 23-002-05 300/250 7.50 497.00 MXT Galvanized and post-treated. Frame profile height 12 cm, frame profile depth 60 mm. The frames of the Mammut XT panels consist of closed, torsionally rigid steel profiles. All-around grooves guarantee a stepless, tight and perfectly aligned panel connection using M assembly locks. The permanently installed, internal and recessed XT tie holes with rotating body enable both single-sided as well as conventional, two-sided tying. All cross stiffeners are equipped with DW threaded nuts and serve as multi-function profiles, allowing easy, fast and safe attachment of accessories. The Mammut XT panels are equipped with alkus facing.
MXT Mammut XT panels Mammut XT panel AL 23-002-20 300/125 3.75 271.00 MXT Galvanized and post-treated. Frame profile height 12 cm, frame profile depth 60 mm. The frames of the Mammut XT panels consist of closed, torsionally rigid steel profiles. All-around grooves guarantee a stepless, tight and perfectly aligned panel connection using M assembly locks. The permanently installed, internal and recessed XT tie holes with rotating body enable both single-sided as well as conventional, two-sided tying. All cross stiffeners are equipped with DW threaded nuts and serve as multi-function profiles, allowing easy, fast and safe attachment of accessories. The Mammut XT panels are equipped with alkus facing.
MXT Mammut XT panels Mammut XT panel AL 23-002-30 300/100 3.00 239.00 MXT Galvanized and post-treated. Frame profile height 12 cm, frame profile depth 60 mm. The frames of the Mammut XT panels consist of closed, torsionally rigid steel profiles. All-around grooves guarantee a stepless, tight and perfectly aligned panel connection using M assembly locks. The permanently installed, internal and recessed XT tie holes with rotating body enable both single-sided as well as conventional, two-sided tying. All cross stiffeners are equipped with DW threaded nuts and serve as multi-function profiles, allowing easy, fast and safe attachment of accessories. The Mammut XT panels are equipped with alkus facing.
MXT Mammut XT panels Mammut XT panel AL 23-002-35 300/ 75 2.25 162.00 MXT Galvanized and post-treated. Frame profile height 12 cm, frame profile depth 60 mm. The frames of the Mammut XT panels consist of closed, torsionally rigid steel profiles. All-around grooves guarantee a stepless, tight and perfectly aligned panel connection using M assembly locks. The permanently installed, internal and recessed XT tie holes with rotating body enable both single-sided as well as conventional, two-sided tying. All cross stiffeners are equipped with DW threaded nuts and serve as multi-function profiles, allowing easy, fast and safe attachment of accessories. The Mammut XT panels are equipped with alkus facing.
MXT Mammut XT panels Mammut XT panel AL 23-002-50 300/ 50 1.50 131.00 MXT Galvanized and post-treated. Frame profile height 12 cm, frame profile depth 60 mm. The frames of the Mammut XT panels consist of closed, torsionally rigid steel profiles. All-around grooves guarantee a stepless, tight and perfectly aligned panel connection using M assembly locks. The permanently installed, internal and recessed XT tie holes with rotating body enable both single-sided as well as conventional, two-sided tying. All cross stiffeners are equipped with DW threaded nuts and serve as multi-function profiles, allowing easy, fast and safe attachment of accessories. The Mammut XT panels are equipped with alkus facing.
MXT Mammut XT panels Mammut XT panel AL 23-002-75 300/ 25 0.75 91.30 MXT Galvanized and post-treated. Frame profile height 12 cm, frame profile depth 60 mm. The frames of the Mammut XT panels consist of closed, torsionally rigid steel profiles. All-around grooves guarantee a stepless, tight and perfectly aligned panel connection using M assembly locks. The permanently installed, internal and recessed XT tie holes with rotating body enable both single-sided as well as conventional, two-sided tying. All cross stiffeners are equipped with DW threaded nuts and serve as multi-function profiles, allowing easy, fast and safe attachment of accessories. The Mammut XT panels are equipped with alkus facing.
MXT Mammut XT panels Mammut XT panel AL 23-003-20 250/125 3.13 230.00 MXT Galvanized and post-treated. Frame profile height 12 cm, frame profile depth 60 mm. The frames of the Mammut XT panels consist of closed, torsionally rigid steel profiles. All-around grooves guarantee a stepless, tight and perfectly aligned panel connection using M assembly locks. The permanently installed, internal and recessed XT tie holes with rotating body enable both single-sided as well as conventional, two-sided tying. All cross stiffeners are equipped with DW threaded nuts and serve as multi-function profiles, allowing easy, fast and safe attachment of accessories. The Mammut XT panels are equipped with alkus facing.
MXT Mammut XT panels Mammut XT panel AL 23-003-30 250/100 2.50 201.50 MXT Galvanized and post-treated. Frame profile height 12 cm, frame profile depth 60 mm. The frames of the Mammut XT panels consist of closed, torsionally rigid steel profiles. All-around grooves guarantee a stepless, tight and perfectly aligned panel connection using M assembly locks. The permanently installed, internal and recessed XT tie holes with rotating body enable both single-sided as well as conventional, two-sided tying. All cross stiffeners are equipped with DW threaded nuts and serve as multi-function profiles, allowing easy, fast and safe attachment of accessories. The Mammut XT panels are equipped with alkus facing.
MXT Mammut XT panels Mammut XT panel AL 23-003-35 250/ 75 1.88 135.50 MXT Galvanized and post-treated. Frame profile height 12 cm, frame profile depth 60 mm. The frames of the Mammut XT panels consist of closed, torsionally rigid steel profiles. All-around grooves guarantee a stepless, tight and perfectly aligned panel connection using M assembly locks. The permanently installed, internal and recessed XT tie holes with rotating body enable both single-sided as well as conventional, two-sided tying. All cross stiffeners are equipped with DW threaded nuts and serve as multi-function profiles, allowing easy, fast and safe attachment of accessories. The Mammut XT panels are equipped with alkus facing.
MXT Mammut XT panels Mammut XT panel AL 23-003-50 250/ 50 1.25 107.40 MXT Galvanized and post-treated. Frame profile height 12 cm, frame profile depth 60 mm. The frames of the Mammut XT panels consist of closed, torsionally rigid steel profiles. All-around grooves guarantee a stepless, tight and perfectly aligned panel connection using M assembly locks. The permanently installed, internal and recessed XT tie holes with rotating body enable both single-sided as well as conventional, two-sided tying. All cross stiffeners are equipped with DW threaded nuts and serve as multi-function profiles, allowing easy, fast and safe attachment of accessories. The Mammut XT panels are equipped with alkus facing.
MXT Mammut XT panels Mammut XT panel AL 23-003-75 250/ 25 0.63 74.50 MXT Galvanized and post-treated. Frame profile height 12 cm, frame profile depth 60 mm. The frames of the Mammut XT panels consist of closed, torsionally rigid steel profiles. All-around grooves guarantee a stepless, tight and perfectly aligned panel connection using M assembly locks. The permanently installed, internal and recessed XT tie holes with rotating body enable both single-sided as well as conventional, two-sided tying. All cross stiffeners are equipped with DW threaded nuts and serve as multi-function profiles, allowing easy, fast and safe attachment of accessories. The Mammut XT panels are equipped with alkus facing.
MXT Mammut XT panels Mammut XT panel AL 23-004-20 125/125 1.56 119.60 MXT Galvanized and post-treated. Frame profile height 12 cm, frame profile depth 60 mm. The frames of the Mammut XT panels consist of closed, torsionally rigid steel profiles. All-around grooves guarantee a stepless, tight and perfectly aligned panel connection using M assembly locks. The permanently installed, internal and recessed XT tie holes with rotating body enable both single-sided as well as conventional, two-sided tying. All cross stiffeners are equipped with DW threaded nuts and serve as multi-function profiles, allowing easy, fast and safe attachment of accessories. The Mammut XT panels are equipped with alkus facing.
MXT Mammut XT panels Mammut XT panel AL 23-004-30 125/100 1.25 103.50 MXT Galvanized and post-treated. Frame profile height 12 cm, frame profile depth 60 mm. The frames of the Mammut XT panels consist of closed, torsionally rigid steel profiles. All-around grooves guarantee a stepless, tight and perfectly aligned panel connection using M assembly locks. The permanently installed, internal and recessed XT tie holes with rotating body enable both single-sided as well as conventional, two-sided tying. All cross stiffeners are equipped with DW threaded nuts and serve as multi-function profiles, allowing easy, fast and safe attachment of accessories. The Mammut XT panels are equipped with alkus facing.
MXT Mammut XT panels Mammut XT panel AL 23-004-35 125/ 75 0.94 73.50 MXT Galvanized and post-treated. Frame profile height 12 cm, frame profile depth 60 mm. The frames of the Mammut XT panels consist of closed, torsionally rigid steel profiles. All-around grooves guarantee a stepless, tight and perfectly aligned panel connection using M assembly locks. The permanently installed, internal and recessed XT tie holes with rotating body enable both single-sided as well as conventional, two-sided tying. All cross stiffeners are equipped with DW threaded nuts and serve as multi-function profiles, allowing easy, fast and safe attachment of accessories. The Mammut XT panels are equipped with alkus facing.
MXT Mammut XT panels Mammut XT panel AL 23-004-50 125/ 50 0.63 58.50 MXT Galvanized and post-treated. Frame profile height 12 cm, frame profile depth 60 mm. The frames of the Mammut XT panels consist of closed, torsionally rigid steel profiles. All-around grooves guarantee a stepless, tight and perfectly aligned panel connection using M assembly locks. The permanently installed, internal and recessed XT tie holes with rotating body enable both single-sided as well as conventional, two-sided tying. All cross stiffeners are equipped with DW threaded nuts and serve as multi-function profiles, allowing easy, fast and safe attachment of accessories. The Mammut XT panels are equipped with alkus facing.
MXT Mammut XT panels Mammut XT panel AL 23-004-75 125/ 25 0.31 36.80 MXT Galvanized and post-treated. Frame profile height 12 cm, frame profile depth 60 mm. The frames of the Mammut XT panels consist of closed, torsionally rigid steel profiles. All-around grooves guarantee a stepless, tight and perfectly aligned panel connection using M assembly locks. The permanently installed, internal and recessed XT tie holes with rotating body enable both single-sided as well as conventional, two-sided tying. All cross stiffeners are equipped with DW threaded nuts and serve as multi-function profiles, allowing easy, fast and safe attachment of accessories. The Mammut XT panels are equipped with alkus facing.
MXT Foundation tape Foundation tape 50 m 29-307-50 20.00 MXT Galvanized, hole spacing 50 mm, hole Ø 16 mm, length 50 m, to be cut at hole centre, permissible tensile force 10 kN. Serves together with the appropriate tensioner as the lower anchor of horizontal panels.
MXT Tensioner M for foundation tape Tensioner M for foundation tape 29-307-60 1.50 MXT Galvanized. Used to connect the foundation tape to the Mammut panels. Two tensioners required per anchoring position.
MXT Trolley for foundation tape Trolley for foundation tape 29-307-55 21.80 MXT Not shown. Galvanized. Used to transport and to cut foundation tape to length. Suitable for one roll. With pneumatic tyres.
MXT M filler M 350-aluminium filler 350/5 29-300-30 0.18 10.30 MXT Aluminium, with cured powder coating and tie holes. For length compensation of 5 cm, particularly in corners. Two or three Uni-assembly locks are required for each filler.
MXT M filler XT aluminium filler 300/5 29-300-45 0.15 8.70 MXT Aluminium, with cured powder coating and tie holes. For length compensation of 5 cm, particularly in corners. Two or three Uni-assembly locks are required for each filler.
MXT M filler M 350-aluminium filler 250/5 29-300-35 0.13 7.40 MXT Aluminium, with cured powder coating and tie holes. For length compensation of 5 cm, particularly in corners. Two or three Uni-assembly locks are required for each filler.
MXT M filler M 350-aluminium filler 125/5 29-300-40 0.06 3.90 MXT Aluminium, with cured powder coating and tie holes. For length compensation of 5 cm, particularly in corners. Two or three Uni-assembly locks are required for each filler.
MXT M Timber profile M 350-timber profile 350/21 29-400-02 0.74 20.20 MXT Timber profile with groove. Used to support job-built length compensations of 17 cm or more or to connect job-built formwork with a 21 mm shuttering panels. Attached to Mammut XT panels with two or three assembly locks. Delivery in and weight for pairs.
MXT M Timber profile M timber profile 300/21 29-400-05 0.63 17.40 MXT Timber profile with groove. Used to support job-built length compensations of 17 cm or more or to connect job-built formwork with a 21 mm shuttering panels. Attached to Mammut XT panels with two or three assembly locks. Delivery in and weight for pairs.
MXT M Timber profile M timber profile 250/21 29-400-15 0.53 14.60 MXT Timber profile with groove. Used to support job-built length compensations of 17 cm or more or to connect job-built formwork with a 21 mm shuttering panels. Attached to Mammut XT panels with two or three assembly locks. Delivery in and weight for pairs.
MXT M Timber profile M timber profile 125/21 29-400-17 0.26 7.20 MXT Timber profile with groove. Used to support job-built length compensations of 17 cm or more or to connect job-built formwork with a 21 mm shuttering panels. Attached to Mammut XT panels with two or three assembly locks. Delivery in and weight for pairs.
MXT XT compensation panel XT compensation panel 350 23-153-00 150.20 MXT Galvanized. Used to create length compensations between 20 and 50 cm. With integrated plastic nailing strip to attach the facing (20 mm). Delivery in and weight for pairs.
MXT XT compensation panel XT compensation panel 300 23-153-05 130.00 MXT Galvanized. Used to create length compensations between 20 and 50 cm. With integrated plastic nailing strip to attach the facing (20 mm). Delivery in and weight for pairs.
MXT XT compensation panel XT compensation panel 250 23-153-10 107.60 MXT Galvanized. Used to create length compensations between 20 and 50 cm. With integrated plastic nailing strip to attach the facing (20 mm). Delivery in and weight for pairs.
MXT XT compensation panel XT compensation panel 125 23-153-15 55.20 MXT Galvanized. Used to create length compensations between 20 and 50 cm. With integrated plastic nailing strip to attach the facing (20 mm). Delivery in and weight for pairs.
MXT Mammut XT inside corner 350 Mammut XT Inside corner 350/35 23-152-00 2.45 149.10 MXT Galvanized. For 90° corners, side lengths 35 and 40 cm. Steel frame with conical anchor sleeves for tying, equipped with with struts for crane movement and alkus facing. Cross stiffeners equipped with welded-in DW-threaded nuts.
MXT Mammut XT inside corner 350 Mammut XT Inside corner 350/40 23-152-20 2.80 163.50 MXT Galvanized. For 90° corners, side lengths 35 and 40 cm. Steel frame with conical anchor sleeves for tying, equipped with with struts for crane movement and alkus facing. Cross stiffeners equipped with welded-in DW-threaded nuts.
MXT Mammut XT inside corner 300 Mammut XT Inside corner 300/35 23-152-05 2.10 126.50 MXT Galvanized. For 90° corners, side lengths 35 and 40 cm. Steel frame with conical anchor sleeves for tying, equipped with with struts for crane movement and alkus facing. Cross stiffeners equipped with welded-in DW-threaded nuts.
MXT Mammut XT inside corner 300 Mammut XT Inside corner 300/40 23-152-25 2.40 138.50 MXT Galvanized. For 90° corners, side lengths 35 and 40 cm. Steel frame with conical anchor sleeves for tying, equipped with with struts for crane movement and alkus facing. Cross stiffeners equipped with welded-in DW-threaded nuts.
MXT Mammut XT inside corner 250 Mammut XT Inside corner 250/35 23-152-10 1.75 108.60 MXT Galvanized. For 90° corners, side lengths 35 and 40 cm. Steel frame with conical anchor sleeves for tying, equipped with with struts for crane movement and alkus facing. Cross stiffeners equipped with welded-in DW-threaded nuts.
MXT Mammut XT inside corner 250 Mammut XT Inside corner 250/40 23-152-30 2.00 119.00 MXT Galvanized. For 90° corners, side lengths 35 and 40 cm. Steel frame with conical anchor sleeves for tying, equipped with with struts for crane movement and alkus facing. Cross stiffeners equipped with welded-in DW-threaded nuts.
MXT Mammut XT inside corner 125 Mammut XT Inside corner 125/35 23-152-15 0.88 56.30 MXT Galvanized. For 90° corners, side lengths 35 and 40 cm. Steel frame with conical anchor sleeves for tying, equipped with with struts for crane movement and alkus facing. Cross stiffeners equipped with welded-in DW-threaded nuts.
MXT Mammut XT inside corner 125 Mammut XT Inside corner 125/40 23-152-35 1.00 62.20 MXT Galvanized. For 90° corners, side lengths 35 and 40 cm. Steel frame with conical anchor sleeves for tying, equipped with with struts for crane movement and alkus facing. Cross stiffeners equipped with welded-in DW-threaded nuts.
MXT M outside corner 350 M 350 Outside corner 350 23-140-30 78.00 MXT Galvanized. For 90° corners. Side lengths 0, 10 and 15 cm. Steel frame with alkus facing. Cross stiffeners with welded-in DW-threaded nuts; corners with side lengths 10 and 15 cm equipped with with struts for crane movement.
MXT M outside corner 350 Mammut XT Outside corner 350/10 23-152-50 0.70 101.30 MXT Galvanized. For 90° corners. Side lengths 0, 10 and 15 cm. Steel frame with alkus facing. Cross stiffeners with welded-in DW-threaded nuts; corners with side lengths 10 and 15 cm equipped with with struts for crane movement.
MXT M outside corner 350 Mammut XT Outside corner 350/15 23-152-70 1.05 120.70 MXT Galvanized. For 90° corners. Side lengths 0, 10 and 15 cm. Steel frame with alkus facing. Cross stiffeners with welded-in DW-threaded nuts; corners with side lengths 10 and 15 cm equipped with with struts for crane movement.
MXT M outside corner 300 M-outside corner 300 23-140-00 66.60 MXT Galvanized. For 90° corners. Side lengths 0, 10 and 15 cm. Steel frame with alkus facing. Cross stiffeners with welded-in DW-threaded nuts; corners with side lengths 10 and 15 cm equipped with with struts for crane movement.
MXT M outside corner 300 Mammut XT Outside corner 300/10 23-152-55 0.60 86.60 MXT Galvanized. For 90° corners. Side lengths 0, 10 and 15 cm. Steel frame with alkus facing. Cross stiffeners with welded-in DW-threaded nuts; corners with side lengths 10 and 15 cm equipped with with struts for crane movement.
MXT M outside corner 300 Mammut XT Outside corner 300/15 23-152-75 0.90 103.00 MXT Galvanized. For 90° corners. Side lengths 0, 10 and 15 cm. Steel frame with alkus facing. Cross stiffeners with welded-in DW-threaded nuts; corners with side lengths 10 and 15 cm equipped with with struts for crane movement.
MXT M outside corner 250 M-outside corner 250 23-140-10 55.20 MXT Galvanized. For 90° corners. Side lengths 0, 10 and 15 cm. Steel frame with alkus facing. Cross stiffeners with welded-in DW-threaded nuts; corners with side lengths 10 and 15 cm equipped with with struts for crane movement.
MXT M outside corner 250 Mammut XT Outside corner 250/10 23-152-60 0.50 73.60 MXT Galvanized. For 90° corners. Side lengths 0, 10 and 15 cm. Steel frame with alkus facing. Cross stiffeners with welded-in DW-threaded nuts; corners with side lengths 10 and 15 cm equipped with with struts for crane movement.
MXT M outside corner 250 Mammut XT Outside corner 250/15 23-152-80 0.75 88.00 MXT Galvanized. For 90° corners. Side lengths 0, 10 and 15 cm. Steel frame with alkus facing. Cross stiffeners with welded-in DW-threaded nuts; corners with side lengths 10 and 15 cm equipped with with struts for crane movement.
MXT M outside corner 125 M-outside corner 125 23-140-20 28.50 MXT Galvanized. For 90° corners. Side lengths 0, 10 and 15 cm. Steel frame with alkus facing. Cross stiffeners with welded-in DW-threaded nuts; corners with side lengths 10 and 15 cm equipped with with struts for crane movement.
MXT M outside corner 125 Mammut XT Outside corner 125/10 23-152-65 0.25 38.20 MXT Galvanized. For 90° corners. Side lengths 0, 10 and 15 cm. Steel frame with alkus facing. Cross stiffeners with welded-in DW-threaded nuts; corners with side lengths 10 and 15 cm equipped with with struts for crane movement.
MXT M outside corner 125 Mammut XT Outside corner 125/15 23-152-85 0.38 45.50 MXT Galvanized. For 90° corners. Side lengths 0, 10 and 15 cm. Steel frame with alkus facing. Cross stiffeners with welded-in DW-threaded nuts; corners with side lengths 10 and 15 cm equipped with with struts for crane movement.
MXT M hinged inside corner M 350-hinged inside corner 350/40 23-137-30 2.73 235.00 MXT Steel construction with steel sheeting. Primed and cavity-sealed. Side length 40 cm. Adjustable angle 60°–180°.
MXT M hinged inside corner M-hinged inside corner 250/40 23-137-41 2.00 166.00 MXT Steel construction with steel sheeting. Primed and cavity-sealed. Side length 40 cm. Adjustable angle 60°–180°.
MXT M hinged inside corner M-hinged inside corner 125/40 23-137-51 1.00 85.50 MXT Steel construction with steel sheeting. Primed and cavity-sealed. Side length 40 cm. Adjustable angle 60°–180°.
MXT M hinged outside corner M 350-hinged outside corner 350/12.5 23-137-70 0.88 114.60 MXT Steel construction with steel sheeting. Primed and cavity-sealed. Side length 12.5 cm. Adjustable angle 60°–180°.
MXT M hinged outside corner M-hinged outside corner 250/12.5 23-137-81 0.62 81.60 MXT Steel construction with steel sheeting. Primed and cavity-sealed. Side length 12.5 cm. Adjustable angle 60°–180°.
MXT M hinged outside corner M-hinged outside corner 125/12.5 23-137-91 0.32 42.00 MXT Steel construction with steel sheeting. Primed and cavity-sealed. Side length 12.5 cm. Adjustable angle 60°–180°.
MXT M 350 stripping corner M 350 stripping corner 350/25 23-151-00 1.75 189.71 MXT Steel construction with steel sheeting. Side length 25 cm. With tie holes. When the bell-crank lever is pushed upwards with a crowbar, the corner is removed 17.5 mm away from the concrete and the formwork 35 mm away from the concrete on both sides.
MXT M 350 stripping corner M 350 stripping corner 250/25 23-151-20 1.25 141.06 MXT Steel construction with steel sheeting. Side length 25 cm. With tie holes. When the bell-crank lever is pushed upwards with a crowbar, the corner is removed 17.5 mm away from the concrete and the formwork 35 mm away from the concrete on both sides.
MXT M 350 stripping corner M 350 stripping corner 125/25 23-151-30 0.62 80.30 MXT Steel construction with steel sheeting. Side length 25 cm. With tie holes. When the bell-crank lever is pushed upwards with a crowbar, the corner is removed 17.5 mm away from the concrete and the formwork 35 mm away from the concrete on both sides.
MXT Adhesive tape, red Adhesive tape 50 m, red 41-912-10 0.83 MXT Not shown here. Reinforced adhesive tape, red, 50 mm wide, 50 running metres. Total thickness: 270 mµ. Natural rubber adhesive on one side. PE-coated.
MXT Stripping support Stripping support 29-306-30 5.00 MXT The stripping support is used to easily activate the stripping corner from above. Use a power screwdriver, a ratchet wrench or a spanner to activate the stripping support. The tools must have spanner width (SW) 27 or 30 or 36.
MXT M assembly lock M-assembly lock 29-400-71 3.00 MXT Galvanized. Tightly connects and aligns Mammut panels. Clamping length 12 cm.
MXT Uni-assembly lock Uni-assembly lock 22 29-400-85 3.60 MXT Galvanized. For stepless compensation. Clamping length 22 cm or 28 cm.
MXT Uni-assembly lock Uni-assembly lock 28 29-400-90 3.90 MXT Galvanized. For stepless compensation. Clamping length 22 cm or 28 cm.
MXT RS-assembly lock RS-assembly lock 23-807-70 4.70 MXT Galvanized, For stepless length compensation. Clamping length is 11.9 to 20.5 cm for stepless compensation.
MXT Flange screw 18 Flange screw 18 29-401-10 1.10 MXT Galvanized. Used to attach accessories such as brace frames, push-pull props, alignment rails, etc. Thread length 18 cm.
MXT M-cross stiffener 44 M-cross stiffener 44 29-401-02 6.30 MXT Galvanized. Short alignment rail used to brace panel joints for crane ganging and to reinforce length compensations.
MXT M outside corner bracket M-outside corner bracket, galv. 23-137-63 12.00 MXT Galvanized. Provides together with M panels and flange screws 18 a tight outside corner assembly. Primarily used for concreting heights over 425 cm.
MXT M-column bracket M-column bracket size 1 35/34 29-402-13 7.00 MXT Galvanized; to build rectangular columns with M-panels or stop ends, etc. Is attached to the multi-function profile with flange screw 18.
MXT Stop end bracket Stop end bracket 40/60 29-105-50 15.40 MXT Galvanized. Is used to form stop ends. Stop end bracket 40/60 for wall thickness up to 40 cm and profile widths of 40 and 60 mm. Stop end bracket 2.5‘ - 60/23 for wall thickness up 75 cm (2.5‘) and profile widths of 23 mm (EcoAs) and 60 mm.
MXT Stop end bracket Stop end bracket 2.5' - 60/23 29-105-60 20.00 MXT Galvanized. Is used to form stop ends. Stop end bracket 40/60 for wall thickness up to 40 cm and profile widths of 40 and 60 mm. Stop end bracket 2.5‘ - 60/23 for wall thickness up 75 cm (2.5‘) and profile widths of 23 mm (EcoAs) and 60 mm.
MXT M column clamp M-Column clamp 21, galv. 29-402-70 4.00 MXT Galvanized. Is used to attach alignment rails to panels when forming stop ends. Suited for 60 mm frame profiles of Mammut and Mammut 350 panels. A flange nut 100 or an articulated flange nut 15/120 is also required. The column clamp is attached to the multi-function profile with a flange screw 18.
MXT Plug Plug D35/38 29-902-71 0.40 MXT PVC. Used to seal unused Mammut XT tie holes. D35/... for XT tie hole, D27/... for frame tie hole.
MXT Plug Plug D35/38 without imprint 29-902-72 0.40 MXT PVC. Used to seal unused Mammut XT tie holes. D35/... for XT tie hole, D27/... for frame tie hole.
MXT Plug Plug D27/30 29-902-61 0.30 MXT PVC. Used to seal unused Mammut XT tie holes. D35/... for XT tie hole, D27/... for frame tie hole.
MXT Plug Plug D27/30 without imprint 29-902-67 0.20 MXT PVC. Used to seal unused Mammut XT tie holes. D35/... for XT tie hole, D27/... for frame tie hole.
MXT Plug Plug D27 without imprint, flat 29-902-68 1.00 MXT PVC. Used to seal unused Mammut XT tie holes. D35/... for XT tie hole, D27/... for frame tie hole.
MXT Plug Plug D20 without imprint 29-902-62 0.20 MXT PVC. Used to seal unused Mammut XT tie holes. D35/... for XT tie hole, D27/... for frame tie hole.
MXT Plug Plug D20 29-902-63 0.20 MXT PVC. Used to seal unused Mammut XT tie holes. D35/... for XT tie hole, D27/... for frame tie hole.
MXT M alignment rail M-alignment rail 75, galv. 29-400-95 11.00 MXT Galvanized. Used to brace panel joints for crane ganging, to bridge problem areas, to brace compensation areas and to create stop ends with column clamps. Attached to the formwork by means of flange screws.
MXT M alignment rail M-alignment rail 180, galv. 29-400-92 24.80 MXT Galvanized. Used to brace panel joints for crane ganging, to bridge problem areas, to brace compensation areas and to create stop ends with column clamps. Attached to the formwork by means of flange screws.
MXT M alignment rail M-alignment rail 250, galv. 29-402-50 34.50 MXT Galvanized. Used to brace panel joints for crane ganging, to bridge problem areas, to brace compensation areas and to create stop ends with column clamps. Attached to the formwork by means of flange screws.
MXT M alignment rail M-alignment rail 350, reinforced 29-402-45 124.00 MXT Galvanized. Used to brace panel joints for crane ganging, to bridge problem areas, to brace compensation areas and to create stop ends with column clamps. Attached to the formwork by means of flange screws.
MXT M alignment rail M-alignment rail 450 29-402-40 84.00 MXT Galvanized. Used to brace panel joints for crane ganging, to bridge problem areas, to brace compensation areas and to create stop ends with column clamps. Attached to the formwork by means of flange screws.
MXT M alignment rail M-alignment rail 450, reinforced 29-402-38 159.00 MXT Galvanized. Used to brace panel joints for crane ganging, to bridge problem areas, to brace compensation areas and to create stop ends with column clamps. Attached to the formwork by means of flange screws.
MXT Tie rod holder Tie rod fixture Ø35 29-927-05 1.20 MXT Galvanized. Used to hold DW tie rods with articulated flange nut, XT tie rods or XT taper ties. Can be used with horizontal or vertical MEVA wall formwork panels.
MXT XT tie rod DW 20 XT tie rod DW 20/75 23-154-35 4.75 MXT Uncoated, with DW 20 thread. DIN 18216, not weldable. Used for single-sided and conventional tying of panels on double-sided formwork. Permissible load 160 kN. With integrated articulated flange nut. Length = 75 cm for wall thickness up to 40 cm, Length = 120 cm for wall thickness up to 85 cm.
MXT XT tie rod DW 20 XT tie rod DW 20/120 23-154-40 5.89 MXT Uncoated, with DW 20 thread. DIN 18216, not weldable. Used for single-sided and conventional tying of panels on double-sided formwork. Permissible load 160 kN. With integrated articulated flange nut. Length = 75 cm for wall thickness up to 40 cm, Length = 120 cm for wall thickness up to 85 cm.
MXT XT taper tie 20/... XT taper tie 20/15–25 23-154-10 5.70 MXT Coated, with DW 20 thread and conical, smooth middle section. Used for single-sided tying of panels on double-sided formwork. Permissible load 160 kN. With integrated XT articulated flange nut, fixation screw and adjustment rings for centimetre-precise wall thickness adjustment between 15 and 25 cm, 20 and 30 cm and 35 and 45 cm.
MXT XT taper tie 20/... XT taper tie 20/20–30 23-154-15 5.90 MXT Coated, with DW 20 thread and conical, smooth middle section. Used for single-sided tying of panels on double-sided formwork. Permissible load 160 kN. With integrated XT articulated flange nut, fixation screw and adjustment rings for centimetre-precise wall thickness adjustment between 15 and 25 cm, 20 and 30 cm and 35 and 45 cm.
MXT XT taper tie 20/... XT taper tie 20/35–45 23-154-20 6.40 MXT Coated, with DW 20 thread and conical, smooth middle section. Used for single-sided tying of panels on double-sided formwork. Permissible load 160 kN. With integrated XT articulated flange nut, fixation screw and adjustment rings for centimetre-precise wall thickness adjustment between 15 and 25 cm, 20 and 30 cm and 35 and 45 cm.
MXT XT lever XT lever 23-154-95 0.30 MXT Galvanized. Used to rotate and adjust the XT tie hole.
MXT XT sealing cone XT sealing cone 10 29-902-35 1.00 MXT Plastic. Used to seal the tie holes when using the XT tie rod and the XT taper tie.
MXT XT sealing cone XT sealing cone 29-902-34 1.00 MXT Plastic. Used to seal the tie holes when using the XT tie rod and the XT taper tie.
MXT Cone for plastic tube Cone for plastic tube D32/10 29-902-55 6.50 MXT Available with 10 mm covering .
MXT Plastic tube D32 Plastic tube D32/36 L 2000 mm 29-902-28 10.00 MXT Plastic tube for use as an anchor sleeve for a tie rod DW20.
MXT Plug D32 Plug D32 29-902-58 3.00 MXT For closing the anchor points in the wall when using grooved Plastic tubes D32. Two plugs are required per anchor point.
MXT Plastic tube D23/200 Plastic tube D23/200 29-902-31 11.00 MXT Plastic tube for use as an anchor sleeve for a XT tie rod DW 20.
MXT Plastic tube D23/200 Plastic tube D23/18 29-902-03 2.00 MXT Plastic tube for use as an anchor sleeve for a XT tie rod DW 20.
MXT Plastic tube D23/200 Plastic tube D23/23 29-902-04 2.50 MXT Plastic tube for use as an anchor sleeve for a XT tie rod DW 20.
MXT Plastic tube D23/200 Plastic tube D23/28 29-902-05 3.00 MXT Plastic tube for use as an anchor sleeve for a XT tie rod DW 20.
MXT Plastic tube D23/200 Plastic tube D23/33 29-902-06 4.00 MXT Plastic tube for use as an anchor sleeve for a XT tie rod DW 20.
MXT XT plug D46 XT-Plug D46 29-902-76 5.00 MXT Grey plastic. Used to close the tie holes in the concrete when using XT DW tie rods with plastic tubes or when using XT taper ties. The XT plug D46 is recessed in the shadow gap. Two sealing plugs are required per anchor point.
MXT XT cone DW 20 XT-Cone DW 20 29-902-37 2.00 MXT PE; used on the initial formwork of Mammut XT when using the XT tie rod DW 20 in order to set the distance. Replaces XT sleeve (29-902-36).
MXT Tie hole plug Tie hole plug D27x20 29-902-78 MXT Polypropylene, for closing anchor points Ø 27 mm or 35 mm in alkus AL 20 sheets.
MXT Tie hole plug Tie hole plug D35x20 29-902-79 MXT Polypropylene, for closing anchor points Ø 27 mm or 35 mm in alkus AL 20 sheets.
MXT XT Fibre concrete plug 47 x 8,5 XT-Fibre concrete plug 47 x 8,5 29-902-82 6.75 MXT Nor shown. Made of fibre concrete, to close anchor points on the walls when using XT-seal cones 10 (29-902-35), the plugs are glued in place by concrete glue A + B (53-210-70)
MXT Tie rod DW Tie rod DW 20/120 29-900-97 3.00 MXT Uncoated, not weldable; DIN 18216; with DW thread; admissible load capacity 160 kN (Ø 20 mm); is used to tie panels of a double-sided formwork.
MXT Tie wrench DW15/DW20 Tie wrench DW15/DW20 29-901-39 4.50 MXT Made of steel, galvanized. Used to screw in, screw out and hold tie rods DW15 and DW20; length 400 mm.
MXT Articulated flange nut Articulated flange nut 20/140 29-900-05 2.40 MXT Forged, galvanized. DIN 18216, with DW thread Ø 20 mm, plate Ø 140 mm, max. inclination 10°, WAF 36 mm. Permissible load 160 kN.
MXT Spanner Spanner SW 27 29-800-10 1.80 MXT Yellow chromatised bit. WAF 27 or 36 mm. Used to tighten and loosen XT tie rod DW 20, flange nuts 100, articulated flange nuts 15/120 (or 20/140 with WAF 36) and flange screws.
MXT Spanner Spanner SW 36 29-800-15 3.30 MXT Yellow chromatised bit. WAF 27 or 36 mm. Used to tighten and loosen XT tie rod DW 20, flange nuts 100, articulated flange nuts 15/120 (or 20/140 with WAF 36) and flange screws.
MXT Uni-tie claw Uni-tie claw 29-901-41 1.52 MXT Galvanized. Permits tieing directly above or beside the panels. Is suited for panels with profile widths of 40 and 60 mm.
MXT M crane hook M-crane hook 29-401-21 9.60 MXT Used to move panels. Self-locking; load capacity 15 kN (1.5 tons). Each gang requires two crane hooks. Refer to the operating instructions for the application and safety inspection.
MXT Brace frame 250 Brace frame 250 with formwork-prop connector 29-109-20 31.50 MXT Galvanized. Available with formwork-prop connector. Is used to align and brace the formwork. Consists of a push-pull prop R 250 (190–320 cm), a brace SRL 120 (90–150 cm) and a double-jointed footplate.The formwork-prop connectors are attached to the formwork with flange screws 18.
MXT Formwork-prop connector Formwork-prop connector 29-804-85 1.65 MXT Galvanized. Including head bolt 16/90 and cotter pin 4. Used to connect brace frames, braces and push-pull props to the multi-function profile with flange screw 18. Maximum tube diameter of the braces and push-pull props is 48 mm.
MXT Push-pull prop R Push-pull prop R 160 29-109-40 12.60 MXT Galvanized. Guarantees tensile and compression strength. Aligns and supports wall and column formwork. The footplate and connectors must be ordered separately.
MXT Push-pull prop R Push-pull prop R 250 29-109-60 17.20 MXT Galvanized. Guarantees tensile and compression strength. Aligns and supports wall and column formwork. The footplate and connectors must be ordered separately.
MXT Push-pull prop R Push-pull prop R 460 29-109-80 34.00 MXT Galvanized. Guarantees tensile and compression strength. Aligns and supports wall and column formwork. The footplate and connectors must be ordered separately.
MXT Push-pull prop R Push-pull prop R 630 29-109-85 57.00 MXT Galvanized. Guarantees tensile and compression strength. Aligns and supports wall and column formwork. The footplate and connectors must be ordered separately.
MXT Brace SRL Brace SRL 120 29-108-80 8.79 MXT Galvanized. Guarantees tensile and compression strength. Consists of a right and left-hand spindle as well as a revolving central part. Aligns and supports wall and column formwork. The footplate and connectors must be ordered separately.
MXT Brace SRL Brace SRL 170 29-108-90 11.50 MXT Galvanized. Guarantees tensile and compression strength. Consists of a right and left-hand spindle as well as a revolving central part. Aligns and supports wall and column formwork. The footplate and connectors must be ordered separately.
MXT Foot plate Double-jointed foot plate (RS Ø to 57 mm) 29-402-32 4.00 MXT Galvanized. With head bolt 16/90 and cotter pin 4. Serves as foot plate for brace frames 250 and as connector for braces and push-pull props up to Ø 57 mm.
MXT Foot plate Foot plate 60 (RS Ø to 57 mm) 29-427-50 3.00 MXT Galvanized. With head bolt 16/90 and cotter pin 4. Serves as foot plate for brace frames 250 and as connector for braces and push-pull props up to Ø 57 mm.
MXT Articulated foot plate Articulated foot plate (RS Ø to 57 mm) 29-802-48 2.30 MXT Galvanized. With head bolt 16/90 and cotter pin 4. For push-pull props and braces of up to Ø 57 mm.
MXT Head bolt 16/90 Head bolt 16/90, galv. 42-413-50 0.17 MXT Galvanized. Is used to attach push-pull props and braces to foot plates and formwork-prop connectors.
MXT Cotter pin 4 Cotter pin D=4 62-010-04 0.50 MXT Galvanized. Locks the head bolt.
MXT Collapsible clip Collapsible clip 4.5 62-010-03 0.25 MXT Not shown. Galvanized. Locks the head bolt.
MXT Walkway bracket Walkway bracket 90 (yellow), galv. 29-106-00 10.30 MXT Galvanized, yellow, pluggable. Is used as working and safety scaffold. Is attached to the multi-function profile and secured to the multi-function profile below with a flange screw 18. The planking can be mounted to the brackets. Working width approx. 90 cm. MEVA Guard-railing post is also required. Bracket spacing depends on type of planking (DIN 4420).
MXT Guard-railing post Guard-railing post 100 29-106-75 3.70 MXT Galvanized. Is plugged into the walkway bracket.
MXT Guard-railing post Guard-railing post 140 29-106-85 4.70 MXT Galvanized. Is plugged into the walkway bracket.
MXT Guard-railing post 48 Guard-railing post 48/120 (UK) 29-106-80 5.50 MXT Galvanized. With manifold to be plugged into the walkway bracket and with 48 mm Ø tube to attach scaffold couplers.
MXT Guard-railing post 48 Guard-railing post 48/134 29-920-80 5.45 MXT Galvanized. With manifold to be plugged into the walkway bracket and with 48 mm Ø tube to attach scaffold couplers.
MXT Tilting bracket 40/60 Tilting bracket 40/60 29-920-82 4.95 MXT Galvanised. Used to attach MEVA guardrailing posts to create a fall protection system. It can be set up vertically to facilitate the installation of safety meshes or railing boards or inclined by 15° to create a larger working area. Secured with a wedge to the frame profile of 40 and 60 mm.
MXT Side railing Side railing 90/100, galv. 29-108-20 12.30 MXT Galvanized. Is plugged into the walkway bracket.
MXT Side railing Side railing 125/100, galv. 29-108-30 13.80 MXT Galvanized. Is plugged into the walkway bracket.
MXT Scaffold tube Scaffold tube 48/200 29-412-23 9.40 MXT Galvanized. Is used as hand-rail / mid-rail in combination with guard-railing post 48.
MXT Scaffold tube Scaffold tube 48/300 29-412-26 14.10 MXT Galvanized. Is used as hand-rail / mid-rail in combination with guard-railing post 48.
MXT Scaffold tube Scaffold tube 48/400 29-412-27 18.80 MXT Galvanized. Is used as hand-rail / mid-rail in combination with guard-railing post 48.
MXT Swivel-joint coupler 48/48 Swivel-joint coupler 48/48 29-412-52 1.20 MXT Galvanized. Connects 2 scaffold tubes with Ø 48.3 mm at any angle required.
MXT Lifting hook 60 Lifting hook 60 29-401-40 1.72 MXT Galvanized. Allows any 4-rope crane slings available on site to be used to move panel stacks. Always use 4 hooks at a time. Max. load capacity 10 kN (1 ton) per lifting hook. Max. weight of a panel stack 2 tons. Refer to the lifting hook Operating Instructions for application and safety test.
MXT Crane slings 60 Crane slings 60 29-401-45 22.00 MXT 4 polyester ropes, 5 m long. With 60 cm lifting chain and 4 lifting hooks. Max load capacity 20 kN (2 tons). Is used to load and unload trucks and to move panel stacks near the ground.
MXT Ladder Ladder 348 29-414-50 23.20 MXT Galvanized. Is hooked into the CF‑access platform and automatically secured. Can be extended with extension ladders. Safety cages are required for operational safety.
MXT Ladder Ladder 318 29-414-55 21.10 MXT Galvanized. Is hooked into the CF‑access platform and automatically secured. Can be extended with extension ladders. Safety cages are required for operational safety.
MXT Ladder Ladder 243 29-416-50 17.20 MXT Galvanized. Is hooked into the CF‑access platform and automatically secured. Can be extended with extension ladders. Safety cages are required for operational safety.
MXT Extension ladder 210 Extension ladder 270 29-416-52 19.20 MXT Galvanized. Depending on the required height, the extension ladder is either hooked into the steps of the ladder or bolted to the ladder with the ladder connector.
MXT Extension ladder 210 Extension ladder 210 29-414-60 15.90 MXT Galvanized. Depending on the required height, the extension ladder is either hooked into the steps of the ladder or bolted to the ladder with the ladder connector.
MXT Extension ladder 210 Extension ladder 120 29-416-55 8.50 MXT Galvanized. Depending on the required height, the extension ladder is either hooked into the steps of the ladder or bolted to the ladder with the ladder connector.
MXT Extension ladder 210 Extension ladder 90 29-416-60 7.40 MXT Galvanized. Depending on the required height, the extension ladder is either hooked into the steps of the ladder or bolted to the ladder with the ladder connector.
MXT Extension ladder 210 Extension ladder 60 29-416-62 4.40 MXT Galvanized. Depending on the required height, the extension ladder is either hooked into the steps of the ladder or bolted to the ladder with the ladder connector.
MXT Ladder connector Ladder connector 29-414-70 1.03 MXT Galvanized. Connects the joint of two extension ladders without the need to hook one ladder into a step of the other.
MXT Safety cage Safety cage 210 29-414-85 27.90 MXT Galvanized. Internal Ø 70 cm. Protects workers when ascending and descending the ladder. The safety cages are attached to the (extension) ladders with the integrated hammerhead screws.
MXT Safety cage Safety cage 85 29-414-90 12.00 MXT Galvanized. Internal Ø 70 cm. Protects workers when ascending and descending the ladder. The safety cages are attached to the (extension) ladders with the integrated hammerhead screws.
MXT Safety cage Safety cage 40 29-416-90 8.20 MXT Galvanized. Internal Ø 70 cm. Protects workers when ascending and descending the ladder. The safety cages are attached to the (extension) ladders with the integrated hammerhead screws.
MXT Ladder fixture, upper wall formwork Ladder fixture, upper wall formwork 29-416-82 7.90 MXT Galvanized. Attached to the multi-function profile at the top of the horizontal or vertical panel to hold the ladder or extension ladder.
MXT Ladder fixture, lower wall formwork Ladder fixture, lower wall formwork 29-416-84 2.40 MXT Galvanized. Attached to the multi-function profile at the bottom of the horizontal or vertical panel to hold the ladder or extension ladder.
MXT Folding access platform BKB 125 Folding access platform BKB 125/235 29-417-10 185.00 MXT Self-locking; ready-made platform with a foldable guard-railing and an overall width of 125 cm; it is supsended onto the frame profile of the panels. The 48 mm thick planking is protected at the front ends. Stacking height 17cm; load capacity 2 kN/m². This platform is used with the formwork systems AluStar/StarTec and Mammut/Mammut 350/Mammut XT.
MXT Folding access platform BKB 125 Folding access platform BKB 125/300 29-417-20 205.00 MXT Self-locking; ready-made platform with a foldable guard-railing and an overall width of 125 cm; it is supsended onto the frame profile of the panels. The 48 mm thick planking is protected at the front ends. Stacking height 17cm; load capacity 2 kN/m². This platform is used with the formwork systems AluStar/StarTec and Mammut/Mammut 350/Mammut XT.
MXT Folding access platform BKB 125 Folding access platform BKB 125/140 29-417-00 120.00 MXT Self-locking; ready-made platform with a foldable guard-railing and an overall width of 125 cm; it is supsended onto the frame profile of the panels. The 48 mm thick planking is protected at the front ends. Stacking height 17cm; load capacity 2 kN/m². This platform is used with the formwork systems AluStar/StarTec and Mammut/Mammut 350/Mammut XT.
MXT Folding access platform BKB 125 Side railing BKB 125 29-417-30 17.00 MXT Self-locking; ready-made platform with a foldable guard-railing and an overall width of 125 cm; it is supsended onto the frame profile of the panels. The 48 mm thick planking is protected at the front ends. Stacking height 17cm; load capacity 2 kN/m². This platform is used with the formwork systems AluStar/StarTec and Mammut/Mammut 350/Mammut XT.
Mammut 350 M 350-panel M 350-panel AL 20 23-005-05 350/250 8.75 581.50 Mammut 350 Construction height 12 cm, frame profile width 60 mm. Three tie holes per panel height 350 cm and 300 cm, two tie holes per panel height 250 cm. The frames of M 350-panels are made of closed steel profiles and are torsion-proof. M 350-panels are equipped with alkus facing. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
Mammut 350 M 350-panel M 350-panel AL 20 23-005-20 350/125 4.38 260.00 Mammut 350 Construction height 12 cm, frame profile width 60 mm. Three tie holes per panel height 350 cm and 300 cm, two tie holes per panel height 250 cm. The frames of M 350-panels are made of closed steel profiles and are torsion-proof. M 350-panels are equipped with alkus facing. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
Mammut 350 M 350-panel M 350-panel AL 20 23-005-30 350/100 3.50 215.50 Mammut 350 Construction height 12 cm, frame profile width 60 mm. Three tie holes per panel height 350 cm and 300 cm, two tie holes per panel height 250 cm. The frames of M 350-panels are made of closed steel profiles and are torsion-proof. M 350-panels are equipped with alkus facing. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
Mammut 350 M 350-panel M 350-panel AL 20 23-005-35 350/ 75 2.63 174.00 Mammut 350 Construction height 12 cm, frame profile width 60 mm. Three tie holes per panel height 350 cm and 300 cm, two tie holes per panel height 250 cm. The frames of M 350-panels are made of closed steel profiles and are torsion-proof. M 350-panels are equipped with alkus facing. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
Mammut 350 M 350-panel M 350-panel AL 20 23-005-45 350/ 55 1.93 139.00 Mammut 350 Construction height 12 cm, frame profile width 60 mm. Three tie holes per panel height 350 cm and 300 cm, two tie holes per panel height 250 cm. The frames of M 350-panels are made of closed steel profiles and are torsion-proof. M 350-panels are equipped with alkus facing. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
Mammut 350 M 350-panel M 350-panel AL 20 23-005-50 350/ 50 1.75 131.00 Mammut 350 Construction height 12 cm, frame profile width 60 mm. Three tie holes per panel height 350 cm and 300 cm, two tie holes per panel height 250 cm. The frames of M 350-panels are made of closed steel profiles and are torsion-proof. M 350-panels are equipped with alkus facing. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
Mammut 350 M 350-panel M 350-panel AL 20 23-005-55 350/ 45 1.57 121.00 Mammut 350 Construction height 12 cm, frame profile width 60 mm. Three tie holes per panel height 350 cm and 300 cm, two tie holes per panel height 250 cm. The frames of M 350-panels are made of closed steel profiles and are torsion-proof. M 350-panels are equipped with alkus facing. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
Mammut 350 M 350-panel M 350-panel AL 20 23-005-70 350/ 30 1.05 93.20 Mammut 350 Construction height 12 cm, frame profile width 60 mm. Three tie holes per panel height 350 cm and 300 cm, two tie holes per panel height 250 cm. The frames of M 350-panels are made of closed steel profiles and are torsion-proof. M 350-panels are equipped with alkus facing. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
Mammut 350 M 350-panel M 350-panel AL 20 23-005-75 350/ 25 0.88 86.00 Mammut 350 Construction height 12 cm, frame profile width 60 mm. Three tie holes per panel height 350 cm and 300 cm, two tie holes per panel height 250 cm. The frames of M 350-panels are made of closed steel profiles and are torsion-proof. M 350-panels are equipped with alkus facing. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
Mammut 350 M 350-panel M 350-panel AL 20 23-006-05 300/250 7.50 464.00 Mammut 350 Construction height 12 cm, frame profile width 60 mm. Three tie holes per panel height 350 cm and 300 cm, two tie holes per panel height 250 cm. The frames of M 350-panels are made of closed steel profiles and are torsion-proof. M 350-panels are equipped with alkus facing. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
Mammut 350 M 350-panel M 350-panel AL 20 23-006-20 300/125 3.75 205.00 Mammut 350 Construction height 12 cm, frame profile width 60 mm. Three tie holes per panel height 350 cm and 300 cm, two tie holes per panel height 250 cm. The frames of M 350-panels are made of closed steel profiles and are torsion-proof. M 350-panels are equipped with alkus facing. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
Mammut 350 M 350-panel M 350-panel AL 20 23-006-30 300/100 3.00 170.50 Mammut 350 Construction height 12 cm, frame profile width 60 mm. Three tie holes per panel height 350 cm and 300 cm, two tie holes per panel height 250 cm. The frames of M 350-panels are made of closed steel profiles and are torsion-proof. M 350-panels are equipped with alkus facing. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
Mammut 350 M 350-panel M 350-panel AL 20 23-006-35 300/ 75 2.25 138.50 Mammut 350 Construction height 12 cm, frame profile width 60 mm. Three tie holes per panel height 350 cm and 300 cm, two tie holes per panel height 250 cm. The frames of M 350-panels are made of closed steel profiles and are torsion-proof. M 350-panels are equipped with alkus facing. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
Mammut 350 M 350-panel M 350-panel AL 20 23-006-45 300/ 55 1.65 113.00 Mammut 350 Construction height 12 cm, frame profile width 60 mm. Three tie holes per panel height 350 cm and 300 cm, two tie holes per panel height 250 cm. The frames of M 350-panels are made of closed steel profiles and are torsion-proof. M 350-panels are equipped with alkus facing. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
Mammut 350 M 350-panel M 350-panel AL 20 23-006-50 300/ 50 1.50 106.50 Mammut 350 Construction height 12 cm, frame profile width 60 mm. Three tie holes per panel height 350 cm and 300 cm, two tie holes per panel height 250 cm. The frames of M 350-panels are made of closed steel profiles and are torsion-proof. M 350-panels are equipped with alkus facing. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
Mammut 350 M 350-panel M 350-panel AL 20 23-006-55 300/ 45 1.35 100.50 Mammut 350 Construction height 12 cm, frame profile width 60 mm. Three tie holes per panel height 350 cm and 300 cm, two tie holes per panel height 250 cm. The frames of M 350-panels are made of closed steel profiles and are torsion-proof. M 350-panels are equipped with alkus facing. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
Mammut 350 M 350-panel M 350-panel AL 20 23-006-70 300/ 30 0.90 81.50 Mammut 350 Construction height 12 cm, frame profile width 60 mm. Three tie holes per panel height 350 cm and 300 cm, two tie holes per panel height 250 cm. The frames of M 350-panels are made of closed steel profiles and are torsion-proof. M 350-panels are equipped with alkus facing. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
Mammut 350 M 350-panel M 350-panel AL 20 23-006-75 300/ 25 0.75 75.00 Mammut 350 Construction height 12 cm, frame profile width 60 mm. Three tie holes per panel height 350 cm and 300 cm, two tie holes per panel height 250 cm. The frames of M 350-panels are made of closed steel profiles and are torsion-proof. M 350-panels are equipped with alkus facing. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
Mammut 350 M 350-panel M 350-panel AL 20 23-007-20 250/125 3.13 184.00 Mammut 350 Construction height 12 cm, frame profile width 60 mm. Three tie holes per panel height 350 cm and 300 cm, two tie holes per panel height 250 cm. The frames of M 350-panels are made of closed steel profiles and are torsion-proof. M 350-panels are equipped with alkus facing. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
Mammut 350 M 350-panel M 350-panel AL 20 23-007-30 250/100 2.50 152.00 Mammut 350 Construction height 12 cm, frame profile width 60 mm. Three tie holes per panel height 350 cm and 300 cm, two tie holes per panel height 250 cm. The frames of M 350-panels are made of closed steel profiles and are torsion-proof. M 350-panels are equipped with alkus facing. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
Mammut 350 M 350-panel M 350-panel AL 20 23-007-35 250/ 75 1.88 123.00 Mammut 350 Construction height 12 cm, frame profile width 60 mm. Three tie holes per panel height 350 cm and 300 cm, two tie holes per panel height 250 cm. The frames of M 350-panels are made of closed steel profiles and are torsion-proof. M 350-panels are equipped with alkus facing. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
Mammut 350 M 350-panel M 350-panel AL 20 23-007-45 250/ 55 1.38 99.00 Mammut 350 Construction height 12 cm, frame profile width 60 mm. Three tie holes per panel height 350 cm and 300 cm, two tie holes per panel height 250 cm. The frames of M 350-panels are made of closed steel profiles and are torsion-proof. M 350-panels are equipped with alkus facing. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
Mammut 350 M 350-panel M 350-panel AL 20 23-007-50 250/ 50 1.25 93.00 Mammut 350 Construction height 12 cm, frame profile width 60 mm. Three tie holes per panel height 350 cm and 300 cm, two tie holes per panel height 250 cm. The frames of M 350-panels are made of closed steel profiles and are torsion-proof. M 350-panels are equipped with alkus facing. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
Mammut 350 M 350-panel M 350-panel AL 20 23-007-55 250/ 45 1.13 87.50 Mammut 350 Construction height 12 cm, frame profile width 60 mm. Three tie holes per panel height 350 cm and 300 cm, two tie holes per panel height 250 cm. The frames of M 350-panels are made of closed steel profiles and are torsion-proof. M 350-panels are equipped with alkus facing. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
Mammut 350 M 350-panel M 350-panel AL 20 23-007-70 250/ 30 0.75 67.50 Mammut 350 Construction height 12 cm, frame profile width 60 mm. Three tie holes per panel height 350 cm and 300 cm, two tie holes per panel height 250 cm. The frames of M 350-panels are made of closed steel profiles and are torsion-proof. M 350-panels are equipped with alkus facing. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
Mammut 350 M 350-panel M 350-panel AL 20 23-007-75 250/ 25 0.63 63.00 Mammut 350 Construction height 12 cm, frame profile width 60 mm. Three tie holes per panel height 350 cm and 300 cm, two tie holes per panel height 250 cm. The frames of M 350-panels are made of closed steel profiles and are torsion-proof. M 350-panels are equipped with alkus facing. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
Mammut 350 M 350-panel M 350-panel AL 20 23-008-20 125/125 1.56 98.00 Mammut 350 Construction height 12 cm, frame profile width 60 mm. Three tie holes per panel height 350 cm and 300 cm, two tie holes per panel height 250 cm. The frames of M 350-panels are made of closed steel profiles and are torsion-proof. M 350-panels are equipped with alkus facing. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
Mammut 350 M 350-panel M 350-panel AL 20 23-008-30 125/100 1.25 81.00 Mammut 350 Construction height 12 cm, frame profile width 60 mm. Three tie holes per panel height 350 cm and 300 cm, two tie holes per panel height 250 cm. The frames of M 350-panels are made of closed steel profiles and are torsion-proof. M 350-panels are equipped with alkus facing. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
Mammut 350 M 350-panel M 350-panel AL 20 23-008-35 125/ 75 0.94 65.00 Mammut 350 Construction height 12 cm, frame profile width 60 mm. Three tie holes per panel height 350 cm and 300 cm, two tie holes per panel height 250 cm. The frames of M 350-panels are made of closed steel profiles and are torsion-proof. M 350-panels are equipped with alkus facing. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
Mammut 350 M 350-panel M 350-panel AL 20 23-008-45 125/ 55 0.69 52.00 Mammut 350 Construction height 12 cm, frame profile width 60 mm. Three tie holes per panel height 350 cm and 300 cm, two tie holes per panel height 250 cm. The frames of M 350-panels are made of closed steel profiles and are torsion-proof. M 350-panels are equipped with alkus facing. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
Mammut 350 M 350-panel M 350-panel AL 20 23-008-50 125/ 50 0.63 49.00 Mammut 350 Construction height 12 cm, frame profile width 60 mm. Three tie holes per panel height 350 cm and 300 cm, two tie holes per panel height 250 cm. The frames of M 350-panels are made of closed steel profiles and are torsion-proof. M 350-panels are equipped with alkus facing. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
Mammut 350 M 350-panel M 350-panel AL 20 23-008-55 125/ 45 0.56 45.50 Mammut 350 Construction height 12 cm, frame profile width 60 mm. Three tie holes per panel height 350 cm and 300 cm, two tie holes per panel height 250 cm. The frames of M 350-panels are made of closed steel profiles and are torsion-proof. M 350-panels are equipped with alkus facing. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
Mammut 350 M 350-panel M 350-panel AL 20 23-008-70 125/ 30 0.38 36.50 Mammut 350 Construction height 12 cm, frame profile width 60 mm. Three tie holes per panel height 350 cm and 300 cm, two tie holes per panel height 250 cm. The frames of M 350-panels are made of closed steel profiles and are torsion-proof. M 350-panels are equipped with alkus facing. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
Mammut 350 M 350-panel M 350-panel AL 20 23-008-75 125/ 25 0.31 33.50 Mammut 350 Construction height 12 cm, frame profile width 60 mm. Three tie holes per panel height 350 cm and 300 cm, two tie holes per panel height 250 cm. The frames of M 350-panels are made of closed steel profiles and are torsion-proof. M 350-panels are equipped with alkus facing. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.
Mammut 350 Foundation tape Foundation tape 50 m 29-307-50 20.00 Mammut 350 Galvanized. Hole spacing 50 mm, hole Ø 16 mm, 50 m long. Admissible tractive force 10 kN. To be cut at hole center. Serves together with the appropriate tensioner as a bottom anchoring when panels are assembled in horizontal position.
Mammut 350 Tensioner M for foundation tape Tensioner M for foundation tape 29-307-60