Startec formwork system is transported with a crane hook

StarTec

The universal steel formwork that is capable of accommodating fresh concrete pressures of ­
60 ­kN­/m² is a genuine all-rounder. In terms of top ­performance and efficiency, the multi-purpose formwork boasts a long and impeccable track record worldwide. As StarTec is 100% compatible with the compact, lightweight AluStar formwork, it perfectly complements this crane-independent system as well.

Product characteristics

  • ​​​​​Size

    • Up to 8.91 m² contact area per panel (330 x 270 cm)

  • Capacity

    • Permissible fresh concrete pressure (to DIN 18218) over entire surface of 60 kN/m² (DIN 18202, Tab. 3, Line 6) 

  • Universal application in residential and commercial ­developments

  • Closed hollow steel frame profile

    • Structurally robust

    • Torsion-proof

    • Hot-dip galvanised to facilitate cleaning and reduce concrete adhesion

 

  • Smart multifunctional profile

    • Welded-in Dywidag nuts

    • All accessories, e.g. brackets, push-pull props and alignment rails, attached with MEVA flange screw

  • Tying for inclined or stepped-level formwork

    • Tie hole with conical steel anchor sleeve, welded in from both sides

  • Intelligent MEVA product design

    • MEVA assembly lock for a structurally continuous connection with only a few hammer blows

    • Bump notches for panel widths of 135 cm and more to ­simplify adjustment and alignment with crow bar

    • High-quality alkus all-plastic facing with 7-year warranty

  • Full compatibility with lightweight AluStar​​​​​​​

StarTec has the answer to many different challenges

AluStar and Startec formwork systems connected with assembly locks

  • Multi-function profile

    Made from closed hollow steel profiles with welded-in DW 15 nuts for rapid, structurally continuous connection of accessories

  • Hot-dip galvanised frame

    Surface finish facilitates cleaning and reduces concrete adhesion

  • Closed hollow profile

    For high stability and a long service life

  • Transport hole

    Designed to take the lifting hook 40 for rapid loading/unloading and movement of panel stacks

  • Bump notch

    Fitted at four corners for panel widths of 135 cm and more to simplify adjustment and alignment with crow bar

  • Tie hole

    With conical anchor sleeve, welded in from both sides

  • alkus all-plastic facing

    No water absorption, resistant to swelling and shrinkage. Smooth, robust surface guarantees a high-quality concrete finish, even after heavy use

Mounting of a flange screw to a formwork system

Flange screw 

Single component for strong connection of all accessories.

Technical drawing of the AS-assembly lock.

AS assembly lock 

Only one component needed for rapid, reliable panel connection: MEVA assembly lock. Allows single-handed fitting at any position along the frame. A few hammer blows suffice to achieve a strong, level and stepless panel connection.

Tie rod holder with tie rod on a formwork element

Tie rod fixture

For fixing to multi-purpose profile of upright or horizontal StarTec panels – for fast and safe transportation on site.

StarTec panels and corners

With panel heights of 330 cm to 75 cm and panel widths of 270 cm to 20 cm, StarTec is readily adaptable to specific geometries. Thanks to the variety of elements, all common wall thicknesses can be reproduced without fitting areas. 

The system also has articulated corners that are infinitely adjustable from 60° to 180°.

Drawing of the size grid of a StarTec formwork system

Panel overview

Panel width [cm] MPP Corner panels Fillers
 270 240 135 90 75 55   50 49  45  40   30 25  24   20   IC OC HIC HOC   SC      FS
Height [cm] 330 ■   ■ ■ ■ ■ ■       ■  ■        ■ ■ ■ ■ ■  
270   ■ ■ ■ ■  ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
135   ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■  ■ ■ ■ ■ ■ ■ ■
 90   ■   ■ ■ ■ ■         ■       ■ ■        
 75   ■                                      

MPP Multi-purpose panel, width 75 cm IC Inside corner, side length 25 cm OC Outside corner

HIC Hinged inside corner, side length 30 cm   HOC Hinged outside corner, side length 7.5 cm SC Stripping corner, side length 25 cm FS Filler strip, 5 cm

AluStar and Startec formwork systems connected with assembly locks

An unbeatable duo

Together, StarTec and AluStar comprise a product family featuring crane-­independent aluminium and large-format steel panels. The only component needed for their universal application is the assembly lock. No other adapters or connectors are required. Combined use of the two systems allows the ­efficient and flexible deployment of resources to meet all on-site demands.

Securit security system mounted on a StarTec formwork system

Cost-effective all-in system

The safety system with a working platform is easy to install using a single component – the flange screw. A loadbearing capacity of up to 200 kg/m² guarantees start-to-finish safety throughout the assembly and concreting operations.

 

 

Downloads

Referenzen