Item finder
Our simple item finder provides you with all relevant information about all MEVA products.
| System | Product | Application | Ref.-No. | Size | m² | kg | Product Page | Description/Application | Product Picture |
|---|---|---|---|---|---|---|---|---|---|
| EcoAs | EcoAs AL | EcoAs AL | 21-703-11 | 300/100 | 3.00 | 101.50 | EcoAs | Frame profile height 10 cm, frame profile width 23 mm. Three tie holes per panel heights 300 cm and 240 cm, two tie holes per panel heights 160 cm and 120 cm. Heights 240 cm, 160 cm and 120 cm: centered tie hole at the top and bottom for horizontal application. The frames of EA panels are made of closed steel profiles and are torsion proof. Eco As AL panels are equipped with alkus facing. All around grooves and EA assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi function profiles allow for an easy, fast and safe attachment of accessories. |
|
| EcoAs | EcoAs AL | EcoAs AL | 21-703-21 | 300/ 80 | 2.40 | 86.00 | EcoAs | Frame profile height 10 cm, frame profile width 23 mm. Three tie holes per panel heights 300 cm and 240 cm, two tie holes per panel heights 160 cm and 120 cm. Heights 240 cm, 160 cm and 120 cm: centered tie hole at the top and bottom for horizontal application. The frames of EA panels are made of closed steel profiles and are torsion proof. Eco As AL panels are equipped with alkus facing. All around grooves and EA assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi function profiles allow for an easy, fast and safe attachment of accessories. |
|
| EcoAs | EcoAs AL | EcoAs AL | 21-703-46 | 300/ 55 | 1.65 | 68.50 | EcoAs | Frame profile height 10 cm, frame profile width 23 mm. Three tie holes per panel heights 300 cm and 240 cm, two tie holes per panel heights 160 cm and 120 cm. Heights 240 cm, 160 cm and 120 cm: centered tie hole at the top and bottom for horizontal application. The frames of EA panels are made of closed steel profiles and are torsion proof. Eco As AL panels are equipped with alkus facing. All around grooves and EA assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi function profiles allow for an easy, fast and safe attachment of accessories. |
|
| EcoAs | EcoAs AL | EcoAs AL | 21-703-61 | 300/ 40 | 1.20 | 55.00 | EcoAs | Frame profile height 10 cm, frame profile width 23 mm. Three tie holes per panel heights 300 cm and 240 cm, two tie holes per panel heights 160 cm and 120 cm. Heights 240 cm, 160 cm and 120 cm: centered tie hole at the top and bottom for horizontal application. The frames of EA panels are made of closed steel profiles and are torsion proof. Eco As AL panels are equipped with alkus facing. All around grooves and EA assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi function profiles allow for an easy, fast and safe attachment of accessories. |
|
| EcoAs | EcoAs AL | EcoAs AL | 21-703-76 | 300/ 25 | 0.75 | 41.00 | EcoAs | Frame profile height 10 cm, frame profile width 23 mm. Three tie holes per panel heights 300 cm and 240 cm, two tie holes per panel heights 160 cm and 120 cm. Heights 240 cm, 160 cm and 120 cm: centered tie hole at the top and bottom for horizontal application. The frames of EA panels are made of closed steel profiles and are torsion proof. Eco As AL panels are equipped with alkus facing. All around grooves and EA assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi function profiles allow for an easy, fast and safe attachment of accessories. |
|
| EcoAs | EcoAs AL | EcoAs AL | 21-700-21 | 240/ 80 | 1.92 | 68.00 | EcoAs | Frame profile height 10 cm, frame profile width 23 mm. Three tie holes per panel heights 300 cm and 240 cm, two tie holes per panel heights 160 cm and 120 cm. Heights 240 cm, 160 cm and 120 cm: centered tie hole at the top and bottom for horizontal application. The frames of EA panels are made of closed steel profiles and are torsion proof. Eco As AL panels are equipped with alkus facing. All around grooves and EA assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi function profiles allow for an easy, fast and safe attachment of accessories. |
|
| EcoAs | EcoAs AL | EcoAs AL | 21-700-46 | 240/ 55 | 1.32 | 53.50 | EcoAs | Frame profile height 10 cm, frame profile width 23 mm. Three tie holes per panel heights 300 cm and 240 cm, two tie holes per panel heights 160 cm and 120 cm. Heights 240 cm, 160 cm and 120 cm: centered tie hole at the top and bottom for horizontal application. The frames of EA panels are made of closed steel profiles and are torsion proof. Eco As AL panels are equipped with alkus facing. All around grooves and EA assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi function profiles allow for an easy, fast and safe attachment of accessories. |
|
| EcoAs | EcoAs AL | EcoAs AL | 21-700-51 | 240/ 50 | 1.20 | 51.00 | EcoAs | Frame profile height 10 cm, frame profile width 23 mm. Three tie holes per panel heights 300 cm and 240 cm, two tie holes per panel heights 160 cm and 120 cm. Heights 240 cm, 160 cm and 120 cm: centered tie hole at the top and bottom for horizontal application. The frames of EA panels are made of closed steel profiles and are torsion proof. Eco As AL panels are equipped with alkus facing. All around grooves and EA assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi function profiles allow for an easy, fast and safe attachment of accessories. |
|
| EcoAs | EcoAs AL | EcoAs AL | 21-700-56 | 240/ 45 | 1.08 | 48.00 | EcoAs | Frame profile height 10 cm, frame profile width 23 mm. Three tie holes per panel heights 300 cm and 240 cm, two tie holes per panel heights 160 cm and 120 cm. Heights 240 cm, 160 cm and 120 cm: centered tie hole at the top and bottom for horizontal application. The frames of EA panels are made of closed steel profiles and are torsion proof. Eco As AL panels are equipped with alkus facing. All around grooves and EA assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi function profiles allow for an easy, fast and safe attachment of accessories. |
|
| EcoAs | EcoAs AL | EcoAs AL | 21-700-61 | 240/ 40 | 0.96 | 40.50 | EcoAs | Frame profile height 10 cm, frame profile width 23 mm. Three tie holes per panel heights 300 cm and 240 cm, two tie holes per panel heights 160 cm and 120 cm. Heights 240 cm, 160 cm and 120 cm: centered tie hole at the top and bottom for horizontal application. The frames of EA panels are made of closed steel profiles and are torsion proof. Eco As AL panels are equipped with alkus facing. All around grooves and EA assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi function profiles allow for an easy, fast and safe attachment of accessories. |
|
| EcoAs | EcoAs AL | EcoAs AL | 21-700-76 | 240/ 25 | 0.60 | 32.00 | EcoAs | Frame profile height 10 cm, frame profile width 23 mm. Three tie holes per panel heights 300 cm and 240 cm, two tie holes per panel heights 160 cm and 120 cm. Heights 240 cm, 160 cm and 120 cm: centered tie hole at the top and bottom for horizontal application. The frames of EA panels are made of closed steel profiles and are torsion proof. Eco As AL panels are equipped with alkus facing. All around grooves and EA assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi function profiles allow for an easy, fast and safe attachment of accessories. |
|
| EcoAs | EcoAs AL | EcoAs AL | 21-705-21 | 160/ 80 | 1.28 | 47.00 | EcoAs | Frame profile height 10 cm, frame profile width 23 mm. Three tie holes per panel heights 300 cm and 240 cm, two tie holes per panel heights 160 cm and 120 cm. Heights 240 cm, 160 cm and 120 cm: centered tie hole at the top and bottom for horizontal application. The frames of EA panels are made of closed steel profiles and are torsion proof. Eco As AL panels are equipped with alkus facing. All around grooves and EA assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi function profiles allow for an easy, fast and safe attachment of accessories. |
|
| EcoAs | EcoAs AL | EcoAs AL | 21-705-46 | 160/ 55 | 0.88 | 37.00 | EcoAs | Frame profile height 10 cm, frame profile width 23 mm. Three tie holes per panel heights 300 cm and 240 cm, two tie holes per panel heights 160 cm and 120 cm. Heights 240 cm, 160 cm and 120 cm: centered tie hole at the top and bottom for horizontal application. The frames of EA panels are made of closed steel profiles and are torsion proof. Eco As AL panels are equipped with alkus facing. All around grooves and EA assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi function profiles allow for an easy, fast and safe attachment of accessories. |
|
| EcoAs | EcoAs AL | EcoAs AL | 21-705-51 | 160/ 50 | 0.80 | 36.00 | EcoAs | Frame profile height 10 cm, frame profile width 23 mm. Three tie holes per panel heights 300 cm and 240 cm, two tie holes per panel heights 160 cm and 120 cm. Heights 240 cm, 160 cm and 120 cm: centered tie hole at the top and bottom for horizontal application. The frames of EA panels are made of closed steel profiles and are torsion proof. Eco As AL panels are equipped with alkus facing. All around grooves and EA assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi function profiles allow for an easy, fast and safe attachment of accessories. |
|
| EcoAs | EcoAs AL | EcoAs AL | 21-705-56 | 160/ 45 | 0.72 | 33.50 | EcoAs | Frame profile height 10 cm, frame profile width 23 mm. Three tie holes per panel heights 300 cm and 240 cm, two tie holes per panel heights 160 cm and 120 cm. Heights 240 cm, 160 cm and 120 cm: centered tie hole at the top and bottom for horizontal application. The frames of EA panels are made of closed steel profiles and are torsion proof. Eco As AL panels are equipped with alkus facing. All around grooves and EA assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi function profiles allow for an easy, fast and safe attachment of accessories. |
|
| EcoAs | EcoAs AL | EcoAs AL | 21-705-61 | 160/ 40 | 0.64 | 27.50 | EcoAs | Frame profile height 10 cm, frame profile width 23 mm. Three tie holes per panel heights 300 cm and 240 cm, two tie holes per panel heights 160 cm and 120 cm. Heights 240 cm, 160 cm and 120 cm: centered tie hole at the top and bottom for horizontal application. The frames of EA panels are made of closed steel profiles and are torsion proof. Eco As AL panels are equipped with alkus facing. All around grooves and EA assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi function profiles allow for an easy, fast and safe attachment of accessories. |
|
| EcoAs | EcoAs AL | EcoAs AL | 21-705-76 | 160/ 25 | 0.40 | 21.50 | EcoAs | Frame profile height 10 cm, frame profile width 23 mm. Three tie holes per panel heights 300 cm and 240 cm, two tie holes per panel heights 160 cm and 120 cm. Heights 240 cm, 160 cm and 120 cm: centered tie hole at the top and bottom for horizontal application. The frames of EA panels are made of closed steel profiles and are torsion proof. Eco As AL panels are equipped with alkus facing. All around grooves and EA assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi function profiles allow for an easy, fast and safe attachment of accessories. |
|
| EcoAs | EcoAs AL | EcoAs AL | 21-710-21 | 120/ 80 | 0.96 | 37.00 | EcoAs | Frame profile height 10 cm, frame profile width 23 mm. Three tie holes per panel heights 300 cm and 240 cm, two tie holes per panel heights 160 cm and 120 cm. Heights 240 cm, 160 cm and 120 cm: centered tie hole at the top and bottom for horizontal application. The frames of EA panels are made of closed steel profiles and are torsion proof. Eco As AL panels are equipped with alkus facing. All around grooves and EA assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi function profiles allow for an easy, fast and safe attachment of accessories. |
|
| EcoAs | EcoAs AL | EcoAs AL | 21-710-46 | 120/ 55 | 0.66 | 30.00 | EcoAs | Frame profile height 10 cm, frame profile width 23 mm. Three tie holes per panel heights 300 cm and 240 cm, two tie holes per panel heights 160 cm and 120 cm. Heights 240 cm, 160 cm and 120 cm: centered tie hole at the top and bottom for horizontal application. The frames of EA panels are made of closed steel profiles and are torsion proof. Eco As AL panels are equipped with alkus facing. All around grooves and EA assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi function profiles allow for an easy, fast and safe attachment of accessories. |
|
| EcoAs | EcoAs AL | EcoAs AL | 21-710-51 | 120/ 50 | 0.60 | 28.50 | EcoAs | Frame profile height 10 cm, frame profile width 23 mm. Three tie holes per panel heights 300 cm and 240 cm, two tie holes per panel heights 160 cm and 120 cm. Heights 240 cm, 160 cm and 120 cm: centered tie hole at the top and bottom for horizontal application. The frames of EA panels are made of closed steel profiles and are torsion proof. Eco As AL panels are equipped with alkus facing. All around grooves and EA assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi function profiles allow for an easy, fast and safe attachment of accessories. |
|
| EcoAs | EcoAs AL | EcoAs AL | 21-710-56 | 120/ 45 | 0.54 | 27.00 | EcoAs | Frame profile height 10 cm, frame profile width 23 mm. Three tie holes per panel heights 300 cm and 240 cm, two tie holes per panel heights 160 cm and 120 cm. Heights 240 cm, 160 cm and 120 cm: centered tie hole at the top and bottom for horizontal application. The frames of EA panels are made of closed steel profiles and are torsion proof. Eco As AL panels are equipped with alkus facing. All around grooves and EA assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi function profiles allow for an easy, fast and safe attachment of accessories. |
|
| EcoAs | EcoAs AL | EcoAs AL | 21-710-61 | 120/ 40 | 0.48 | 21.00 | EcoAs | Frame profile height 10 cm, frame profile width 23 mm. Three tie holes per panel heights 300 cm and 240 cm, two tie holes per panel heights 160 cm and 120 cm. Heights 240 cm, 160 cm and 120 cm: centered tie hole at the top and bottom for horizontal application. The frames of EA panels are made of closed steel profiles and are torsion proof. Eco As AL panels are equipped with alkus facing. All around grooves and EA assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi function profiles allow for an easy, fast and safe attachment of accessories. |
|
| EcoAs | EcoAs AL | EcoAs AL | 21-710-71 | 120/ 30 | 0.36 | 18.00 | EcoAs | Frame profile height 10 cm, frame profile width 23 mm. Three tie holes per panel heights 300 cm and 240 cm, two tie holes per panel heights 160 cm and 120 cm. Heights 240 cm, 160 cm and 120 cm: centered tie hole at the top and bottom for horizontal application. The frames of EA panels are made of closed steel profiles and are torsion proof. Eco As AL panels are equipped with alkus facing. All around grooves and EA assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi function profiles allow for an easy, fast and safe attachment of accessories. |
|
| EcoAs | EcoAs AL | EcoAs AL | 21-710-76 | 120/ 25 | 0.30 | 16.50 | EcoAs | Frame profile height 10 cm, frame profile width 23 mm. Three tie holes per panel heights 300 cm and 240 cm, two tie holes per panel heights 160 cm and 120 cm. Heights 240 cm, 160 cm and 120 cm: centered tie hole at the top and bottom for horizontal application. The frames of EA panels are made of closed steel profiles and are torsion proof. Eco As AL panels are equipped with alkus facing. All around grooves and EA assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi function profiles allow for an easy, fast and safe attachment of accessories. |
|
| EcoAs | EcoAs AL | EcoAs AL | 21-715-61 | 80/ 40 | 0.32 | 15.00 | EcoAs | Frame profile height 10 cm, frame profile width 23 mm. Three tie holes per panel heights 300 cm and 240 cm, two tie holes per panel heights 160 cm and 120 cm. Heights 240 cm, 160 cm and 120 cm: centered tie hole at the top and bottom for horizontal application. The frames of EA panels are made of closed steel profiles and are torsion proof. Eco As AL panels are equipped with alkus facing. All around grooves and EA assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi function profiles allow for an easy, fast and safe attachment of accessories. |
|
| EcoAs | EcoAs BP | EcoAs BP | 21-703-10 | 300/100 | 3.00 | 95.00 | EcoAs | Eco As BP panels are equipped with birch ply. |
|
| EcoAs | EcoAs BP | EcoAs BP | 21-703-20 | 300/80 | 2.40 | 81.50 | EcoAs | Eco As BP panels are equipped with birch ply. |
|
| EcoAs | EcoAs BP | EcoAs BP | 21-703-45 | 300/55 | 1.65 | 65.00 | EcoAs | Eco As BP panels are equipped with birch ply. |
|
| EcoAs | EcoAs BP | EcoAs BP | 21-703-60 | 300/40 | 1.20 | 52.00 | EcoAs | Eco As BP panels are equipped with birch ply. |
|
| EcoAs | EcoAs BP | EcoAs BP | 21-703-75 | 300/25 | 0.75 | 39.50 | EcoAs | Eco As BP panels are equipped with birch ply. |
|
| EcoAs | Foundation tape | Foundation tape 50 m | 29-307-50 | 20.00 | EcoAs | Galvanized. Hole spacing 50 mm, hole Ø 16 mm, length 50 m. Adm. tractive force 10 kN. To be cut at hole center. Serves together with the appropriate tensioner as bottom anchoring when assembling panels in horizontal position. |
|
||
| EcoAs | Tensioner EA for foundation tape | Tensioner EA for foundation tape | 29-307-75 | 1.26 | EcoAs | Galvanized. Connects the foundation tape to EcoAs or AluFix panels and serves as bottom anchoring when assembling panels in horizontal position. Two tensioners are required per anchoring position. |
|
||
| EcoAs | Trolley for foundation tape | Trolley for foundation tape | 29-307-55 | 21.80 | EcoAs | Not shown. Galvanized. Is used to transport and cut the foundation tape to length. Suitable for one roll. Pneumatic wheels. | |||
| EcoAs | EcoAs AL CP | EcoAs AL 350/90 CP | 21-704-86 | 3.15 | 133.10 | EcoAs | Column panel, steel, galvanized. Four tie holes for each panel height with unperforated alkus facing. Equipped with perforated profiles for tensioning screws M350/EA. Can be used for column formwork up to 75 cm (adjustment in 5 cm increments) and for pilasters, connections to existing walls, hinged corners, etc. |
|
|
| EcoAs | EcoAs AL CP | EcoAs AL 300/90 CP | 21-704-91 | 2.70 | 115.10 | EcoAs | Column panel, steel, galvanized. Four tie holes for each panel height with unperforated alkus facing. Equipped with perforated profiles for tensioning screws M350/EA. Can be used for column formwork up to 75 cm (adjustment in 5 cm increments) and for pilasters, connections to existing walls, hinged corners, etc. |
|
|
| EcoAs | EcoAs AL CP | EcoAs AL 150/90 CP | 21-704-96 | 1.35 | 65.80 | EcoAs | Column panel, steel, galvanized. Four tie holes for each panel height with unperforated alkus facing. Equipped with perforated profiles for tensioning screws M350/EA. Can be used for column formwork up to 75 cm (adjustment in 5 cm increments) and for pilasters, connections to existing walls, hinged corners, etc. |
|
|
| EcoAs | EcoAs AL CP | EcoAs BP 350/90 CP | 21-704-85 | 3.15 | 129.60 | EcoAs | Column panel, steel, galvanized. Four tie holes for each panel height with unperforated alkus facing. Equipped with perforated profiles for tensioning screws M350/EA. Can be used for column formwork up to 75 cm (adjustment in 5 cm increments) and for pilasters, connections to existing walls, hinged corners, etc. |
|
|
| EcoAs | EcoAs AL CP | EcoAs BP 300/90 CP | 21-704-90 | 2.70 | 112.10 | EcoAs | Column panel, steel, galvanized. Four tie holes for each panel height with unperforated alkus facing. Equipped with perforated profiles for tensioning screws M350/EA. Can be used for column formwork up to 75 cm (adjustment in 5 cm increments) and for pilasters, connections to existing walls, hinged corners, etc. |
|
|
| EcoAs | EcoAs AL CP | EcoAs BP 150/90 CP | 21-704-95 | 1.35 | 64.30 | EcoAs | Column panel, steel, galvanized. Four tie holes for each panel height with unperforated alkus facing. Equipped with perforated profiles for tensioning screws M350/EA. Can be used for column formwork up to 75 cm (adjustment in 5 cm increments) and for pilasters, connections to existing walls, hinged corners, etc. |
|
|
| EcoAs | Tension screw M350/EA | Tension screw M350/EA | 29-402-98 | 0.89 | EcoAs | Galvanized. Connects column panels. A flange nut 100 or an articulated flange nut 15/120 is also required. |
|
||
| EcoAs | EcoAs AL MPP | EcoAs AL-MPP | 21-720-51 | 120/60 | 0.72 | 33.50 | EcoAs | EA-multipurose panel with perforated profiles to be used as column formwork or to concrete pilasters, stop ends, connections to existing walls, corner configurations, etc. Is used in connection with stop end fixture 23/40. |
|
| EcoAs | EcoAs AL-IC | EcoAs AL-IC | 21-724-10 | 300/25 | 1.50 | 31.30 | EcoAs | EA inside corner Alu(minium) frame with high-quality annealed plastic coating. All-plastic facing. Aluminium frame with tie holes. For 90° corners, side length 25 cm. |
|
| EcoAs | EcoAs AL-IC | EcoAs AL-IC | 21-724-20 | 240/25 | 1.20 | 25.20 | EcoAs | EA inside corner Alu(minium) frame with high-quality annealed plastic coating. All-plastic facing. Aluminium frame with tie holes. For 90° corners, side length 25 cm. |
|
| EcoAs | EcoAs AL-IC | EcoAs AL-IC | 21-724-30 | 160/25 | 0.80 | 17.30 | EcoAs | EA inside corner Alu(minium) frame with high-quality annealed plastic coating. All-plastic facing. Aluminium frame with tie holes. For 90° corners, side length 25 cm. |
|
| EcoAs | EcoAs AL-IC | EcoAs AL-IC | 21-724-40 | 120/25 | 0.60 | 13.40 | EcoAs | EA inside corner Alu(minium) frame with high-quality annealed plastic coating. All-plastic facing. Aluminium frame with tie holes. For 90° corners, side length 25 cm. |
|
| EcoAs | EcoAs OC | EcoAs OC | 21-725-75 | 300 | 0.30 | 15.60 | EcoAs | EA outside corner, Aluminium with high-quality annealed plastic coating. Facing 5 cm wide on both sides, integrated chamfer strip. Provides together with EA panels and EA assembly locks a fast and tight outside corner assembly for 90° angles. |
|
| EcoAs | EcoAs OC | EcoAs OC | 21-725-85 | 240 | 0.24 | 13.00 | EcoAs | EA outside corner, Aluminium with high-quality annealed plastic coating. Facing 5 cm wide on both sides, integrated chamfer strip. Provides together with EA panels and EA assembly locks a fast and tight outside corner assembly for 90° angles. |
|
| EcoAs | EcoAs OC | EcoAs OC | 21-725-90 | 160 | 0.16 | 9.00 | EcoAs | EA outside corner, Aluminium with high-quality annealed plastic coating. Facing 5 cm wide on both sides, integrated chamfer strip. Provides together with EA panels and EA assembly locks a fast and tight outside corner assembly for 90° angles. |
|
| EcoAs | EcoAs OC | EcoAs OC | 21-725-95 | 120 | 0.12 | 6.50 | EcoAs | EA outside corner, Aluminium with high-quality annealed plastic coating. Facing 5 cm wide on both sides, integrated chamfer strip. Provides together with EA panels and EA assembly locks a fast and tight outside corner assembly for 90° angles. |
|
| EcoAs | EcoAs HIC | EcoAs HIC | 21-726-30 | 240/30 | 1.44 | 57.00 | EcoAs | EA hinged inside corner, steel construction with steel sheeting, primed and cavity-sealed. Side length 30 cm. Adjustable angle 60° to 180°. |
|
| EcoAs | EcoAs HIC | EcoAs HIC | 21-726-40 | 120/30 | 0.72 | 29.00 | EcoAs | EA hinged inside corner, steel construction with steel sheeting, primed and cavity-sealed. Side length 30 cm. Adjustable angle 60° to 180°. |
|
| EcoAs | EcoAs HOC | EcoAs HOC | 21-726-50 | 240 | 0.36 | 40.00 | EcoAs | EA hinged outside corner, steel construction with steel sheeting, primed and cavity-sealed. Side length 7.5 cm. Adjustable angle 60° to 180°. |
|
| EcoAs | EcoAs HOC | EcoAs HOC | 21-726-60 | 120 | 0.18 | 20.20 | EcoAs | EA hinged outside corner, steel construction with steel sheeting, primed and cavity-sealed. Side length 7.5 cm. Adjustable angle 60° to 180°. |
|
| EcoAs | EA assembly lock | EA-assembly lock | 29-205-50 | 1.50 | EcoAs | Galvanized. Tightly connects and aligns EA panels. Clamping length 4.6 cm. |
|
||
| EcoAs | Uni-assembly lock | Uni-assembly lock 22 | 29-400-85 | 3.60 | EcoAs | Galvanized. For stepless compensation. Clamping length 22 cm or 28 cm. |
|
||
| EcoAs | Uni-assembly lock | Uni-assembly lock 28 | 29-400-90 | 3.90 | EcoAs | Galvanized. For stepless compensation. Clamping length 22 cm or 28 cm. |
|
||
| EcoAs | RS-assembly lock | RS-assembly lock | 23-807-70 | 4.70 | EcoAs | Galvanized, For stepless length compensation. Clamping length is 11.9 to 20.5 cm for stepless compensation. |
|
||
| EcoAs | Flange screw | Flange screw 18 | 29-401-10 | 1.10 | EcoAs | Galvanized. DW thread Ø 15 mm. Is used to attach accessories, e.g. alignment rails, brace frames, push-pull props, etc. Length of thread 18 cm or 27 cm. |
|
||
| EcoAs | Flange screw | Flange screw 28 | 29-401-12 | 1.23 | EcoAs | Galvanized. DW thread Ø 15 mm. Is used to attach accessories, e.g. alignment rails, brace frames, push-pull props, etc. Length of thread 18 cm or 27 cm. |
|
||
| EcoAs | EA steel filler | EA-steel filler 240/5 | 21-726-00 | 0.12 | 13.00 | EcoAs | Completely made of steel, primed and cavity-sealed, with tie holes. For length adjustment of 5 cm, particularly in corners. For the required quantity of Uni-assembly locks see Technical Instruction Manual EcoAs. |
|
|
| EcoAs | EA steel filler | EA-steel filler 120/5 | 21-726-10 | 0.06 | 6.50 | EcoAs | Completely made of steel, primed and cavity-sealed, with tie holes. For length adjustment of 5 cm, particularly in corners. For the required quantity of Uni-assembly locks see Technical Instruction Manual EcoAs. |
|
|
| EcoAs | EA compensation plate | EA-compensation plate 120/20 | 21-726-20 | 0.24 | 11.80 | EcoAs | Steel construction with steel sheeting, primed and cavity-sealed. Is used to compensate gaps of 6 to 20 cm and attached to panels with 2 EA assembly locks. Alignment rails must be used to bridge and align the panels with the compensation plate. |
|
|
| EcoAs | Dismantling auxiliary 120 | Dismantling auxiliary 120 | 29-306-20 | 7.20 | EcoAs | 10 cm wide, 120 cm high. Diagonally divided timber filler. Permits easy stripping in restricted areas such as shafts and staircases. Two Uni-assembly locks are required per dismantling auxiliary. Alignment rails must be used for reinforcement. Delivery and weight by pairs. |
|
||
| EcoAs | Stop end bracket | Stop end bracket 23/40 | 29-105-45 | 12.20 | EcoAs | Galvanized. Is used to form stop ends. Stop end bracket 40/60 for wall thickness up to 40 cm and profile widths of 40 and 60 mm. Stop end bracket 2.5‘ - 60/23 for wall thickness up 75 cm (2.5‘) and profile widths of 23 mm (EcoAs) and 60 mm. |
|
||
| EcoAs | Stop end bracket | Stop end bracket 2.5' - 60/23 | 29-105-60 | 20.00 | EcoAs | Galvanized. Is used to form stop ends. Stop end bracket 40/60 for wall thickness up to 40 cm and profile widths of 40 and 60 mm. Stop end bracket 2.5‘ - 60/23 for wall thickness up 75 cm (2.5‘) and profile widths of 23 mm (EcoAs) and 60 mm. |
|
||
| EcoAs | Timber fixture | Timber fixture | 29-105-90 | 1.50 | EcoAs | Galvanized. Is used to attach 10 to 12 cm high squared timbers when bracing panel joints for crane ganging or when bridging problem areas. |
|
||
| EcoAs | Stop end fixture 23/40 | Stop end fixture 23/40 (yellow) | 29-402-85 | 3.00 | EcoAs | Yellow chromated. Is used together with the EcoAs or StarTec multi-purpose panel to form outside corners and abutments. Is suited for the frame profiles of EcoAs and AluFix (23 mm) and AluStar/StarTec (40 mm). A flange nut 100 or an articulated flange nut 15/120 is also required. |
|
||
| EcoAs | Plug D20 | Plug D20 | 29-902-63 | 0.20 | EcoAs | Is used to close unused tie holes (AluFix, EcoAs, AluStar and StarTec). |
|
||
| EcoAs | Plug D20 | Plug D20 without imprint | 29-902-62 | 0.20 | EcoAs | Is used to close unused tie holes (AluFix, EcoAs, AluStar and StarTec). |
|
||
| EcoAs | AS alignment rail | AS-alignment rail 50, galv. | 29-201-73 | 5.20 | EcoAs | Galvanized. Is used to brace panel joints for crane ganging, bridge problem areas and brace compensation areas. Is attached to the formwork with flange screws. |
|
||
| EcoAs | AS alignment rail | AS-alignment rail 125, galv. | 29-201-75 | 10.50 | EcoAs | Galvanized. Is used to brace panel joints for crane ganging, bridge problem areas and brace compensation areas. Is attached to the formwork with flange screws. |
|
||
| EcoAs | AS alignment rail | AS-alignment rail 200, galv. | 29-201-80 | 19.00 | EcoAs | Galvanized. Is used to brace panel joints for crane ganging, bridge problem areas and brace compensation areas. Is attached to the formwork with flange screws. |
|
||
| EcoAs | Tie rod DW 15/90 | Tie rod DW 15/90 | 29-900-80 | 1.25 | EcoAs | Uncoated, not weldable. DW thread Ø 15 mm. Is used to tie panels of double-sided formwork. Adm. load capacity 90 kN (DIN 18216). |
|
||
| EcoAs | Tie wrench DW15/DW20 | Tie wrench DW15/DW20 | 29-901-39 | 4.50 | EcoAs | Made of steel, galvanized. Used to screw in, screw out and hold tie rods DW15 and DW20; length 400 mm. |
|
||
| EcoAs | Plastic tube | Plastic tube D22/200 | 29-902-30 | 8.75 | EcoAs | Plastic spacer tube for tie holes. Two cones are also required per tie hole. D22/200: internal Ø 22 mm, external Ø 28 mm, standard length 2.00 m. D32/36: internal Ø 32 mm, external Ø 36 mm, standard length 2.00 m. |
|
||
| EcoAs | Cone for plastic tube | Cone for plastic tube D22/10 (10 mm covering) | 29-902-40 | 13.00 | EcoAs | Available with 10 mm or 30 mm covering. |
|
||
| EcoAs | Cone for plastic tube | Cone for plastic tube D22/30 (30 mm covering) | 29-902-50 | 3.25 | EcoAs | Available with 10 mm or 30 mm covering. |
|
||
| EcoAs | Flange nut 100 | Flange nut 100 (SW 27, forged) | 29-900-20 | 0.70 | EcoAs | Forged, galvanized. For DW tie rods with 15 mm Ø. Plate Ø 100 mm, SW 27. Admissible load capacity 90 kN (DIN 18216). |
|
||
| EcoAs | Articulated flange nut 15/120 | Articulated flange nut 15/120 (SW 27) | 29-900-10 | 1.81 | EcoAs | Forged, galvanized. DIN 18216. DW thread Ø 15 mm, plate Ø 120 mm, max. inclination 10°, SW 27. Max. load capacity 90 kN. Reduces wear of panel coating. |
|
||
| EcoAs | Spanner SW 27 | Spanner SW 27 | 29-800-10 | 1.80 | EcoAs | Inset yellow chromated. Spanner width (SW) 27 mm. Is used to tighten and loosen flange nuts 100, articulated flange nuts 15/120 and flange screws. |
|
||
| EcoAs | Drive nut 60 | Drive nut 60 | 29-900-23 | 0.50 | EcoAs | Galvanized. DW thread Ø 15 mm, plate Ø 60 mm. Adm. load capacity 90 kN (DIN 18216). Is used to tie the formwork to the ground or to a wall connection. |
|
||
| EcoAs | Tie claw 23 | Tie claw 23 | 29-901-44 | 0.17 | EcoAs | Galvanized. Permits tieing (with tie rod DW 15 and flange nut 100) directly above or beside EcoAs and AluFix panels. |
|
||
| EcoAs | Crane hook | EA/AF-crane hook | 29-103-05 | 6.00 | EcoAs | Coated. Is used to move and crane-gang AluFix and EcoAs panels. Self-locking. Load capacity 6 kN (600 kg). Always two crane hooks required per gang. Refer to the crane hook Operating Instructions for application and safety test. |
|
||
| EcoAs | Brace frame 250 | Brace frame 250 with formwork-prop connector | 29-109-20 | 31.50 | EcoAs | Galvanized. Available with formwork-prop connector. Is used to align and brace the formwork. Consists of a push-pull prop R 250 (190‑320 cm), a brace SRL 120 (90‑150 cm) and a double-jointed footplate.The formwork-prop connectors are attached to the formwork with flange screws 18. |
|
||
| EcoAs | Formwork-prop connector | Formwork-prop connector | 29-804-85 | 1.65 | EcoAs | Galvanized. Delivery includes head bolt 16/90 and cotter pin 4. Is used to connect braces, brace frames and push-pull props (max. Ø 48 mm) to the multi-function profile with a flange screw 18. |
|
||
| EcoAs | Walkway bracket | Walkway bracket 90 (yellow), galv. | 29-106-00 | 10.30 | EcoAs | Galvanized, yellow, pluggable. Is used as working and safety scaffold. Is attached to the multi-function profile and secured to the multi-function profile below with a flange screw 18. The planking can be mounted to the brackets. Working width approx. 90 cm. MEVA Guard-railing post is also required. Bracket spacing depends on type of planking (DIN 4420). |
|
||
| EcoAs | Side railing | Side railing 90/100, galv. | 29-108-20 | 12.30 | EcoAs | Galvanized. Is plugged into the walkway bracket. |
|
||
| EcoAs | Side railing | Side railing 125/100, galv. | 29-108-30 | 13.80 | EcoAs | Galvanized. Is plugged into the walkway bracket. |
|
||
| EcoAs | Guard-railing post | Guard-railing post 100 | 29-106-75 | 3.70 | EcoAs | Galvanized. Is plugged into the walkway bracket. |
|
||
| EcoAs | Guard-railing post | Guard-railing post 140 | 29-106-85 | 4.70 | EcoAs | Galvanized. Is plugged into the walkway bracket. |
|
||
| EcoAs | Guard-railing post 48 | Guard-railing post 48/120 (UK) | 29-106-80 | 5.50 | EcoAs | Galvanized. With manifold to be plugged into the walkway bracket and with 48 mm Ø tube to attach scaffold couplers. |
|
||
| EcoAs | Guard-railing post 48 | Guard-railing post 48/134 | 29-920-80 | 5.45 | EcoAs | Galvanized. With manifold to be plugged into the walkway bracket and with 48 mm Ø tube to attach scaffold couplers. |
|
||
| EcoAs | Tilting bracket 23 | Tilting bracket 23 | 29-920-84 | 4.77 | EcoAs | Galvanised. Used to attach MEVA guardrailing posts to create a fall protection system. It can be set up vertically to facilitate the installation of safety meshes or railing boards or inclined by 15° to create a larger working area. Secured with a wedge to the frame profile of 23 mm. |
|
||
| EcoAs | Scaffold tube | Scaffold tube 48/200 | 29-412-23 | 9.40 | EcoAs | Galvanized. Is used as handrail in combination with guard-railing post 48. |
|
||
| EcoAs | Scaffold tube | Scaffold tube 48/300 | 29-412-26 | 14.10 | EcoAs | Galvanized. Is used as handrail in combination with guard-railing post 48. |
|
||
| EcoAs | Scaffold tube | Scaffold tube 48/400 | 29-412-27 | 18.80 | EcoAs | Galvanized. Is used as handrail in combination with guard-railing post 48. |
|
||
| EcoAs | Scaffold tube | Scaffold tube 48/500 | 29-412-25 | 23.50 | EcoAs | Galvanized. Is used as handrail in combination with guard-railing post 48. |
|
||
| EcoAs | Scaffold tube | Scaffold tube 48/600 | 29-412-28 | 28.20 | EcoAs | Galvanized. Is used as handrail in combination with guard-railing post 48. |
|
||
| EcoAs | Swivel-joint coupler 48/48 | Swivel-joint coupler 48/48 | 29-412-52 | 1.20 | EcoAs | Galvanized. Connects 2 scaffold tubes with 48.3 mm Ø at any angle. |
|
||
| EcoAs | Transport angle 10 | Transport angle 10 | 29-305-10 | 16.00 | EcoAs | Is used to stack and transport 5 to 12 EcoAs or AluFix panels. Distance between holes 10 cm. We recommend using 2 foldable angles and 2 angles of the rigid type per stack. Max. load capacity is 10 kN per angle. For safety reasons consider 20 kN as maximum capacity for the whole stack. |
|
||
| EcoAs | Transport angle 10 | Transport angle 10, rigid type | 29-305-15 | 10.40 | EcoAs | Is used to stack and transport 5 to 12 EcoAs or AluFix panels. Distance between holes 10 cm. We recommend using 2 foldable angles and 2 angles of the rigid type per stack. Max. load capacity is 10 kN per angle. For safety reasons consider 20 kN as maximum capacity for the whole stack. |
|
||
| EcoAs | Safety plug AS/ST stacks, black | Safety plug AS/ST stacks, black | 40-131-10 | 19.00 | EcoAs | Plastic, black. Secures stacked AluFix, EcoAs, AluStar and StarTec panels. |
|
||
| AluFix | AluFix AL | AluFix AL | 22-133-10 | 350/90 | 3.15 | 62.48 | AluFix | Construction height 10 cm, frame profile width 23 mm. Four tie holes per panel height 350 cm, three tie holes per panel height 300, 270 and 250 cm, two tie holes per panel height 150 and 135 cm. The frames of the AF panels are made of closed 3-chamber aluminium profiles (double groove) or 2-chamber aluminium profiles (single groove) and are torsion-proof. They are easy to clean thanks to their high-quality annealed powder coating. The AluFix AL panels are equipped with alkus facing. All-around grooves and EA assembly locks (double groove) or E assembly locks (single groove) guarantee a tight and perfectly aligned panel connection. Anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories. |
|
| AluFix | AluFix AL | AluFix AL | 22-133-25 | 350/75 | 2.63 | 53.69 | AluFix | Construction height 10 cm, frame profile width 23 mm. Four tie holes per panel height 350 cm, three tie holes per panel height 300, 270 and 250 cm, two tie holes per panel height 150 and 135 cm. The frames of the AF panels are made of closed 3-chamber aluminium profiles (double groove) or 2-chamber aluminium profiles (single groove) and are torsion-proof. They are easy to clean thanks to their high-quality annealed powder coating. The AluFix AL panels are equipped with alkus facing. All-around grooves and EA assembly locks (double groove) or E assembly locks (single groove) guarantee a tight and perfectly aligned panel connection. Anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories. |
|
| AluFix | AluFix AL | AluFix AL | 22-133-45 | 350/55 | 1.93 | 41.41 | AluFix | Construction height 10 cm, frame profile width 23 mm. Four tie holes per panel height 350 cm, three tie holes per panel height 300, 270 and 250 cm, two tie holes per panel height 150 and 135 cm. The frames of the AF panels are made of closed 3-chamber aluminium profiles (double groove) or 2-chamber aluminium profiles (single groove) and are torsion-proof. They are easy to clean thanks to their high-quality annealed powder coating. The AluFix AL panels are equipped with alkus facing. All-around grooves and EA assembly locks (double groove) or E assembly locks (single groove) guarantee a tight and perfectly aligned panel connection. Anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories. |
|
| AluFix | AluFix AL | AluFix AL | 22-133-60 | 350/40 | 1.40 | 32.68 | AluFix | Construction height 10 cm, frame profile width 23 mm. Four tie holes per panel height 350 cm, three tie holes per panel height 300, 270 and 250 cm, two tie holes per panel height 150 and 135 cm. The frames of the AF panels are made of closed 3-chamber aluminium profiles (double groove) or 2-chamber aluminium profiles (single groove) and are torsion-proof. They are easy to clean thanks to their high-quality annealed powder coating. The AluFix AL panels are equipped with alkus facing. All-around grooves and EA assembly locks (double groove) or E assembly locks (single groove) guarantee a tight and perfectly aligned panel connection. Anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories. |
|
| AluFix | AluFix AL | AluFix AL | 22-133-75 | 350/25 | 0.88 | 24.21 | AluFix | Construction height 10 cm, frame profile width 23 mm. Four tie holes per panel height 350 cm, three tie holes per panel height 300, 270 and 250 cm, two tie holes per panel height 150 and 135 cm. The frames of the AF panels are made of closed 3-chamber aluminium profiles (double groove) or 2-chamber aluminium profiles (single groove) and are torsion-proof. They are easy to clean thanks to their high-quality annealed powder coating. The AluFix AL panels are equipped with alkus facing. All-around grooves and EA assembly locks (double groove) or E assembly locks (single groove) guarantee a tight and perfectly aligned panel connection. Anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories. |
|
| AluFix | AluFix AL | AluFix AL | 22-134-25 | 300/75 | 2.25 | 45.95 | AluFix | Construction height 10 cm, frame profile width 23 mm. Four tie holes per panel height 350 cm, three tie holes per panel height 300, 270 and 250 cm, two tie holes per panel height 150 and 135 cm. The frames of the AF panels are made of closed 3-chamber aluminium profiles (double groove) or 2-chamber aluminium profiles (single groove) and are torsion-proof. They are easy to clean thanks to their high-quality annealed powder coating. The AluFix AL panels are equipped with alkus facing. All-around grooves and EA assembly locks (double groove) or E assembly locks (single groove) guarantee a tight and perfectly aligned panel connection. Anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories. |
|
| AluFix | AluFix AL | AluFix AL | 22-134-45 | 300/55 | 1.65 | 36.75 | AluFix | Construction height 10 cm, frame profile width 23 mm. Four tie holes per panel height 350 cm, three tie holes per panel height 300, 270 and 250 cm, two tie holes per panel height 150 and 135 cm. The frames of the AF panels are made of closed 3-chamber aluminium profiles (double groove) or 2-chamber aluminium profiles (single groove) and are torsion-proof. They are easy to clean thanks to their high-quality annealed powder coating. The AluFix AL panels are equipped with alkus facing. All-around grooves and EA assembly locks (double groove) or E assembly locks (single groove) guarantee a tight and perfectly aligned panel connection. Anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories. |
|
| AluFix | AluFix AL | AluFix AL | 22-134-60 | 300/40 | 1.20 | 29.59 | AluFix | Construction height 10 cm, frame profile width 23 mm. Four tie holes per panel height 350 cm, three tie holes per panel height 300, 270 and 250 cm, two tie holes per panel height 150 and 135 cm. The frames of the AF panels are made of closed 3-chamber aluminium profiles (double groove) or 2-chamber aluminium profiles (single groove) and are torsion-proof. They are easy to clean thanks to their high-quality annealed powder coating. The AluFix AL panels are equipped with alkus facing. All-around grooves and EA assembly locks (double groove) or E assembly locks (single groove) guarantee a tight and perfectly aligned panel connection. Anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories. |
|
| AluFix | AluFix AL | AluFix AL | 22-134-75 | 300/25 | 0.75 | 21.37 | AluFix | Construction height 10 cm, frame profile width 23 mm. Four tie holes per panel height 350 cm, three tie holes per panel height 300, 270 and 250 cm, two tie holes per panel height 150 and 135 cm. The frames of the AF panels are made of closed 3-chamber aluminium profiles (double groove) or 2-chamber aluminium profiles (single groove) and are torsion-proof. They are easy to clean thanks to their high-quality annealed powder coating. The AluFix AL panels are equipped with alkus facing. All-around grooves and EA assembly locks (double groove) or E assembly locks (single groove) guarantee a tight and perfectly aligned panel connection. Anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories. |
|
| AluFix | AluFix AL | AluFix AL | 22-137-10 | 270/90 | 2.43 | 47.70 | AluFix | Construction height 10 cm, frame profile width 23 mm. Four tie holes per panel height 350 cm, three tie holes per panel height 300, 270 and 250 cm, two tie holes per panel height 150 and 135 cm. The frames of the AF panels are made of closed 3-chamber aluminium profiles (double groove) or 2-chamber aluminium profiles (single groove) and are torsion-proof. They are easy to clean thanks to their high-quality annealed powder coating. The AluFix AL panels are equipped with alkus facing. All-around grooves and EA assembly locks (double groove) or E assembly locks (single groove) guarantee a tight and perfectly aligned panel connection. Anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories. |
|
| AluFix | AluFix AL | AluFix AL | 22-137-25 | 270/75 | 2.02 | 41.30 | AluFix | Construction height 10 cm, frame profile width 23 mm. Four tie holes per panel height 350 cm, three tie holes per panel height 300, 270 and 250 cm, two tie holes per panel height 150 and 135 cm. The frames of the AF panels are made of closed 3-chamber aluminium profiles (double groove) or 2-chamber aluminium profiles (single groove) and are torsion-proof. They are easy to clean thanks to their high-quality annealed powder coating. The AluFix AL panels are equipped with alkus facing. All-around grooves and EA assembly locks (double groove) or E assembly locks (single groove) guarantee a tight and perfectly aligned panel connection. Anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories. |
|
| AluFix | AluFix AL | AluFix AL | 22-137-45 | 270/55 | 1.49 | 31.70 | AluFix | Construction height 10 cm, frame profile width 23 mm. Four tie holes per panel height 350 cm, three tie holes per panel height 300, 270 and 250 cm, two tie holes per panel height 150 and 135 cm. The frames of the AF panels are made of closed 3-chamber aluminium profiles (double groove) or 2-chamber aluminium profiles (single groove) and are torsion-proof. They are easy to clean thanks to their high-quality annealed powder coating. The AluFix AL panels are equipped with alkus facing. All-around grooves and EA assembly locks (double groove) or E assembly locks (single groove) guarantee a tight and perfectly aligned panel connection. Anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories. |
|
| AluFix | AluFix AL | AluFix AL | 22-137-60 | 270/40 | 1.08 | 25.00 | AluFix | Construction height 10 cm, frame profile width 23 mm. Four tie holes per panel height 350 cm, three tie holes per panel height 300, 270 and 250 cm, two tie holes per panel height 150 and 135 cm. The frames of the AF panels are made of closed 3-chamber aluminium profiles (double groove) or 2-chamber aluminium profiles (single groove) and are torsion-proof. They are easy to clean thanks to their high-quality annealed powder coating. The AluFix AL panels are equipped with alkus facing. All-around grooves and EA assembly locks (double groove) or E assembly locks (single groove) guarantee a tight and perfectly aligned panel connection. Anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories. |
|
| AluFix | AluFix AL | AluFix AL | 22-137-75 | 270/25 | 0.68 | 18.60 | AluFix | Construction height 10 cm, frame profile width 23 mm. Four tie holes per panel height 350 cm, three tie holes per panel height 300, 270 and 250 cm, two tie holes per panel height 150 and 135 cm. The frames of the AF panels are made of closed 3-chamber aluminium profiles (double groove) or 2-chamber aluminium profiles (single groove) and are torsion-proof. They are easy to clean thanks to their high-quality annealed powder coating. The AluFix AL panels are equipped with alkus facing. All-around grooves and EA assembly locks (double groove) or E assembly locks (single groove) guarantee a tight and perfectly aligned panel connection. Anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories. |
|
| AluFix | AluFix AL | AluFix AL | 22-138-10 | 250/90 | 2.25 | 45.20 | AluFix | Construction height 10 cm, frame profile width 23 mm. Four tie holes per panel height 350 cm, three tie holes per panel height 300, 270 and 250 cm, two tie holes per panel height 150 and 135 cm. The frames of the AF panels are made of closed 3-chamber aluminium profiles (double groove) or 2-chamber aluminium profiles (single groove) and are torsion-proof. They are easy to clean thanks to their high-quality annealed powder coating. The AluFix AL panels are equipped with alkus facing. All-around grooves and EA assembly locks (double groove) or E assembly locks (single groove) guarantee a tight and perfectly aligned panel connection. Anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories. |
|
| AluFix | AluFix AL | AluFix AL | 22-138-25 | 250/75 | 1.88 | 38.11 | AluFix | Construction height 10 cm, frame profile width 23 mm. Four tie holes per panel height 350 cm, three tie holes per panel height 300, 270 and 250 cm, two tie holes per panel height 150 and 135 cm. The frames of the AF panels are made of closed 3-chamber aluminium profiles (double groove) or 2-chamber aluminium profiles (single groove) and are torsion-proof. They are easy to clean thanks to their high-quality annealed powder coating. The AluFix AL panels are equipped with alkus facing. All-around grooves and EA assembly locks (double groove) or E assembly locks (single groove) guarantee a tight and perfectly aligned panel connection. Anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories. |
|
| AluFix | AluFix AL | AluFix AL | 22-138-45 | 250/55 | 1.38 | 29.93 | AluFix | Construction height 10 cm, frame profile width 23 mm. Four tie holes per panel height 350 cm, three tie holes per panel height 300, 270 and 250 cm, two tie holes per panel height 150 and 135 cm. The frames of the AF panels are made of closed 3-chamber aluminium profiles (double groove) or 2-chamber aluminium profiles (single groove) and are torsion-proof. They are easy to clean thanks to their high-quality annealed powder coating. The AluFix AL panels are equipped with alkus facing. All-around grooves and EA assembly locks (double groove) or E assembly locks (single groove) guarantee a tight and perfectly aligned panel connection. Anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories. |
|
| AluFix | AluFix AL | AluFix AL | 22-138-60 | 250/40 | 1.55 | 23.56 | AluFix | Construction height 10 cm, frame profile width 23 mm. Four tie holes per panel height 350 cm, three tie holes per panel height 300, 270 and 250 cm, two tie holes per panel height 150 and 135 cm. The frames of the AF panels are made of closed 3-chamber aluminium profiles (double groove) or 2-chamber aluminium profiles (single groove) and are torsion-proof. They are easy to clean thanks to their high-quality annealed powder coating. The AluFix AL panels are equipped with alkus facing. All-around grooves and EA assembly locks (double groove) or E assembly locks (single groove) guarantee a tight and perfectly aligned panel connection. Anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories. |
|
| AluFix | AluFix AL | AluFix AL | 22-138-75 | 250/25 | 0.63 | 17.44 | AluFix | Construction height 10 cm, frame profile width 23 mm. Four tie holes per panel height 350 cm, three tie holes per panel height 300, 270 and 250 cm, two tie holes per panel height 150 and 135 cm. The frames of the AF panels are made of closed 3-chamber aluminium profiles (double groove) or 2-chamber aluminium profiles (single groove) and are torsion-proof. They are easy to clean thanks to their high-quality annealed powder coating. The AluFix AL panels are equipped with alkus facing. All-around grooves and EA assembly locks (double groove) or E assembly locks (single groove) guarantee a tight and perfectly aligned panel connection. Anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories. |
|
| AluFix | AluFix AL | AluFix AL | 22-135-10 | 150/90 | 1.35 | 27.41 | AluFix | Construction height 10 cm, frame profile width 23 mm. Four tie holes per panel height 350 cm, three tie holes per panel height 300, 270 and 250 cm, two tie holes per panel height 150 and 135 cm. The frames of the AF panels are made of closed 3-chamber aluminium profiles (double groove) or 2-chamber aluminium profiles (single groove) and are torsion-proof. They are easy to clean thanks to their high-quality annealed powder coating. The AluFix AL panels are equipped with alkus facing. All-around grooves and EA assembly locks (double groove) or E assembly locks (single groove) guarantee a tight and perfectly aligned panel connection. Anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories. |
|
| AluFix | AluFix AL | AluFix AL | 22-135-25 | 150/75 | 1.13 | 23.30 | AluFix | Construction height 10 cm, frame profile width 23 mm. Four tie holes per panel height 350 cm, three tie holes per panel height 300, 270 and 250 cm, two tie holes per panel height 150 and 135 cm. The frames of the AF panels are made of closed 3-chamber aluminium profiles (double groove) or 2-chamber aluminium profiles (single groove) and are torsion-proof. They are easy to clean thanks to their high-quality annealed powder coating. The AluFix AL panels are equipped with alkus facing. All-around grooves and EA assembly locks (double groove) or E assembly locks (single groove) guarantee a tight and perfectly aligned panel connection. Anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories. |
|
| AluFix | AluFix AL | AluFix AL | 22-135-45 | 150/55 | 0.95 | 18.58 | AluFix | Construction height 10 cm, frame profile width 23 mm. Four tie holes per panel height 350 cm, three tie holes per panel height 300, 270 and 250 cm, two tie holes per panel height 150 and 135 cm. The frames of the AF panels are made of closed 3-chamber aluminium profiles (double groove) or 2-chamber aluminium profiles (single groove) and are torsion-proof. They are easy to clean thanks to their high-quality annealed powder coating. The AluFix AL panels are equipped with alkus facing. All-around grooves and EA assembly locks (double groove) or E assembly locks (single groove) guarantee a tight and perfectly aligned panel connection. Anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories. |
|
| AluFix | AluFix AL | AluFix AL | 22-135-60 | 150/40 | 0.60 | 14.89 | AluFix | Construction height 10 cm, frame profile width 23 mm. Four tie holes per panel height 350 cm, three tie holes per panel height 300, 270 and 250 cm, two tie holes per panel height 150 and 135 cm. The frames of the AF panels are made of closed 3-chamber aluminium profiles (double groove) or 2-chamber aluminium profiles (single groove) and are torsion-proof. They are easy to clean thanks to their high-quality annealed powder coating. The AluFix AL panels are equipped with alkus facing. All-around grooves and EA assembly locks (double groove) or E assembly locks (single groove) guarantee a tight and perfectly aligned panel connection. Anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories. |
|
| AluFix | AluFix AL | AluFix AL | 22-135-75 | 150/25 | 0.38 | 10.10 | AluFix | Construction height 10 cm, frame profile width 23 mm. Four tie holes per panel height 350 cm, three tie holes per panel height 300, 270 and 250 cm, two tie holes per panel height 150 and 135 cm. The frames of the AF panels are made of closed 3-chamber aluminium profiles (double groove) or 2-chamber aluminium profiles (single groove) and are torsion-proof. They are easy to clean thanks to their high-quality annealed powder coating. The AluFix AL panels are equipped with alkus facing. All-around grooves and EA assembly locks (double groove) or E assembly locks (single groove) guarantee a tight and perfectly aligned panel connection. Anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories. |
|
| AluFix | AluFix AL | AluFix AL | 22-139-10 | 135/90 | 1.22 | 24.05 | AluFix | Construction height 10 cm, frame profile width 23 mm. Four tie holes per panel height 350 cm, three tie holes per panel height 300, 270 and 250 cm, two tie holes per panel height 150 and 135 cm. The frames of the AF panels are made of closed 3-chamber aluminium profiles (double groove) or 2-chamber aluminium profiles (single groove) and are torsion-proof. They are easy to clean thanks to their high-quality annealed powder coating. The AluFix AL panels are equipped with alkus facing. All-around grooves and EA assembly locks (double groove) or E assembly locks (single groove) guarantee a tight and perfectly aligned panel connection. Anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories. |
|
| AluFix | AluFix AL | AluFix AL | 22-139-25 | 135/75 | 1.01 | 20.72 | AluFix | Construction height 10 cm, frame profile width 23 mm. Four tie holes per panel height 350 cm, three tie holes per panel height 300, 270 and 250 cm, two tie holes per panel height 150 and 135 cm. The frames of the AF panels are made of closed 3-chamber aluminium profiles (double groove) or 2-chamber aluminium profiles (single groove) and are torsion-proof. They are easy to clean thanks to their high-quality annealed powder coating. The AluFix AL panels are equipped with alkus facing. All-around grooves and EA assembly locks (double groove) or E assembly locks (single groove) guarantee a tight and perfectly aligned panel connection. Anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories. |
|
| AluFix | AluFix AL | AluFix AL | 22-139-45 | 135/55 | 0.74 | 16.31 | AluFix | Construction height 10 cm, frame profile width 23 mm. Four tie holes per panel height 350 cm, three tie holes per panel height 300, 270 and 250 cm, two tie holes per panel height 150 and 135 cm. The frames of the AF panels are made of closed 3-chamber aluminium profiles (double groove) or 2-chamber aluminium profiles (single groove) and are torsion-proof. They are easy to clean thanks to their high-quality annealed powder coating. The AluFix AL panels are equipped with alkus facing. All-around grooves and EA assembly locks (double groove) or E assembly locks (single groove) guarantee a tight and perfectly aligned panel connection. Anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories. |
|
| AluFix | AluFix AL | AluFix AL | 22-139-60 | 135/40 | 0.54 | 12.81 | AluFix | Construction height 10 cm, frame profile width 23 mm. Four tie holes per panel height 350 cm, three tie holes per panel height 300, 270 and 250 cm, two tie holes per panel height 150 and 135 cm. The frames of the AF panels are made of closed 3-chamber aluminium profiles (double groove) or 2-chamber aluminium profiles (single groove) and are torsion-proof. They are easy to clean thanks to their high-quality annealed powder coating. The AluFix AL panels are equipped with alkus facing. All-around grooves and EA assembly locks (double groove) or E assembly locks (single groove) guarantee a tight and perfectly aligned panel connection. Anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories. |
|
| AluFix | AluFix AL | AluFix AL | 22-139-75 | 135/25 | 0.34 | 12.81 | AluFix | Construction height 10 cm, frame profile width 23 mm. Four tie holes per panel height 350 cm, three tie holes per panel height 300, 270 and 250 cm, two tie holes per panel height 150 and 135 cm. The frames of the AF panels are made of closed 3-chamber aluminium profiles (double groove) or 2-chamber aluminium profiles (single groove) and are torsion-proof. They are easy to clean thanks to their high-quality annealed powder coating. The AluFix AL panels are equipped with alkus facing. All-around grooves and EA assembly locks (double groove) or E assembly locks (single groove) guarantee a tight and perfectly aligned panel connection. Anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories. |
|
| AluFix | Foundation tape | Foundation tape 50 m | 29-307-50 | 20.00 | AluFix | Galvanized. Hole spacing 50 mm, hole Ø 16 mm, length 50 m. Adm. tractive force 10 kN. To be cut at hole center. Together with the appropriate tensioner it serves as bottom tie when panels are assembled in horizontal position. |
|
||
| AluFix | Tensioner EA for foundation tape | Tensioner EA for foundation tape | 29-307-75 | 1.26 | AluFix | Galvanized. Connects the foundation tape to EcoAs or AluFix-panels and serves as bottom tie when panels are assembled in horizontal position. Two tensioners are required per tieing position. |
|
||
| AluFix | Trolley for foundation tape | Trolley for foundation tape | 29-307-55 | 21.80 | AluFix | Not shown. Galvanized. Is used to transport and cut foundation tape to length. Suitable for one roll. Pneumatic wheels. | |||
| AluFix | AluFix AL-IC | AluFix AL-IC | 22-154-05 | 350/20 | 1.40 | 30.80 | AluFix | AF inside corner Aluminium. With annealead power coating. For 90° corners, side length 20 cm. |
|
| AluFix | AluFix AL-IC | AluFix AL-IC | 22-154-10 | 300/20 | 1.20 | 26.08 | AluFix | AF inside corner Aluminium. With annealead power coating. For 90° corners, side length 20 cm. |
|
| AluFix | AluFix AL-IC | AluFix AL-IC | 22-154-15 | 270/20 | 1.08 | 23.81 | AluFix | AF inside corner Aluminium. With annealead power coating. For 90° corners, side length 20 cm. |
|
| AluFix | AluFix AL-IC | AluFix AL-IC | 22-154-25 | 250/20 | 1.00 | 21.98 | AluFix | AF inside corner Aluminium. With annealead power coating. For 90° corners, side length 20 cm. |
|
| AluFix | AluFix AL-IC | AluFix AL-IC | 22-154-30 | 150/20 | 0.60 | 13.55 | AluFix | AF inside corner Aluminium. With annealead power coating. For 90° corners, side length 20 cm. |
|
| AluFix | AluFix AL-IC | AluFix AL-IC | 22-154-35 | 135/20 | 0.54 | 12.90 | AluFix | AF inside corner Aluminium. With annealead power coating. For 90° corners, side length 20 cm. |
|
| AluFix | AluFix OC | AluFix OC | 22-150-01 | 350 | 107.00 | AluFix | AF outside corner Aluminium. With annealed powder coating. Provides a tight outside corner assembly for 90° angles when used together with AF panels and EA assembly locks (double groove) or E assembly locks (single groove). |
|
|
| AluFix | AluFix OC | AluFix OC | 22-150-02 | 300 | 9.20 | AluFix | AF outside corner Aluminium. With annealed powder coating. Provides a tight outside corner assembly for 90° angles when used together with AF panels and EA assembly locks (double groove) or E assembly locks (single groove). |
|
|
| AluFix | AluFix OC | AluFix OC | 22-150-03 | 270 | 8.20 | AluFix | AF outside corner Aluminium. With annealed powder coating. Provides a tight outside corner assembly for 90° angles when used together with AF panels and EA assembly locks (double groove) or E assembly locks (single groove). |
|
|
| AluFix | AluFix OC | AluFix OC | 22-150-06 | 250 | 7.60 | AluFix | AF outside corner Aluminium. With annealed powder coating. Provides a tight outside corner assembly for 90° angles when used together with AF panels and EA assembly locks (double groove) or E assembly locks (single groove). |
|
|
| AluFix | AluFix OC | AluFix OC | 22-150-12 | 150 | 4.70 | AluFix | AF outside corner Aluminium. With annealed powder coating. Provides a tight outside corner assembly for 90° angles when used together with AF panels and EA assembly locks (double groove) or E assembly locks (single groove). |
|
|
| AluFix | AluFix OC | AluFix OC | 22-150-14 | 135 | 4.30 | AluFix | AF outside corner Aluminium. With annealed powder coating. Provides a tight outside corner assembly for 90° angles when used together with AF panels and EA assembly locks (double groove) or E assembly locks (single groove). |
|
|
| AluFix | AluFix HIC | AluFix HIC | 22-151-90 | 150 | 0.60 | 35.00 | AluFix | AF hinged inside corner, Steel construction with steel sheeting. Primed and cavity-sealed. Side length 20 cm. Adjustable angle 80°–180° when used as inside corner, or 95°–180° when used as outside corner. |
|
| AluFix | AluFix HIC | AluFix HIC | 22-151-92 | 135 | 0.54 | 30.60 | AluFix | AF hinged inside corner, Steel construction with steel sheeting. Primed and cavity-sealed. Side length 20 cm. Adjustable angle 80°–180° when used as inside corner, or 95°–180° when used as outside corner. |
|
| AluFix | AluFix HOC | AluFix HOC | 22-151-70 | 150 | 0.60 | 20.50 | AluFix | AF hinged outside corner, steel construction with steel sheeting. Primed and cavity-sealed. Side length 1.5 cm. Adjustable angle 0°–120°. |
|
| AluFix | AluFix HOC | AluFix HOC | 22-151-72 | 135 | 0.54 | 18.30 | AluFix | AF hinged outside corner, steel construction with steel sheeting. Primed and cavity-sealed. Side length 1.5 cm. Adjustable angle 0°–120°. |
|
| AluFix | AluFix BP | AluFix BP | 22-133-09 | 350/90 | 3.15 | 58.08 | AluFix | The AluFix BP panels are equipped withbirch-ply facing. |
|
| AluFix | AluFix BP | AluFix BP | 22-133-24 | 350/75 | 2.63 | 49.04 | AluFix | The AluFix BP panels are equipped withbirch-ply facing. |
|
| AluFix | AluFix BP | AluFix BP | 22-133-44 | 350/55 | 1.93 | 38.74 | AluFix | The AluFix BP panels are equipped withbirch-ply facing. |
|
| AluFix | AluFix BP | AluFix BP | 22-133-59 | 350/40 | 1.40 | 30.72 | AluFix | The AluFix BP panels are equipped withbirch-ply facing. |
|
| AluFix | AluFix BP | AluFix BP | 22-133-74 | 350/25 | 0.88 | 23.03 | AluFix | The AluFix BP panels are equipped withbirch-ply facing. |
|
| AluFix | AluFix BP | AluFix BP | 22-134-24 | 300/75 | 2.25 | 42.84 | AluFix | The AluFix BP panels are equipped withbirch-ply facing. |
|
| AluFix | AluFix BP | AluFix BP | 22-134-44 | 300/55 | 1.65 | 34.46 | AluFix | The AluFix BP panels are equipped withbirch-ply facing. |
|
| AluFix | AluFix BP | AluFix BP | 22-134-59 | 300/40 | 1.20 | 27.93 | AluFix | The AluFix BP panels are equipped withbirch-ply facing. |
|
| AluFix | AluFix BP | AluFix BP | 22-134-74 | 300/25 | 0.75 | 20.35 | AluFix | The AluFix BP panels are equipped withbirch-ply facing. |
|
| AluFix | AluFix BP | AluFix BP | 22-137-09 | 270/90 | 2.43 | 44.35 | AluFix | The AluFix BP panels are equipped withbirch-ply facing. |
|
| AluFix | AluFix BP | AluFix BP | 22-137-24 | 270/75 | 2.02 | 38.49 | AluFix | The AluFix BP panels are equipped withbirch-ply facing. |
|
| AluFix | AluFix BP | AluFix BP | 22-137-44 | 270/55 | 1.49 | 29.61 | AluFix | The AluFix BP panels are equipped withbirch-ply facing. |
|
| AluFix | AluFix BP | AluFix BP | 22-137-59 | 270/40 | 1.08 | 23.50 | AluFix | The AluFix BP panels are equipped withbirch-ply facing. |
|
| AluFix | AluFix BP | AluFix BP | 22-137-74 | 270/25 | 0.68 | 17.64 | AluFix | The AluFix BP panels are equipped withbirch-ply facing. |
|
| AluFix | AluFix BP | AluFix BP | 22-138-09 | 250/90 | 2.25 | 42.09 | AluFix | The AluFix BP panels are equipped withbirch-ply facing. |
|
| AluFix | AluFix BP | AluFix BP | 22-138-24 | 250/75 | 1.88 | 35.50 | AluFix | The AluFix BP panels are equipped withbirch-ply facing. |
|
| AluFix | AluFix BP | AluFix BP | 22-138-44 | 250/55 | 1.38 | 28.03 | AluFix | The AluFix BP panels are equipped withbirch-ply facing. |
|
| AluFix | AluFix BP | AluFix BP | 22-138-59 | 250/40 | 1.55 | 22.19 | AluFix | The AluFix BP panels are equipped withbirch-ply facing. |
|
| AluFix | AluFix BP | AluFix BP | 22-138-74 | 250/25 | 0.63 | 16.60 | AluFix | The AluFix BP panels are equipped withbirch-ply facing. |
|
| AluFix | AluFix BP | AluFix BP | 22-135-09 | 150/90 | 1.35 | 25.51 | AluFix | The AluFix BP panels are equipped withbirch-ply facing. |
|
| AluFix | AluFix BP | AluFix BP | 22-135-24 | 150/75 | 1.13 | 21.72 | AluFix | The AluFix BP panels are equipped withbirch-ply facing. |
|
| AluFix | AluFix BP | AluFix BP | 22-135-44 | 150/55 | 0.95 | 17.42 | AluFix | The AluFix BP panels are equipped withbirch-ply facing. |
|
| AluFix | AluFix BP | AluFix BP | 22-135-59 | 150/40 | 0.60 | 14.05 | AluFix | The AluFix BP panels are equipped withbirch-ply facing. |
|
| AluFix | AluFix BP | AluFix BP | 22-135-74 | 150/25 | 0.38 | 9.62 | AluFix | The AluFix BP panels are equipped withbirch-ply facing. |
|
| AluFix | AluFix BP | AluFix BP | 22-139-09 | 135/90 | 1.22 | 22.15 | AluFix | The AluFix BP panels are equipped withbirch-ply facing. |
|
| AluFix | AluFix BP | AluFix BP | 22-139-24 | 135/75 | 1.01 | 19.32 | AluFix | The AluFix BP panels are equipped withbirch-ply facing. |
|
| AluFix | AluFix BP | AluFix BP | 22-139-44 | 135/55 | 0.74 | 15.28 | AluFix | The AluFix BP panels are equipped withbirch-ply facing. |
|
| AluFix | AluFix BP | AluFix BP | 22-139-59 | 135/40 | 0.54 | 12.08 | AluFix | The AluFix BP panels are equipped withbirch-ply facing. |
|
| AluFix | AluFix BP | AluFix BP | 22-139-74 | 135/25 | 0.34 | 9.05 | AluFix | The AluFix BP panels are equipped withbirch-ply facing. |
|
| AluFix | AluFix SC | AluFix SC | 22-151-00 | 350/25 | 0.88 | 126.00 | AluFix | AF stripping corner, aluminium, 3 parts. With annealed powder coating and tie holes. When assembling and stripping the formwork, the AF stripping corners are pressed against and removed from the concrete by using the integrated spanner. |
|
| AluFix | AluFix SC | AluFix SC | 22-151-10 | 300/25 | 0.75 | 108.00 | AluFix | AF stripping corner, aluminium, 3 parts. With annealed powder coating and tie holes. When assembling and stripping the formwork, the AF stripping corners are pressed against and removed from the concrete by using the integrated spanner. |
|
| AluFix | AluFix SC | AluFix SC | 22-151-12 | 270/25 | 0.68 | 97.20 | AluFix | AF stripping corner, aluminium, 3 parts. With annealed powder coating and tie holes. When assembling and stripping the formwork, the AF stripping corners are pressed against and removed from the concrete by using the integrated spanner. |
|
| AluFix | AluFix SC | AluFix SC | 22-151-15 | 250/25 | 0.62 | 90.00 | AluFix | AF stripping corner, aluminium, 3 parts. With annealed powder coating and tie holes. When assembling and stripping the formwork, the AF stripping corners are pressed against and removed from the concrete by using the integrated spanner. |
|
| AluFix | AluFix SC | AluFix SC | 22-151-20 | 150/25 | 0.38 | 58.50 | AluFix | AF stripping corner, aluminium, 3 parts. With annealed powder coating and tie holes. When assembling and stripping the formwork, the AF stripping corners are pressed against and removed from the concrete by using the integrated spanner. |
|
| AluFix | AluFix SC | AluFix SC | 22-151-25 | 135/25 | 0.34 | 52.70 | AluFix | AF stripping corner, aluminium, 3 parts. With annealed powder coating and tie holes. When assembling and stripping the formwork, the AF stripping corners are pressed against and removed from the concrete by using the integrated spanner. |
|
| AluFix | Adhesive tape, red | Adhesive tape 50 m, red | 41-912-10 | 0.83 | AluFix | Not shown. Reinforced adhesive tape, red, 50 mm wide, 50 running metres. Total thickness: 270 mµ. Natural rubber adhesive on one side. PE-coated. | |||
| AluFix | Formwork-prop connector for stripping corner | Connector for stripping corner | 29-306-00 | 3.10 | AluFix | Painted. Used to attach the ratchet load tensioner to allow the AF stripping corner to be used. Attached to the AF panel with flange screw 18. |
|
||
| AluFix | Ratchet load tensioner | Ratchet load tensioner | 29-306-05 | 0.34 | AluFix | Not shown. Used to activate the AF stripping corner. Attached to the AF panels to the left and right of the stripping corner with two formwork-prop connectors for stripping corner. | |||
| AluFix | Assembly lock | EA-assembly lock | 29-205-50 | 1.50 | AluFix | Galvanized. Tightly connects and aligns AluFix and EcoAs panels. Clamping length 4.6 cm. |
|
||
| AluFix | Uni-assembly lock | Uni-assembly lock 22 | 29-400-85 | 3.60 | AluFix | Galvanized. For stepless compensation. Clamping length 22 cm or 28 cm. |
|
||
| AluFix | Uni-assembly lock | Uni-assembly lock 28 | 29-400-90 | 3.90 | AluFix | Galvanized. For stepless compensation. Clamping length 22 cm or 28 cm. |
|
||
| AluFix | RS-assembly lock | RS-assembly lock | 23-807-70 | 4.70 | AluFix | Galvanized, For stepless length compensation. Clamping length is 11.9 to 20.5 cm for stepless compensation. |
|
||
| AluFix | E-assembly lock with coupling | E-Uni-assembly lock | 29-103-60 | 2.00 | AluFix | Galvanized. Is used to attach push-pull props at the AluFix and EcoAs panel joints. Clamping length 4.6 cm. |
|
||
| AluFix | E-assembly lock with coupling | E-Assembly lock with coupling | 29-802-70 | 1.00 | AluFix | Galvanized. Is used to attach push-pull props at the AluFix and EcoAs panel joints. Clamping length 4.6 cm. |
|
||
| AluFix | Transition lock AF-ST/AS | Transition lock AF - ST/AS | 29-103-30 | 3.20 | AluFix | Is used as a connecting assembly lock at the joint of AF panels with ST or AS panels. Can be used on the right or left side of inside corner areas by turning the sliding part. |
|
||
| AluFix | Flange screw | Flange screw 18 | 29-401-10 | 1.10 | AluFix | Galvanized. DW thread Ø 15 mm. Is used to attach accessories, e.g. alignment rails, brace frames, push-pull props, etc. Length of thread 18 cm or 27 cm. |
|
||
| AluFix | Flange screw | Flange screw 28 | 29-401-12 | 1.23 | AluFix | Galvanized. DW thread Ø 15 mm. Is used to attach accessories, e.g. alignment rails, brace frames, push-pull props, etc. Length of thread 18 cm or 27 cm. |
|
||
| AluFix | AF compensation profile | AF-compensation profile 264 | 29-200-20 | 24.00 | AluFix | Steel frame profile with angles. Primed and cavity-sealed. Is clamped to the AF panel with two E assembly locks and used for job-built fillers consisting of short squared timber and a facing. Delivery and weight by pairs. |
|
||
| AluFix | AF compensation profile | AF-compensation profile 132 | 29-200-30 | 12.00 | AluFix | Steel frame profile with angles. Primed and cavity-sealed. Is clamped to the AF panel with two E assembly locks and used for job-built fillers consisting of short squared timber and a facing. Delivery and weight by pairs. |
|
||
| AluFix | Corner angle 40/60 | Corner angle 40/60 | 29-402-25 | 9.50 | AluFix | Galvanized. Side lengths 40 cm and 60 cm. For inside and outside corners and column formwork. |
|
||
| AluFix | Plug D20 | Plug D20 | 29-902-63 | 0.20 | AluFix | Is used to close unused tie holes (AluFix, EcoAs, AluStar and StarTec). |
|
||
| AluFix | Plug D20 | Plug D20 without imprint | 29-902-62 | 0.20 | AluFix | Is used to close unused tie holes (AluFix, EcoAs, AluStar and StarTec). |
|
||
| AluFix | AS alignment rail | AS-alignment rail 50, galv. | 29-201-73 | 5.20 | AluFix | Galvanized. Is used to brace panel joints for crane ganging, bridge problem areas, brace compensation areas and build stop ends with stop end fixtures. Is attached to the formwork with flange screws. |
|
||
| AluFix | AS alignment rail | AS-alignment rail 125, galv. | 29-201-75 | 10.50 | AluFix | Galvanized. Is used to brace panel joints for crane ganging, bridge problem areas, brace compensation areas and build stop ends with stop end fixtures. Is attached to the formwork with flange screws. |
|
||
| AluFix | AS alignment rail | AS-alignment rail 200, galv. | 29-201-80 | 19.00 | AluFix | Galvanized. Is used to brace panel joints for crane ganging, bridge problem areas, brace compensation areas and build stop ends with stop end fixtures. Is attached to the formwork with flange screws. |
|
||
| AluFix | Tie rod DW 15/90 | Tie rod DW 15/90 | 29-900-80 | 1.25 | AluFix | Uncoated, not weldable. DW thread Ø 15 mm. Adm. load capacity 90 kN (DIN 18216). Is used to tie panels of a double-sided formwork. |
|
||
| AluFix | Tie wrench DW15/DW20 | Tie wrench DW15/DW20 | 29-901-39 | 4.50 | AluFix | Made of steel, galvanized. Used to screw in, screw out and hold tie rods DW15 and DW20; length 400 mm. |
|
||
| AluFix | Tie rod holder | Tie rod fixture Ø35 | 29-927-05 | 1.20 | AluFix | Galvanised. To hold DW tie rods with articulated flange nut, XT tie rods or XT taper ties. Can be used with horizontal or vertical MEVA wall formwork panels. |
|
||
| AluFix | Plastic tube | Plastic tube D22/200 | 29-902-30 | 8.75 | AluFix | Plastic spacer tube for tie holes. Two cones are also required per tie hole. Internal Ø 22 mm, external Ø 28 mm, standard length 2.00 m. |
|
||
| AluFix | Cone for plastic tube | Cone for plastic tube D22/10 (10 mm covering) | 29-902-40 | 13.00 | AluFix | Available with 10 mm or 30 mm covering . |
|
||
| AluFix | Cone for plastic tube | Cone for plastic tube D22/30 (30 mm covering) | 29-902-50 | 3.25 | AluFix | Available with 10 mm or 30 mm covering . |
|
||
| AluFix | Articulated flange nut 15/120 | Articulated flange nut 15/120 (SW 27) | 29-900-10 | 1.81 | AluFix | Forged, galvanized. DIN 18218. DW thread Ø 15 mm, plate Ø 120 mm, max. inclination 10°, SW 27. Max. load capacity 90 kN. Reduces wear of panel coating. |
|
||
| AluFix | Articulated flange nut 15/120 | Articulated flange nut AF - ST/AS | 29-900-18 | 2.32 | AluFix | Forged, galvanized. DIN 18218. DW thread Ø 15 mm, plate Ø 120 mm, max. inclination 10°, SW 27. Max. load capacity 90 kN. Reduces wear of panel coating. |
|
||
| AluFix | Spanner SW 27 | Spanner SW 27 | 29-800-10 | 1.80 | AluFix | Inset yellow chromated. Spanner width (SW) 27 mm. Is used to tighten and loosen flange nuts 100, articulated flange nuts 15/120 and flange screws. |
|
||
| AluFix | Drive nut 60 | Drive nut 60 | 29-900-23 | 0.50 | AluFix | Galvanized. DW thread Ø 15 mm, plate Ø 60 mm. Adm. load capacity 90 kN (DIN 18216). Is used to tie the formwork to the ground or to a wall connection. |
|
||
| AluFix | Tie claw 23 | Tie claw 23 | 29-901-44 | 0.17 | AluFix | Galvanized. Permits tieing (with tie rod DW 15 and flange nut 100) directly above or beside EcoAs and AluFix panels. |
|
||
| AluFix | Crane hooks | EA/AF-crane hook | 29-103-05 | 6.00 | AluFix | Coated. Is used to move and crane-gang AluFix and EcoAs panels. Self-locking. Load capacity 6 kN (600 kg). Always two crane hooks required per gang. Refer to the crane hook Operating Instructions for application and safety test. |
|
||
| AluFix | Brace frame 250 | Brace frame 250 with formwork-prop connector | 29-109-20 | 31.50 | AluFix | Galvanized. Available with formwork-prop connector. Is used to align and brace the formwork. Consists of a push-pull prop R 250 (190–320 cm), a brace SRL 120 (90–150 cm) and a double-jointed footplate.The formwork-prop connectors are attached to the formwork with flange screws 18. |
|
||
| AluFix | Formwork-prop connector | Formwork-prop connector | 29-804-85 | 1.65 | AluFix | Galvanized. Connects braces, brace frames and push-pull props (max. Ø 48 mm) to the multi-function profile with a flange screw 18. Delivery includes head bolt 16/90 and cotter pin 4. |
|
||
| AluFix | Walkway bracket | Walkway bracket 90 (yellow), galv. | 29-106-00 | 10.30 | AluFix | Galvanized, yellow, pluggable. Is used as working and safety scaffold. Is attached to the multi-function profile and secured to the multi-function profile below with a flange screw 18. The planking can be mounted to the brackets. Working width approx. 90 cm. MEVA Guard-railing post is also required. Bracket spacing depends on type of planking (DIN 4420). |
|
||
| AluFix | Walkway bracket | Walkway bracket E | 29-104-82 | 8.00 | AluFix | Galvanized, yellow, pluggable. Is used as working and safety scaffold. Is attached to the multi-function profile and secured to the multi-function profile below with a flange screw 18. The planking can be mounted to the brackets. Working width approx. 90 cm. MEVA Guard-railing post is also required. Bracket spacing depends on type of planking (DIN 4420). |
|
||
| AluFix | Side railing | Side railing 90/100, galv. | 29-108-20 | 12.30 | AluFix | Galvanized. Is plugged into the walkway bracket. |
|
||
| AluFix | Side railing | Side railing 125/100, galv. | 29-108-30 | 13.80 | AluFix | Galvanized. Is plugged into the walkway bracket. |
|
||
| AluFix | Guard-railing post | Guard-railing post 100 | 29-106-75 | 3.70 | AluFix | Galvanized. Is plugged into the walkway bracket. |
|
||
| AluFix | Guard-railing post | Guard-railing post 140 | 29-106-85 | 4.70 | AluFix | Galvanized. Is plugged into the walkway bracket. |
|
||
| AluFix | Guard-railing post 48 | Guard-railing post 48/120 (UK) | 29-106-80 | 5.50 | AluFix | Galvanized. With manifold to be plugged into the walkway bracket and with 48 mm Ø tube to attach scaffold couplers. |
|
||
| AluFix | Guard-railing post 48 | Guard-railing post 48/134 | 29-920-80 | 5.45 | AluFix | Galvanized. With manifold to be plugged into the walkway bracket and with 48 mm Ø tube to attach scaffold couplers. |
|
||
| AluFix | Tilting bracket 23 | Tilting bracket 23 | 29-920-84 | 4.77 | AluFix | Galvanised. Used to attach MEVA guardrailing posts to create a fall protection system. It can be set up vertically to facilitate the installation of safety meshes or railing boards or inclined by 15° to create a larger working area. Secured with a wedge to the frame profile of 23 mm. |
|
||
| AluFix | Scaffold tube | Scaffold tube 48/200 | 29-412-23 | 9.40 | AluFix | Galvanized. Is used as hand-rail / mid-rail in combination with guard-railing post 48. |
|
||
| AluFix | Scaffold tube | Scaffold tube 48/300 | 29-412-26 | 14.10 | AluFix | Galvanized. Is used as hand-rail / mid-rail in combination with guard-railing post 48. |
|
||
| AluFix | Scaffold tube | Scaffold tube 48/400 | 29-412-27 | 18.80 | AluFix | Galvanized. Is used as hand-rail / mid-rail in combination with guard-railing post 48. |
|
||
| AluFix | Scaffold tube | Scaffold tube 48/500 | 29-412-25 | 23.50 | AluFix | Galvanized. Is used as hand-rail / mid-rail in combination with guard-railing post 48. |
|
||
| AluFix | Scaffold tube | Scaffold tube 48/600 | 29-412-28 | 28.20 | AluFix | Galvanized. Is used as hand-rail / mid-rail in combination with guard-railing post 48. |
|
||
| AluFix | Swivel-joint coupler 48/48 | Swivel-joint coupler 48/48 | 29-412-52 | 1.20 | AluFix | Galvanized. Connects 2 scaffold tubes with Ø 48,3 mm at any angle required. |
|
||
| AluFix | Transport angle | Transport angle 10, rigid type | 29-305-15 | 10.40 | AluFix | Is used to stack and transport 5 to 12 EcoAs or AluFix panels. Distance between holes 10 cm. We recommend using 2 foldable angles and 2 angles of the rigid type per stack. Max. load capacity is 10 kN per angle. For safety reasons consider 20 kN as maximum capacity for the whole stack. |
|
||
| AluFix | Transport angle | Transport angle 10 | 29-305-10 | 16.00 | AluFix | Is used to stack and transport 5 to 12 EcoAs or AluFix panels. Distance between holes 10 cm. We recommend using 2 foldable angles and 2 angles of the rigid type per stack. Max. load capacity is 10 kN per angle. For safety reasons consider 20 kN as maximum capacity for the whole stack. |
|
||
| AluFix | Safety plug AS/ST stacks, black | Safety plug AS/ST stacks, black | 40-131-10 | 19.00 | AluFix | Plastic, black. Secures stacked AluFix, EcoAs, AluStar and StarTec panels. |
|
||
| AluFix | AF prop head | AF-prop head | 29-202-80 | 1.53 | AluFix | Painted. Supports AluFix panels for slabs up to 46 cm thick. The prop head is plugged to the prop’s head or foot plate and secured with pin 14/90 (or with pin 14/135 to the outer tube of the MEP prop). |
|
||
| AluFix | Tripod | Tripod | 29-905-50 | 12.20 | AluFix | Galvanized auxiliary to stabilize props with Ø 48 to 80 mm. The turnable legs allow the tripod to be used in rooms, along walls or in corners. The tripod can be attached to the aluminium profile of the MEP props with the MD safety claw. |
|
||
| AluFix | Tripod | Tripod 120 | 29-905-52 | 17.70 | AluFix | Galvanized auxiliary to stabilize props with Ø 48 to 80 mm. The turnable legs allow the tripod to be used in rooms, along walls or in corners. The tripod can be attached to the aluminium profile of the MEP props with the MD safety claw. |
|
||
| AluFix | Pin | Pin 14/90 | 29-909-94 | 0.13 | AluFix | Galvanized. Is used to attach MD drop heads, MD prop heads of forked prop heads, etc. to the props. Pin 14/90 is used for steel tube props up to Ø 63 mm. Pin 14/135 is used with the aluminium profile of MEP props and MEP extension pieces. |
|
||
| AluFix | Pin | Pin 14/135 | 29-909-90 | 0.18 | AluFix | Galvanized. Is used to attach MD drop heads, MD prop heads of forked prop heads, etc. to the props. Pin 14/90 is used for steel tube props up to Ø 63 mm. Pin 14/135 is used with the aluminium profile of MEP props and MEP extension pieces. |
|
||
| AluFix | EuMax 30 | EuMax 30/150 | 29-907-46 | 10.40 | AluFix | Galvanized. According to European Standard EN 1065, class E. Admissible load capacity 30 kN. Higher load capacities are permitted when used with MEVA formwork (see the MevaDec Technical Instruction Manual). |
|
||
| AluFix | EuMax 30 | EuMax 30/250 | 29-907-51 | 18.10 | AluFix | Galvanized. According to European Standard EN 1065, class E. Admissible load capacity 30 kN. Higher load capacities are permitted when used with MEVA formwork (see the MevaDec Technical Instruction Manual). |
|
||
| AluFix | EuMax 30 | EuMax 30/350 | 29-907-61 | 23.00 | AluFix | Galvanized. According to European Standard EN 1065, class E. Admissible load capacity 30 kN. Higher load capacities are permitted when used with MEVA formwork (see the MevaDec Technical Instruction Manual). |
|
||
| AluFix | EuMax 30 | EuMax 30/450 | 29-907-62 | 32.40 | AluFix | Galvanized. According to European Standard EN 1065, class E. Admissible load capacity 30 kN. Higher load capacities are permitted when used with MEVA formwork (see the MevaDec Technical Instruction Manual). |
|
||
| AluFix | EuMax 20 | EuMax 20/300 | 29-907-36 | 16.90 | AluFix | Galvanized. According to the European Standard EN 1065, class D. The admissible load capacity is 20 kN at any extension. Higher load capacities are permitted when used with MEVA formwork (see the MevaDec Technical Instruction Manual). |
|
||
| AluFix | EuMax 20 | EuMax 20/400 | 29-907-41 | 23.80 | AluFix | Galvanized. According to the European Standard EN 1065, class D. The admissible load capacity is 20 kN at any extension. Higher load capacities are permitted when used with MEVA formwork (see the MevaDec Technical Instruction Manual). |
|
||
| AluFix | EuMax 20 | EuMax 20/550 | 29-907-45 | 37.00 | AluFix | Galvanized. According to the European Standard EN 1065, class D. The admissible load capacity is 20 kN at any extension. Higher load capacities are permitted when used with MEVA formwork (see the MevaDec Technical Instruction Manual). |
|
||
| AluStar | AS panels | AS-panel AL 17 | 22-083-01 | 270/ 90 | 2.43 | 65.05 | AluStar | Construction height 12 cm, frame profile width 40 mm. Two tie holes per panel height 270 cm, one tie holes per panel height 135 cm and 90 cm. Absolutely compatible with StarTec panels. The frames of AS panels are made of closed 2-chamber aluminium profiles and are torsion-proof. Thanks to their high-quality annealed powder coating they are easy to clean. AS panelsare equipped with alkus facing and ergonomic grip profiles. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories. |
|
| AluStar | AS panels | AS-panel AL 17 | 22-084-01 | 270/ 75 | 2.03 | 60.20 | AluStar | Construction height 12 cm, frame profile width 40 mm. Two tie holes per panel height 270 cm, one tie holes per panel height 135 cm and 90 cm. Absolutely compatible with StarTec panels. The frames of AS panels are made of closed 2-chamber aluminium profiles and are torsion-proof. Thanks to their high-quality annealed powder coating they are easy to clean. AS panelsare equipped with alkus facing and ergonomic grip profiles. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories. |
|
| AluStar | AS panels | AS-panel AL 17 | 22-084-31 | 270/ 55 | 1.49 | 48.60 | AluStar | Construction height 12 cm, frame profile width 40 mm. Two tie holes per panel height 270 cm, one tie holes per panel height 135 cm and 90 cm. Absolutely compatible with StarTec panels. The frames of AS panels are made of closed 2-chamber aluminium profiles and are torsion-proof. Thanks to their high-quality annealed powder coating they are easy to clean. AS panelsare equipped with alkus facing and ergonomic grip profiles. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories. |
|
| AluStar | AS panels | AS-panel AL 17 | 22-084-34 | 270/ 50 | 1.35 | 39.10 | AluStar | Construction height 12 cm, frame profile width 40 mm. Two tie holes per panel height 270 cm, one tie holes per panel height 135 cm and 90 cm. Absolutely compatible with StarTec panels. The frames of AS panels are made of closed 2-chamber aluminium profiles and are torsion-proof. Thanks to their high-quality annealed powder coating they are easy to clean. AS panelsare equipped with alkus facing and ergonomic grip profiles. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories. |
|
| AluStar | AS panels | AS-panel AL 17 | 22-084-37 | 270/ 49 | 1.32 | 39.00 | AluStar | Construction height 12 cm, frame profile width 40 mm. Two tie holes per panel height 270 cm, one tie holes per panel height 135 cm and 90 cm. Absolutely compatible with StarTec panels. The frames of AS panels are made of closed 2-chamber aluminium profiles and are torsion-proof. Thanks to their high-quality annealed powder coating they are easy to clean. AS panelsare equipped with alkus facing and ergonomic grip profiles. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories. |
|
| AluStar | AS panels | AS-panel AL 17 | 22-084-46 | 270/ 45 | 1.22 | 36.30 | AluStar | Construction height 12 cm, frame profile width 40 mm. Two tie holes per panel height 270 cm, one tie holes per panel height 135 cm and 90 cm. Absolutely compatible with StarTec panels. The frames of AS panels are made of closed 2-chamber aluminium profiles and are torsion-proof. Thanks to their high-quality annealed powder coating they are easy to clean. AS panelsare equipped with alkus facing and ergonomic grip profiles. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories. |
|
| AluStar | AS panels | AS-panel AL 17 | 22-084-56 | 270/ 40 | 1.08 | 33.50 | AluStar | Construction height 12 cm, frame profile width 40 mm. Two tie holes per panel height 270 cm, one tie holes per panel height 135 cm and 90 cm. Absolutely compatible with StarTec panels. The frames of AS panels are made of closed 2-chamber aluminium profiles and are torsion-proof. Thanks to their high-quality annealed powder coating they are easy to clean. AS panelsare equipped with alkus facing and ergonomic grip profiles. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories. |
|
| AluStar | AS panels | AS-panel AL 17 | 22-084-71 | 270/ 30 | 0.81 | 27.80 | AluStar | Construction height 12 cm, frame profile width 40 mm. Two tie holes per panel height 270 cm, one tie holes per panel height 135 cm and 90 cm. Absolutely compatible with StarTec panels. The frames of AS panels are made of closed 2-chamber aluminium profiles and are torsion-proof. Thanks to their high-quality annealed powder coating they are easy to clean. AS panelsare equipped with alkus facing and ergonomic grip profiles. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories. |
|
| AluStar | AS panels | AS-panel AL 17 | 22-084-76 | 270/ 25 | 0.68 | 25.00 | AluStar | Construction height 12 cm, frame profile width 40 mm. Two tie holes per panel height 270 cm, one tie holes per panel height 135 cm and 90 cm. Absolutely compatible with StarTec panels. The frames of AS panels are made of closed 2-chamber aluminium profiles and are torsion-proof. Thanks to their high-quality annealed powder coating they are easy to clean. AS panelsare equipped with alkus facing and ergonomic grip profiles. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories. |
|
| AluStar | AS panels | AS-panel AL 17 | 22-084-81 | 270/ 24 | 0.65 | 24.50 | AluStar | Construction height 12 cm, frame profile width 40 mm. Two tie holes per panel height 270 cm, one tie holes per panel height 135 cm and 90 cm. Absolutely compatible with StarTec panels. The frames of AS panels are made of closed 2-chamber aluminium profiles and are torsion-proof. Thanks to their high-quality annealed powder coating they are easy to clean. AS panelsare equipped with alkus facing and ergonomic grip profiles. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories. |
|
| AluStar | AS panels | AS-panel AL 17 | 22-084-86 | 270/ 20 | 0.54 | 22.20 | AluStar | Construction height 12 cm, frame profile width 40 mm. Two tie holes per panel height 270 cm, one tie holes per panel height 135 cm and 90 cm. Absolutely compatible with StarTec panels. The frames of AS panels are made of closed 2-chamber aluminium profiles and are torsion-proof. Thanks to their high-quality annealed powder coating they are easy to clean. AS panelsare equipped with alkus facing and ergonomic grip profiles. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories. |
|
| AluStar | AS panels | AS-panel AL 17 | 22-085-01 | 135/ 90 | 1.22 | 35.50 | AluStar | Construction height 12 cm, frame profile width 40 mm. Two tie holes per panel height 270 cm, one tie holes per panel height 135 cm and 90 cm. Absolutely compatible with StarTec panels. The frames of AS panels are made of closed 2-chamber aluminium profiles and are torsion-proof. Thanks to their high-quality annealed powder coating they are easy to clean. AS panelsare equipped with alkus facing and ergonomic grip profiles. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories. |
|
| AluStar | AS panels | AS-panel AL 17 | 22-086-01 | 135/ 75 | 1.01 | 31.20 | AluStar | Construction height 12 cm, frame profile width 40 mm. Two tie holes per panel height 270 cm, one tie holes per panel height 135 cm and 90 cm. Absolutely compatible with StarTec panels. The frames of AS panels are made of closed 2-chamber aluminium profiles and are torsion-proof. Thanks to their high-quality annealed powder coating they are easy to clean. AS panelsare equipped with alkus facing and ergonomic grip profiles. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories. |
|
| AluStar | AS panels | AS-panel AL 17 | 22-086-31 | 135/ 55 | 0.74 | 25.50 | AluStar | Construction height 12 cm, frame profile width 40 mm. Two tie holes per panel height 270 cm, one tie holes per panel height 135 cm and 90 cm. Absolutely compatible with StarTec panels. The frames of AS panels are made of closed 2-chamber aluminium profiles and are torsion-proof. Thanks to their high-quality annealed powder coating they are easy to clean. AS panelsare equipped with alkus facing and ergonomic grip profiles. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories. |
|
| AluStar | AS panels | AS-panel AL 17 | 22-086-34 | 135/ 50 | 0.68 | 20.40 | AluStar | Construction height 12 cm, frame profile width 40 mm. Two tie holes per panel height 270 cm, one tie holes per panel height 135 cm and 90 cm. Absolutely compatible with StarTec panels. The frames of AS panels are made of closed 2-chamber aluminium profiles and are torsion-proof. Thanks to their high-quality annealed powder coating they are easy to clean. AS panelsare equipped with alkus facing and ergonomic grip profiles. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories. |
|
| AluStar | AS panels | AS-panel AL 17 | 22-086-37 | 135/ 49 | 0.66 | 20.00 | AluStar | Construction height 12 cm, frame profile width 40 mm. Two tie holes per panel height 270 cm, one tie holes per panel height 135 cm and 90 cm. Absolutely compatible with StarTec panels. The frames of AS panels are made of closed 2-chamber aluminium profiles and are torsion-proof. Thanks to their high-quality annealed powder coating they are easy to clean. AS panelsare equipped with alkus facing and ergonomic grip profiles. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories. |
|
| AluStar | AS panels | AS-panel AL 17 | 22-086-46 | 135/ 45 | 0.61 | 18.90 | AluStar | Construction height 12 cm, frame profile width 40 mm. Two tie holes per panel height 270 cm, one tie holes per panel height 135 cm and 90 cm. Absolutely compatible with StarTec panels. The frames of AS panels are made of closed 2-chamber aluminium profiles and are torsion-proof. Thanks to their high-quality annealed powder coating they are easy to clean. AS panelsare equipped with alkus facing and ergonomic grip profiles. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories. |
|
| AluStar | AS panels | AS-panel AL 17 | 22-086-56 | 135/ 40 | 0.54 | 17.40 | AluStar | Construction height 12 cm, frame profile width 40 mm. Two tie holes per panel height 270 cm, one tie holes per panel height 135 cm and 90 cm. Absolutely compatible with StarTec panels. The frames of AS panels are made of closed 2-chamber aluminium profiles and are torsion-proof. Thanks to their high-quality annealed powder coating they are easy to clean. AS panelsare equipped with alkus facing and ergonomic grip profiles. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories. |
|
| AluStar | AS panels | AS-panel AL 17 | 22-086-71 | 135/ 30 | 0.41 | 14.50 | AluStar | Construction height 12 cm, frame profile width 40 mm. Two tie holes per panel height 270 cm, one tie holes per panel height 135 cm and 90 cm. Absolutely compatible with StarTec panels. The frames of AS panels are made of closed 2-chamber aluminium profiles and are torsion-proof. Thanks to their high-quality annealed powder coating they are easy to clean. AS panelsare equipped with alkus facing and ergonomic grip profiles. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories. |
|
| AluStar | AS panels | AS-panel AL 17 | 22-086-76 | 135/ 25 | 0.34 | 12.90 | AluStar | Construction height 12 cm, frame profile width 40 mm. Two tie holes per panel height 270 cm, one tie holes per panel height 135 cm and 90 cm. Absolutely compatible with StarTec panels. The frames of AS panels are made of closed 2-chamber aluminium profiles and are torsion-proof. Thanks to their high-quality annealed powder coating they are easy to clean. AS panelsare equipped with alkus facing and ergonomic grip profiles. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories. |
|
| AluStar | AS panels | AS-panel AL 17 | 22-086-81 | 135/ 24 | 0.32 | 12.60 | AluStar | Construction height 12 cm, frame profile width 40 mm. Two tie holes per panel height 270 cm, one tie holes per panel height 135 cm and 90 cm. Absolutely compatible with StarTec panels. The frames of AS panels are made of closed 2-chamber aluminium profiles and are torsion-proof. Thanks to their high-quality annealed powder coating they are easy to clean. AS panelsare equipped with alkus facing and ergonomic grip profiles. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories. |
|
| AluStar | AS panels | AS-panel AL 17 | 22-086-86 | 135/ 20 | 0.27 | 11.40 | AluStar | Construction height 12 cm, frame profile width 40 mm. Two tie holes per panel height 270 cm, one tie holes per panel height 135 cm and 90 cm. Absolutely compatible with StarTec panels. The frames of AS panels are made of closed 2-chamber aluminium profiles and are torsion-proof. Thanks to their high-quality annealed powder coating they are easy to clean. AS panelsare equipped with alkus facing and ergonomic grip profiles. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories. |
|
| AluStar | AS panels | AS-panel AL 17 | 22-087-01 | 90/ 90 | 0.81 | 21.60 | AluStar | Construction height 12 cm, frame profile width 40 mm. Two tie holes per panel height 270 cm, one tie holes per panel height 135 cm and 90 cm. Absolutely compatible with StarTec panels. The frames of AS panels are made of closed 2-chamber aluminium profiles and are torsion-proof. Thanks to their high-quality annealed powder coating they are easy to clean. AS panelsare equipped with alkus facing and ergonomic grip profiles. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories. |
|
| AluStar | AS panels | AS-panel AL 17 | 22-087-26 | 90/ 75 | 0.68 | 18.60 | AluStar | Construction height 12 cm, frame profile width 40 mm. Two tie holes per panel height 270 cm, one tie holes per panel height 135 cm and 90 cm. Absolutely compatible with StarTec panels. The frames of AS panels are made of closed 2-chamber aluminium profiles and are torsion-proof. Thanks to their high-quality annealed powder coating they are easy to clean. AS panelsare equipped with alkus facing and ergonomic grip profiles. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories. |
|
| AluStar | AS panels | AS-panel AL 17 | 22-087-46 | 90/ 55 | 0.49 | 14.60 | AluStar | Construction height 12 cm, frame profile width 40 mm. Two tie holes per panel height 270 cm, one tie holes per panel height 135 cm and 90 cm. Absolutely compatible with StarTec panels. The frames of AS panels are made of closed 2-chamber aluminium profiles and are torsion-proof. Thanks to their high-quality annealed powder coating they are easy to clean. AS panelsare equipped with alkus facing and ergonomic grip profiles. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories. |
|
| AluStar | AS panels | AS-panel AL 17 | 22-087-51 | 90/ 50 | 0.45 | 13.60 | AluStar | Construction height 12 cm, frame profile width 40 mm. Two tie holes per panel height 270 cm, one tie holes per panel height 135 cm and 90 cm. Absolutely compatible with StarTec panels. The frames of AS panels are made of closed 2-chamber aluminium profiles and are torsion-proof. Thanks to their high-quality annealed powder coating they are easy to clean. AS panelsare equipped with alkus facing and ergonomic grip profiles. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories. |
|
| AluStar | AS panels | AS-panel AL 17 | 22-087-53 | 90/ 49 | 0.44 | 13.40 | AluStar | Construction height 12 cm, frame profile width 40 mm. Two tie holes per panel height 270 cm, one tie holes per panel height 135 cm and 90 cm. Absolutely compatible with StarTec panels. The frames of AS panels are made of closed 2-chamber aluminium profiles and are torsion-proof. Thanks to their high-quality annealed powder coating they are easy to clean. AS panelsare equipped with alkus facing and ergonomic grip profiles. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories. |
|
| AluStar | AS panels | AS-panel AL 17 | 22-087-56 | 90/ 45 | 0.41 | 12.50 | AluStar | Construction height 12 cm, frame profile width 40 mm. Two tie holes per panel height 270 cm, one tie holes per panel height 135 cm and 90 cm. Absolutely compatible with StarTec panels. The frames of AS panels are made of closed 2-chamber aluminium profiles and are torsion-proof. Thanks to their high-quality annealed powder coating they are easy to clean. AS panelsare equipped with alkus facing and ergonomic grip profiles. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories. |
|
| AluStar | AS panels | AS-panel AL 17 | 22-087-61 | 90/ 40 | 0.36 | 11.50 | AluStar | Construction height 12 cm, frame profile width 40 mm. Two tie holes per panel height 270 cm, one tie holes per panel height 135 cm and 90 cm. Absolutely compatible with StarTec panels. The frames of AS panels are made of closed 2-chamber aluminium profiles and are torsion-proof. Thanks to their high-quality annealed powder coating they are easy to clean. AS panelsare equipped with alkus facing and ergonomic grip profiles. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories. |
|
| AluStar | AS panels | AS-panel AL 17 | 22-087-71 | 90/ 30 | 0.27 | 9.50 | AluStar | Construction height 12 cm, frame profile width 40 mm. Two tie holes per panel height 270 cm, one tie holes per panel height 135 cm and 90 cm. Absolutely compatible with StarTec panels. The frames of AS panels are made of closed 2-chamber aluminium profiles and are torsion-proof. Thanks to their high-quality annealed powder coating they are easy to clean. AS panelsare equipped with alkus facing and ergonomic grip profiles. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories. |
|
| AluStar | AS panels | AS-panel AL 17 | 22-087-76 | 90/ 25 | 0.23 | 8.60 | AluStar | Construction height 12 cm, frame profile width 40 mm. Two tie holes per panel height 270 cm, one tie holes per panel height 135 cm and 90 cm. Absolutely compatible with StarTec panels. The frames of AS panels are made of closed 2-chamber aluminium profiles and are torsion-proof. Thanks to their high-quality annealed powder coating they are easy to clean. AS panelsare equipped with alkus facing and ergonomic grip profiles. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories. |
|
| AluStar | AS panels | AS-panel AL 17 | 22-087-81 | 90/ 24 | 0.22 | 8.40 | AluStar | Construction height 12 cm, frame profile width 40 mm. Two tie holes per panel height 270 cm, one tie holes per panel height 135 cm and 90 cm. Absolutely compatible with StarTec panels. The frames of AS panels are made of closed 2-chamber aluminium profiles and are torsion-proof. Thanks to their high-quality annealed powder coating they are easy to clean. AS panelsare equipped with alkus facing and ergonomic grip profiles. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories. |
|
| AluStar | AS panels | AS-panel AL 17 | 22-087-86 | 90/ 20 | 0.18 | 7.60 | AluStar | Construction height 12 cm, frame profile width 40 mm. Two tie holes per panel height 270 cm, one tie holes per panel height 135 cm and 90 cm. Absolutely compatible with StarTec panels. The frames of AS panels are made of closed 2-chamber aluminium profiles and are torsion-proof. Thanks to their high-quality annealed powder coating they are easy to clean. AS panelsare equipped with alkus facing and ergonomic grip profiles. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories. |
|
| AluStar | ST Multi-purpose panel | ST-multi-purpose panel AL 17, 270/75 | 21-212-26 | 2.03 | 103.50 | AluStar | StarTec panel with perforated profiles to be used as column formwork or to concrete pilasters, stop ends, connections to existing walls, corner configurations, etc. Is used in connection with stop end fixture 23/40. |
|
|
| AluStar | ST Multi-purpose panel | ST-multi-purpose panel AL 17, 135/75 | 21-212-46 | 1.01 | 52.20 | AluStar | StarTec panel with perforated profiles to be used as column formwork or to concrete pilasters, stop ends, connections to existing walls, corner configurations, etc. Is used in connection with stop end fixture 23/40. |
|
|
| AluStar | Foundation tape | Foundation tape 50 m | 29-307-50 | 20.00 | AluStar | Galvanized. Hole spacing 50 mm; hole Ø 16 mm, 50 m. Adm. tractive force 10 kN. To be cut at hole center. Serves together with the appropriate tensioners as bottom anchoring when panels are assembled in horizontal position. |
|
||
| AluStar | Tensioner AS/ST for foundation tape | Tensioner AS/ST for foundation tape | 29-307-70 | 1.35 | AluStar | Galvanized. Connects the foundation tape to AluStar or StarTec panels and serves as bottom anchoring when panels are assembled in horizontal position. Two tensioners are required per anchoring position. |
|
||
| AluStar | Trolley for foundation tape | Trolley for foundation tape | 29-307-55 | 21.80 | AluStar | Not shown. Galvanized. Is used to transport and cut foundation tape to length. Suitable for one roll. Pneumatic wheels. | |||
| AluStar | AS inside corner AL | AS-inside corner 330/25 AL | 22-150-22 | 1.70 | 40.70 | AluStar | Aluminium with high-quality annealed powder coating. For 90° corner configurations. Side length 25 cm. With tie holes. |
|
|
| AluStar | AS inside corner AL | AS-inside corner 270/25 AL | 22-150-24 | 1.35 | 33.20 | AluStar | Aluminium with high-quality annealed powder coating. For 90° corner configurations. Side length 25 cm. With tie holes. |
|
|
| AluStar | AS inside corner AL | AS-inside corner 135/25 AL | 22-150-34 | 0.68 | 17.90 | AluStar | Aluminium with high-quality annealed powder coating. For 90° corner configurations. Side length 25 cm. With tie holes. |
|
|
| AluStar | AS inside corner AL | AS-inside corner 90/25 AL | 22-150-44 | 0.45 | 12.80 | AluStar | Aluminium with high-quality annealed powder coating. For 90° corner configurations. Side length 25 cm. With tie holes. |
|
|
| AluStar | AS/ST outside corner | AS/ST-outside corner 270 | 22-140-20 | 13.00 | AluStar | Aluminium with high-quality annealed powder coating. Provides together with ST panels and AS assembly locks a fast and stable outside corner assembly for 90° angles. |
|
||
| AluStar | AS/ST outside corner | AS/ST-outside corner 135 | 22-140-30 | 6.80 | AluStar | Aluminium with high-quality annealed powder coating. Provides together with ST panels and AS assembly locks a fast and stable outside corner assembly for 90° angles. |
|
||
| AluStar | AS/ST outside corner | AS/ST-outside corner 90 | 22-140-40 | 4.80 | AluStar | Aluminium with high-quality annealed powder coating. Provides together with ST panels and AS assembly locks a fast and stable outside corner assembly for 90° angles. |
|
||
| AluStar | Outside corner Alu(minium) | Outside corner Alu 270/5 | 22-140-25 | 0.27 | 16.10 | AluStar | Aluminium with high-quality annealed powder coating. Facing 5 cm wide on both sides, integrated chamfer strip. Provides together with EA panels EA assembly locks a fast and tight outside corner assembly for 90° angles. |
|
|
| AluStar | Outside corner Alu(minium) | Outside corner Alu 135/5 | 22-140-35 | 0.14 | 8.40 | AluStar | Aluminium with high-quality annealed powder coating. Facing 5 cm wide on both sides, integrated chamfer strip. Provides together with EA panels EA assembly locks a fast and tight outside corner assembly for 90° angles. |
|
|
| AluStar | AS hinged inside corner | AS-hinged inside corner 270/30 | 21-270-00 | 1.62 | 73.00 | AluStar | Steel construction with steel sheeting. Primed and cavity-sealed. Side length 30 cm. Adjustable angle 60°–180°. |
|
|
| AluStar | AS hinged inside corner | AS-hinged inside corner 135/30 | 21-270-10 | 0.81 | 37.00 | AluStar | Steel construction with steel sheeting. Primed and cavity-sealed. Side length 30 cm. Adjustable angle 60°–180°. |
|
|
| AluStar | AS hinged outside corner | AS-hinged outside corner 270/7.5 | 21-280-00 | 0.40 | 45.00 | AluStar | Steel construction with steel sheeting. Primed and cavity-sealed. Side length 7.5 cm. Adjustable angle 60°–180°. |
|
|
| AluStar | AS hinged outside corner | AS-hinged outside corner 135/7.5 | 21-280-10 | 0.20 | 22.00 | AluStar | Steel construction with steel sheeting. Primed and cavity-sealed. Side length 7.5 cm. Adjustable angle 60°–180°. |
|
|
| AluStar | ST stripping corner | ST stripping corner 270/25 | 21-262-10 | 1.35 | 146.00 | AluStar | Steel construction with steel sheeting. Primed and cavity-sealed. Side length 25 cm. With tie holes. When the bell-crank lever is pushed upwards with a crowbar, the corner is removed 17.5 mm away from the concrete and the formwork 35 mm away from the concrete on both sides. |
|
|
| AluStar | ST stripping corner | ST stripping corner 135/25 | 21-262-30 | 0.68 | 82.00 | AluStar | Steel construction with steel sheeting. Primed and cavity-sealed. Side length 25 cm. With tie holes. When the bell-crank lever is pushed upwards with a crowbar, the corner is removed 17.5 mm away from the concrete and the formwork 35 mm away from the concrete on both sides. |
|
|
| AluStar | Adhesive tape, red | Adhesive tape 50 m, red | 41-912-10 | 0.83 | AluStar | Not shown. Reinforced adhesive tape, red, 50 mm wide, 50 running metres. Total thickness: 270 mµ. Natural rubber adhesive on one side. PE-coated. | |||
| AluStar | Stripping support | Stripping support | 29-306-30 | 5.00 | AluStar | The stripping support is used to easily activate the stripping corner from above. Use a power screwdriver, a ratchet wrench or a spanner to activate the stripping support. The tools must have SW 27 or 30 or 36. |
|
||
| AluStar | AS radius panel | AS-radius panel 270/15 | 21-500-00 | 0.41 | 38.90 | AluStar | Steel construction with steel sheeting. Primed and cavity-sealed. Allows the AluStar and StarTec formwork to be used as polygonal formwork. |
|
|
| AluStar | AS radius panel | AS-radius panel 270/20 | 21-500-10 | 0.54 | 42.70 | AluStar | Steel construction with steel sheeting. Primed and cavity-sealed. Allows the AluStar and StarTec formwork to be used as polygonal formwork. |
|
|
| AluStar | AS radius panel | AS-radius panel 270/25 | 21-500-20 | 0.68 | 50.00 | AluStar | Steel construction with steel sheeting. Primed and cavity-sealed. Allows the AluStar and StarTec formwork to be used as polygonal formwork. |
|
|
| AluStar | AS radius panel | AS-radius panel 135/15 | 21-500-40 | 0.20 | 21.10 | AluStar | Steel construction with steel sheeting. Primed and cavity-sealed. Allows the AluStar and StarTec formwork to be used as polygonal formwork. |
|
|
| AluStar | AS radius panel | AS-radius panel 135/20 | 21-500-50 | 0.27 | 23.00 | AluStar | Steel construction with steel sheeting. Primed and cavity-sealed. Allows the AluStar and StarTec formwork to be used as polygonal formwork. |
|
|
| AluStar | AS radius panel | AS-radius panel 135/25 | 21-500-60 | 0.34 | 26.40 | AluStar | Steel construction with steel sheeting. Primed and cavity-sealed. Allows the AluStar and StarTec formwork to be used as polygonal formwork. |
|
|
| AluStar | AS tensioning bow | AS-tensioning bow | 21-500-95 | 5.40 | AluStar | Takes up the anchor load when forming polygonal constructions with radius panels. |
|
||
| AluStar | AS assembly lock | AS-assembly lock | 29-205-00 | 2.00 | AluStar | Galvanized. Tightly connects and aligns AluStar and StarTec panels. Clamping length 8 cm. |
|
||
| AluStar | Uni-assembly lock | Uni-assembly lock 22 | 29-400-85 | 3.60 | AluStar | Galvanized. For stepless compensation. Clamping length 22 cm or 28 cm. |
|
||
| AluStar | Uni-assembly lock | Uni-assembly lock 28 | 29-400-90 | 3.90 | AluStar | Galvanized. For stepless compensation. Clamping length 22 cm or 28 cm. |
|
||
| AluStar | RS-assembly lock | RS-assembly lock | 23-807-70 | 4.70 | AluStar | Galvanized, For stepless length compensation. Clamping length is 11.9 to 20.5 cm for stepless compensation. |
|
||
| AluStar | Combi-lock with coupling | Combi-lock with coupling | 29-804-60 | 3.70 | AluStar | Galvanized. Is used to attach the push-pull props at the panel joint of the wall formwork profile widths of 40 and 60 mm. Clamping length 8, 10 and 12 cm. |
|
||
| AluStar | Transition lock AF-ST/AS | Transition lock AF - ST/AS | 29-103-30 | 3.20 | AluStar | Is used as a connecting assembly lock at the joint of AF panels with ST or AS panels. Can be used on the right or left side of inside corner areas by turning the sliding part. |
|
||
| AluStar | Flange screw | Flange screw 18 | 29-401-10 | 1.10 | AluStar | Galvanized. DW thread Ø 15 mm. Is used to attach accessories, e.g. alignment rails, brace frames, push-pull props, etc. Length of thread 18 cm or 27 cm. |
|
||
| AluStar | Flange screw | Flange screw 28 | 29-401-12 | 1.23 | AluStar | Galvanized. DW thread Ø 15 mm. Is used to attach accessories, e.g. alignment rails, brace frames, push-pull props, etc. Length of thread 18 cm or 27 cm. |
|
||
| AluStar | ST aluminium filler | ST-aluminium filler 270/5 | 21-270-60 | 0.14 | 7.90 | AluStar | Aluminium with high-quality powder coating. With tie holes. For length compensation of 5 cm, especially in corners. 2 or 3 Uni-assembly locks are required for each filler. |
|
|
| AluStar | ST aluminium filler | ST-aluminium filler 135/5 | 21-270-65 | 0.07 | 4.20 | AluStar | Aluminium with high-quality powder coating. With tie holes. For length compensation of 5 cm, especially in corners. 2 or 3 Uni-assembly locks are required for each filler. |
|
|
| AluStar | ST compensation plate | ST-compensation plate 330/20 | 21-300-15 | 0.66 | 38.23 | AluStar | Steel construction with steel sheeting. Primed and cavity-sealed. Is used to compensate gaps of 8 to 20 cm and attached to the panel with 2 assembly locks. Alignment rails must be used to bridge and align the panels with the compensation plate. |
|
|
| AluStar | ST compensation plate | ST-compensation plate 270/20 | 21-300-20 | 0.54 | 30.00 | AluStar | Steel construction with steel sheeting. Primed and cavity-sealed. Is used to compensate gaps of 8 to 20 cm and attached to the panel with 2 assembly locks. Alignment rails must be used to bridge and align the panels with the compensation plate. |
|
|
| AluStar | ST compensation plate | ST-compensation plate 135/20 | 21-300-30 | 0.30 | 15.00 | AluStar | Steel construction with steel sheeting. Primed and cavity-sealed. Is used to compensate gaps of 8 to 20 cm and attached to the panel with 2 assembly locks. Alignment rails must be used to bridge and align the panels with the compensation plate. |
|
|
| AluStar | AS timber profile | AS-timber profile 270/21 | 29-200-03 | 11.00 | AluStar | Timber profile with groove. Is used for job-built fillers of 14 cm or more or to connect job-built formwork with 21 mm forming face. Is attached to the AS/ST panels with 2 AS assembly locks. Delivery and weight by pairs. |
|
||
| AluStar | AS timber profile | AS-timber profile 135/21 | 29-200-05 | 5.40 | AluStar | Timber profile with groove. Is used for job-built fillers of 14 cm or more or to connect job-built formwork with 21 mm forming face. Is attached to the AS/ST panels with 2 AS assembly locks. Delivery and weight by pairs. |
|
||
| AluStar | Corner angle 40/60 | Corner angle 40/60 | 29-402-25 | 9.50 | AluStar | Galvanized. Side lengths 40 and 60 cm. For inside and outside corners. |
|
||
| AluStar | Stop end fixture 23/40 yellow | Stop end fixture 23/40 (yellow) | 29-402-85 | 3.00 | AluStar | Yellow chromated. Is used to attach alignment rails to the panels when forming stop ends are formed. Or is used in connection with multi-purpose panels (EcoAs, StarTec) to form outer corners or abutments. Suited for the frame profiles of EcoAs and AluFix (23 mm) and AluStar/StarTec (40 mm). A flange nut 100 or an articulated flange nut 15/120 are required in addition. |
|
||
| AluStar | Stop end bracket | Stop end bracket 40/60 | 29-105-50 | 15.40 | AluStar | Galvanized. Is used to form stop ends. Stop end bracket 40/60 for wall thickness up to 40 cm and profile widths of 40 and 60 mm. Stop end bracket 2.5‘ - 60/23 for wall thickness up 75 cm (2.5‘) and profile widths of 23 mm (EcoAs) and 60 mm. |
|
||
| AluStar | Stop end bracket | Stop end bracket 23/40 | 29-105-45 | 12.20 | AluStar | Galvanized. Is used to form stop ends. Stop end bracket 40/60 for wall thickness up to 40 cm and profile widths of 40 and 60 mm. Stop end bracket 2.5‘ - 60/23 for wall thickness up 75 cm (2.5‘) and profile widths of 23 mm (EcoAs) and 60 mm. |
|
||
| AluStar | Plug D20 | Plug D20 | 29-902-63 | 0.20 | AluStar | Is used to close unused tie holes (AluFix, EcoAs, AluFix, AluStar and StarTec). |
|
||
| AluStar | Plug D20 | Plug D20 without imprint | 29-902-62 | 0.20 | AluStar | Is used to close unused tie holes (AluFix, EcoAs, AluFix, AluStar and StarTec). |
|
||
| AluStar | Alignment rail | AS-alignment rail 50, galv. | 29-201-73 | 5.20 | AluStar | Galvanized. Is used to brace panel joints for crane ganging, bridge problem areas, brace compensation areas and build stop ends with stop end fixtures. Is attached to the formwork with flange screws. |
|
||
| AluStar | Alignment rail | AS-alignment rail 125, galv. | 29-201-75 | 10.50 | AluStar | Galvanized. Is used to brace panel joints for crane ganging, bridge problem areas, brace compensation areas and build stop ends with stop end fixtures. Is attached to the formwork with flange screws. |
|
||
| AluStar | Alignment rail | AS-alignment rail 200, galv. | 29-201-80 | 19.00 | AluStar | Galvanized. Is used to brace panel joints for crane ganging, bridge problem areas, brace compensation areas and build stop ends with stop end fixtures. Is attached to the formwork with flange screws. |
|
||
| AluStar | Tie rod DW 15/90 | Tie rod DW 15/90 | 29-900-80 | 1.25 | AluStar | Uncoated, not weldable. DIN 18216. DW thread Ø 15 mm. Is used to tie panels of double-sided formwork. Adm. load 90 kN. |
|
||
| AluStar | Tie wrench DW15/DW20 | Tie wrench DW15/DW20 | 29-901-39 | 4.50 | AluStar | Made of steel, galvanized. Used to screw in, screw out and hold tie rods DW15 and DW20; length 400 mm. |
|
||
| AluStar | Tie rod holder | Tie rod fixture Ø35 | 29-927-05 | 1.20 | AluStar | Galvanised. To hold DW tie rods with articulated flange nut, XT tie rods or XT taper ties. Can be used with horizontal or vertical MEVA wall formwork panels. |
|
||
| AluStar | Articulated flange nut 15/120 | Articulated flange nut 15/120 (SW 27) | 29-900-10 | 1.81 | AluStar | Forged, galvanized. DIN 18216. DW thread Ø 15 mm, plate Ø 120 mm, max. inclination 10°, SW 27. Max. load capacity 90 kN. Reduces wear of panel coating. |
|
||
| AluStar | Articulated flange nut 15/120 | Articulated flange nut AF - ST/AS | 29-900-18 | 2.32 | AluStar | Forged, galvanized. DIN 18216. DW thread Ø 15 mm, plate Ø 120 mm, max. inclination 10°, SW 27. Max. load capacity 90 kN. Reduces wear of panel coating. |
|
||
| AluStar | Spanner SW 27 | Spanner SW 27 | 29-800-10 | 1.80 | AluStar | Inset yellow chromated. Spanner width (SW) 27 mm. Is used to tighten and loosen flange nuts 100, articulated flange nuts 15/120 and flange screws. |
|
||
| AluStar | Uni-tie claw | Uni-tie claw | 29-901-41 | 1.52 | AluStar | Galvanized. Permits tieing directly above or beside the panels. Is suited for panels with profile widths of 40 and 60 mm. |
|
||
| AluStar | AS crane hook | AS-crane hook | 29-203-89 | 6.00 | AluStar | Is used to move panels. Self-locking. Load capacity: 15 kN (1.5 tons). Always 2 crane hooks required per gang. For use and safety check see the Operating Instructions. |
|
||
| AluStar | Brace frame 250 | Brace frame 250 with formwork-prop connector | 29-109-20 | 31.50 | AluStar | Galvanized. Available with formwork-prop connector. Is used to align and brace the formwork. Consists of a push-pull prop R 250 (190–320 cm), a brace SRL 120 (90–150 cm) and a double-jointed footplate.The formwork-prop connectors are attached to the formwork with flange screws 18. |
|
||
| AluStar | Formwork-prop connector | Formwork-prop connector | 29-804-85 | 1.65 | AluStar | Galvanized. Connects braces, brace frames and push-pull props (max. Ø 48 mm) to the multi-function profile with a flange screw 18. Delivery includes head bolt 16/90 and cotter pin 4. |
|
||
| AluStar | Double-jointed foot plate | Double-jointed foot plate (RS Ø to 57 mm) | 29-402-32 | 4.00 | AluStar | Galvanized. Delivery includes head bolt 16/90 and cotter pin 4. Serves as foot plate for brace frames 250 and as connector for braces and push-pull props up to Ø 57 mm. |
|
||
| AluStar | Walkway bracket | Walkway bracket 90 (yellow), galv. | 29-106-00 | 10.30 | AluStar | Galvanized, yellow, pluggable. Is used as working and safety scaffold. Is attached to the multi-function profile and secured to the multi-function profile below with a flange screw 18. The planking can be mounted to the brackets. Working width approx. 90 cm. MEVA Guard-railing post is also required. Bracket spacing depends on type of planking (DIN 4420). |
|
||
| AluStar | Side railing | Side railing 90/100, galv. | 29-108-20 | 12.30 | AluStar | Galvanized. Is plugged into the walkway bracket. |
|
||
| AluStar | Side railing | Side railing 125/100, galv. | 29-108-30 | 13.80 | AluStar | Galvanized. Is plugged into the walkway bracket. |
|
||
| AluStar | Guard-railing post | Guard-railing post 100 | 29-106-75 | 3.70 | AluStar | Galvanized. Is plugged into the walkway bracket. |
|
||
| AluStar | Guard-railing post | Guard-railing post 140 | 29-106-85 | 4.70 | AluStar | Galvanized. Is plugged into the walkway bracket. |
|
||
| AluStar | Guard-railing post 48 | Guard-railing post 48/120 (UK) | 29-106-80 | 5.50 | AluStar | Galvanized. With manifold to be plugged into the walkway bracket and with 48 mm Ø tube to attach scaffold couplers. |
|
||
| AluStar | Guard-railing post 48 | Guard-railing post 48/134 | 29-920-80 | 5.45 | AluStar | Galvanized. With manifold to be plugged into the walkway bracket and with 48 mm Ø tube to attach scaffold couplers. |
|
||
| AluStar | Tilting bracket 40/60 | Tilting bracket 40/60 | 29-920-82 | 4.95 | AluStar | Galvanised. Used to attach MEVA guardrailing posts to create a fall protection system. It can be set up vertically to facilitate the installation of safety meshes or railing boards or inclined by 15° to create a larger working area. Secured with a wedge to the frame profile of 40 and 60 mm. |
|
||
| AluStar | Scaffold tube | Scaffold tube 48/200 | 29-412-23 | 9.40 | AluStar | Galvanized. Is used as hand-rail in combination with guard-railing post 48. |
|
||
| AluStar | Scaffold tube | Scaffold tube 48/300 | 29-412-26 | 14.10 | AluStar | Galvanized. Is used as hand-rail in combination with guard-railing post 48. |
|
||
| AluStar | Scaffold tube | Scaffold tube 48/400 | 29-412-27 | 18.80 | AluStar | Galvanized. Is used as hand-rail in combination with guard-railing post 48. |
|
||
| AluStar | Scaffold tube | Scaffold tube 48/500 | 29-412-25 | 23.50 | AluStar | Galvanized. Is used as hand-rail in combination with guard-railing post 48. |
|
||
| AluStar | Scaffold tube | Scaffold tube 48/600 | 29-412-28 | 28.20 | AluStar | Galvanized. Is used as hand-rail in combination with guard-railing post 48. |
|
||
| AluStar | Swivel-joint coupler 48/48 | Swivel-joint coupler 48/48 | 29-412-52 | 1.20 | AluStar | Galvanized. Connects 2 scaffold tubes with Ø 48.3 mm at any angle required. |
|
||
| AluStar | Transport angle 12 | Transport angle 12 | 29-305-20 | 16.50 | AluStar | Is used to stack and transport 5 to 12 frame formwork panels with a construction height of 12 cm and 12 cm hole distance. Max. load capacity is 10 kN per angle. For safety reasons consider 20 kN as max. capacity for the whole stack. It is recommended to use 2 foldable angles and 2 angles of the rigid type for each stack. |
|
||
| AluStar | Transport angle 12 | Transport angle 12, rigid type | 29-305-25 | 12.70 | AluStar | Is used to stack and transport 5 to 12 frame formwork panels with a construction height of 12 cm and 12 cm hole distance. Max. load capacity is 10 kN per angle. For safety reasons consider 20 kN as max. capacity for the whole stack. It is recommended to use 2 foldable angles and 2 angles of the rigid type for each stack. |
|
||
| AluStar | Safety plug AS/ST stacks, black | Safety plug AS/ST stacks, black | 40-131-10 | 19.00 | AluStar | Plastic, black. Secures stacked AluStar and StarTec panels. |
|
||
| StarTec | ST panels | ST-panel AL 20 | 21-217-01 | 330/270 | 8.91 | 543.00 | StarTec | Construction height 12 cm, frame profile width 40 mm. Three tie holes per panel height 330 cm, two tie holes per panel height 270 cm, one tie hole per panel height 135 cm and 90 cm. Absolutely compatible with AluStar panels. The frames of ST panel frames are made of closed steel profiles and are torsion-proof. ST panels are equipped with alkus facing. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles permit an easy, fast and safe attachment of accessories. |
|
| StarTec | ST panels | ST-panel AL 20 | 21-217-06 | 330/135 | 4.46 | 253.00 | StarTec | Construction height 12 cm, frame profile width 40 mm. Three tie holes per panel height 330 cm, two tie holes per panel height 270 cm, one tie hole per panel height 135 cm and 90 cm. Absolutely compatible with AluStar panels. The frames of ST panel frames are made of closed steel profiles and are torsion-proof. ST panels are equipped with alkus facing. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles permit an easy, fast and safe attachment of accessories. |
|
| StarTec | ST panels | ST-panel AL 17 | 21-217-11 | 330/ 90 | 2.97 | 125.50 | StarTec | Construction height 12 cm, frame profile width 40 mm. Three tie holes per panel height 330 cm, two tie holes per panel height 270 cm, one tie hole per panel height 135 cm and 90 cm. Absolutely compatible with AluStar panels. The frames of ST panel frames are made of closed steel profiles and are torsion-proof. ST panels are equipped with alkus facing. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles permit an easy, fast and safe attachment of accessories. |
|
| StarTec | ST panels | ST-panel AL 17 | 21-217-26 | 330/ 75 | 2.48 | 112.00 | StarTec | Construction height 12 cm, frame profile width 40 mm. Three tie holes per panel height 330 cm, two tie holes per panel height 270 cm, one tie hole per panel height 135 cm and 90 cm. Absolutely compatible with AluStar panels. The frames of ST panel frames are made of closed steel profiles and are torsion-proof. ST panels are equipped with alkus facing. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles permit an easy, fast and safe attachment of accessories. |
|
| StarTec | ST panels | ST-panel AL 17 | 21-217-46 | 330/ 55 | 1.81 | 93.50 | StarTec | Construction height 12 cm, frame profile width 40 mm. Three tie holes per panel height 330 cm, two tie holes per panel height 270 cm, one tie hole per panel height 135 cm and 90 cm. Absolutely compatible with AluStar panels. The frames of ST panel frames are made of closed steel profiles and are torsion-proof. ST panels are equipped with alkus facing. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles permit an easy, fast and safe attachment of accessories. |
|
| StarTec | ST panels | ST-panel AL 17 | 21-217-49 | 330/ 50 | 1.65 | 88.00 | StarTec | Construction height 12 cm, frame profile width 40 mm. Three tie holes per panel height 330 cm, two tie holes per panel height 270 cm, one tie hole per panel height 135 cm and 90 cm. Absolutely compatible with AluStar panels. The frames of ST panel frames are made of closed steel profiles and are torsion-proof. ST panels are equipped with alkus facing. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles permit an easy, fast and safe attachment of accessories. |
|
| StarTec | ST panels | ST-panel AL 17 | 21-217-71 | 330/ 30 | 0.99 | 62.00 | StarTec | Construction height 12 cm, frame profile width 40 mm. Three tie holes per panel height 330 cm, two tie holes per panel height 270 cm, one tie hole per panel height 135 cm and 90 cm. Absolutely compatible with AluStar panels. The frames of ST panel frames are made of closed steel profiles and are torsion-proof. ST panels are equipped with alkus facing. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles permit an easy, fast and safe attachment of accessories. |
|
| StarTec | ST panels | ST-panel AL 17 | 21-217-76 | 330/ 25 | 0.82 | 58.00 | StarTec | Construction height 12 cm, frame profile width 40 mm. Three tie holes per panel height 330 cm, two tie holes per panel height 270 cm, one tie hole per panel height 135 cm and 90 cm. Absolutely compatible with AluStar panels. The frames of ST panel frames are made of closed steel profiles and are torsion-proof. ST panels are equipped with alkus facing. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles permit an easy, fast and safe attachment of accessories. |
|
| StarTec | ST panels | ST-panel AL 20 | 21-200-03 | 270/240 | 6.48 | 388.00 | StarTec | Construction height 12 cm, frame profile width 40 mm. Three tie holes per panel height 330 cm, two tie holes per panel height 270 cm, one tie hole per panel height 135 cm and 90 cm. Absolutely compatible with AluStar panels. The frames of ST panel frames are made of closed steel profiles and are torsion-proof. ST panels are equipped with alkus facing. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles permit an easy, fast and safe attachment of accessories. |
|
| StarTec | ST panels | ST-panel AL 20 | 21-200-06 | 270/135 | 3.65 | 206.50 | StarTec | Construction height 12 cm, frame profile width 40 mm. Three tie holes per panel height 330 cm, two tie holes per panel height 270 cm, one tie hole per panel height 135 cm and 90 cm. Absolutely compatible with AluStar panels. The frames of ST panel frames are made of closed steel profiles and are torsion-proof. ST panels are equipped with alkus facing. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles permit an easy, fast and safe attachment of accessories. |
|
| StarTec | ST panels | ST-panel AL 17 | 21-200-11 | 270/ 90 | 2.43 | 103.40 | StarTec | Construction height 12 cm, frame profile width 40 mm. Three tie holes per panel height 330 cm, two tie holes per panel height 270 cm, one tie hole per panel height 135 cm and 90 cm. Absolutely compatible with AluStar panels. The frames of ST panel frames are made of closed steel profiles and are torsion-proof. ST panels are equipped with alkus facing. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles permit an easy, fast and safe attachment of accessories. |
|
| StarTec | ST panels | ST-panel AL 17 | 21-200-26 | 270/ 75 | 2.03 | 90.90 | StarTec | Construction height 12 cm, frame profile width 40 mm. Three tie holes per panel height 330 cm, two tie holes per panel height 270 cm, one tie hole per panel height 135 cm and 90 cm. Absolutely compatible with AluStar panels. The frames of ST panel frames are made of closed steel profiles and are torsion-proof. ST panels are equipped with alkus facing. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles permit an easy, fast and safe attachment of accessories. |
|
| StarTec | ST panels | ST-panel AL 17 | 21-200-46 | 270/ 55 | 1.49 | 72.80 | StarTec | Construction height 12 cm, frame profile width 40 mm. Three tie holes per panel height 330 cm, two tie holes per panel height 270 cm, one tie hole per panel height 135 cm and 90 cm. Absolutely compatible with AluStar panels. The frames of ST panel frames are made of closed steel profiles and are torsion-proof. ST panels are equipped with alkus facing. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles permit an easy, fast and safe attachment of accessories. |
|
| StarTec | ST panels | ST-panel AL 17 | 21-200-49 | 270/ 50 | 1.35 | 67.90 | StarTec | Construction height 12 cm, frame profile width 40 mm. Three tie holes per panel height 330 cm, two tie holes per panel height 270 cm, one tie hole per panel height 135 cm and 90 cm. Absolutely compatible with AluStar panels. The frames of ST panel frames are made of closed steel profiles and are torsion-proof. ST panels are equipped with alkus facing. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles permit an easy, fast and safe attachment of accessories. |
|
| StarTec | ST panels | ST-panel AL 17 | 21-200-52 | 270/ 49 | 1.32 | 67.10 | StarTec | Construction height 12 cm, frame profile width 40 mm. Three tie holes per panel height 330 cm, two tie holes per panel height 270 cm, one tie hole per panel height 135 cm and 90 cm. Absolutely compatible with AluStar panels. The frames of ST panel frames are made of closed steel profiles and are torsion-proof. ST panels are equipped with alkus facing. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles permit an easy, fast and safe attachment of accessories. |
|
| StarTec | ST panels | ST-panel AL 17 | 21-200-56 | 270/ 45 | 1.22 | 64.00 | StarTec | Construction height 12 cm, frame profile width 40 mm. Three tie holes per panel height 330 cm, two tie holes per panel height 270 cm, one tie hole per panel height 135 cm and 90 cm. Absolutely compatible with AluStar panels. The frames of ST panel frames are made of closed steel profiles and are torsion-proof. ST panels are equipped with alkus facing. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles permit an easy, fast and safe attachment of accessories. |
|
| StarTec | ST panels | ST-panel AL 17 | 21-200-61 | 270/ 40 | 1.08 | 60.20 | StarTec | Construction height 12 cm, frame profile width 40 mm. Three tie holes per panel height 330 cm, two tie holes per panel height 270 cm, one tie hole per panel height 135 cm and 90 cm. Absolutely compatible with AluStar panels. The frames of ST panel frames are made of closed steel profiles and are torsion-proof. ST panels are equipped with alkus facing. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles permit an easy, fast and safe attachment of accessories. |
|
| StarTec | ST panels | ST-panel AL 17 | 21-200-71 | 270/ 30 | 0.81 | 48.40 | StarTec | Construction height 12 cm, frame profile width 40 mm. Three tie holes per panel height 330 cm, two tie holes per panel height 270 cm, one tie hole per panel height 135 cm and 90 cm. Absolutely compatible with AluStar panels. The frames of ST panel frames are made of closed steel profiles and are torsion-proof. ST panels are equipped with alkus facing. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles permit an easy, fast and safe attachment of accessories. |
|
| StarTec | ST panels | ST-panel AL 17 | 21-200-76 | 270/ 25 | 0.68 | 45.70 | StarTec | Construction height 12 cm, frame profile width 40 mm. Three tie holes per panel height 330 cm, two tie holes per panel height 270 cm, one tie hole per panel height 135 cm and 90 cm. Absolutely compatible with AluStar panels. The frames of ST panel frames are made of closed steel profiles and are torsion-proof. ST panels are equipped with alkus facing. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles permit an easy, fast and safe attachment of accessories. |
|
| StarTec | ST panels | ST-panel AL 17 | 21-200-78 | 270/ 24 | 0.65 | 44.90 | StarTec | Construction height 12 cm, frame profile width 40 mm. Three tie holes per panel height 330 cm, two tie holes per panel height 270 cm, one tie hole per panel height 135 cm and 90 cm. Absolutely compatible with AluStar panels. The frames of ST panel frames are made of closed steel profiles and are torsion-proof. ST panels are equipped with alkus facing. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles permit an easy, fast and safe attachment of accessories. |
|
| StarTec | ST panels | ST-panel AL 17 | 21-200-81 | 270/ 20 | 0.54 | 41.40 | StarTec | Construction height 12 cm, frame profile width 40 mm. Three tie holes per panel height 330 cm, two tie holes per panel height 270 cm, one tie hole per panel height 135 cm and 90 cm. Absolutely compatible with AluStar panels. The frames of ST panel frames are made of closed steel profiles and are torsion-proof. ST panels are equipped with alkus facing. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles permit an easy, fast and safe attachment of accessories. |
|
| StarTec | ST panels | ST-panel AL 17 | 21-210-06 | 135/135 | 1.82 | 74.70 | StarTec | Construction height 12 cm, frame profile width 40 mm. Three tie holes per panel height 330 cm, two tie holes per panel height 270 cm, one tie hole per panel height 135 cm and 90 cm. Absolutely compatible with AluStar panels. The frames of ST panel frames are made of closed steel profiles and are torsion-proof. ST panels are equipped with alkus facing. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles permit an easy, fast and safe attachment of accessories. |
|
| StarTec | ST panels | ST-panel AL 17 | 21-210-11 | 135/ 90 | 1.22 | 53.60 | StarTec | Construction height 12 cm, frame profile width 40 mm. Three tie holes per panel height 330 cm, two tie holes per panel height 270 cm, one tie hole per panel height 135 cm and 90 cm. Absolutely compatible with AluStar panels. The frames of ST panel frames are made of closed steel profiles and are torsion-proof. ST panels are equipped with alkus facing. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles permit an easy, fast and safe attachment of accessories. |
|
| StarTec | ST panels | ST-panel AL 17 | 21-210-26 | 135/ 75 | 1.01 | 47.30 | StarTec | Construction height 12 cm, frame profile width 40 mm. Three tie holes per panel height 330 cm, two tie holes per panel height 270 cm, one tie hole per panel height 135 cm and 90 cm. Absolutely compatible with AluStar panels. The frames of ST panel frames are made of closed steel profiles and are torsion-proof. ST panels are equipped with alkus facing. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles permit an easy, fast and safe attachment of accessories. |
|
| StarTec | ST panels | ST-panel AL 17 | 21-210-46 | 135/ 55 | 0.74 | 38.60 | StarTec | Construction height 12 cm, frame profile width 40 mm. Three tie holes per panel height 330 cm, two tie holes per panel height 270 cm, one tie hole per panel height 135 cm and 90 cm. Absolutely compatible with AluStar panels. The frames of ST panel frames are made of closed steel profiles and are torsion-proof. ST panels are equipped with alkus facing. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles permit an easy, fast and safe attachment of accessories. |
|
| StarTec | ST panels | ST-panel AL 17 | 21-210-49 | 135/ 50 | 0.68 | 36.00 | StarTec | Construction height 12 cm, frame profile width 40 mm. Three tie holes per panel height 330 cm, two tie holes per panel height 270 cm, one tie hole per panel height 135 cm and 90 cm. Absolutely compatible with AluStar panels. The frames of ST panel frames are made of closed steel profiles and are torsion-proof. ST panels are equipped with alkus facing. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles permit an easy, fast and safe attachment of accessories. |
|
| StarTec | ST panels | ST-panel AL 17 | 21-210-52 | 135/ 49 | 0.66 | 35.80 | StarTec | Construction height 12 cm, frame profile width 40 mm. Three tie holes per panel height 330 cm, two tie holes per panel height 270 cm, one tie hole per panel height 135 cm and 90 cm. Absolutely compatible with AluStar panels. The frames of ST panel frames are made of closed steel profiles and are torsion-proof. ST panels are equipped with alkus facing. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles permit an easy, fast and safe attachment of accessories. |
|
| StarTec | ST panels | ST-panel AL 17 | 21-210-56 | 135/ 45 | 0.61 | 33.90 | StarTec | Construction height 12 cm, frame profile width 40 mm. Three tie holes per panel height 330 cm, two tie holes per panel height 270 cm, one tie hole per panel height 135 cm and 90 cm. Absolutely compatible with AluStar panels. The frames of ST panel frames are made of closed steel profiles and are torsion-proof. ST panels are equipped with alkus facing. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles permit an easy, fast and safe attachment of accessories. |
|
| StarTec | ST panels | ST-panel AL 17 | 21-210-61 | 135/ 40 | 0.54 | 31.00 | StarTec | Construction height 12 cm, frame profile width 40 mm. Three tie holes per panel height 330 cm, two tie holes per panel height 270 cm, one tie hole per panel height 135 cm and 90 cm. Absolutely compatible with AluStar panels. The frames of ST panel frames are made of closed steel profiles and are torsion-proof. ST panels are equipped with alkus facing. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles permit an easy, fast and safe attachment of accessories. |
|
| StarTec | ST panels | ST-panel AL 17 | 21-210-71 | 135/ 30 | 0.41 | 26.70 | StarTec | Construction height 12 cm, frame profile width 40 mm. Three tie holes per panel height 330 cm, two tie holes per panel height 270 cm, one tie hole per panel height 135 cm and 90 cm. Absolutely compatible with AluStar panels. The frames of ST panel frames are made of closed steel profiles and are torsion-proof. ST panels are equipped with alkus facing. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles permit an easy, fast and safe attachment of accessories. |
|
| StarTec | ST panels | ST-panel AL 17 | 21-210-76 | 135/ 25 | 0.34 | 25.00 | StarTec | Construction height 12 cm, frame profile width 40 mm. Three tie holes per panel height 330 cm, two tie holes per panel height 270 cm, one tie hole per panel height 135 cm and 90 cm. Absolutely compatible with AluStar panels. The frames of ST panel frames are made of closed steel profiles and are torsion-proof. ST panels are equipped with alkus facing. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles permit an easy, fast and safe attachment of accessories. |
|
| StarTec | ST panels | ST-panel AL 17 | 21-210-78 | 135/ 24 | 0.32 | 24.40 | StarTec | Construction height 12 cm, frame profile width 40 mm. Three tie holes per panel height 330 cm, two tie holes per panel height 270 cm, one tie hole per panel height 135 cm and 90 cm. Absolutely compatible with AluStar panels. The frames of ST panel frames are made of closed steel profiles and are torsion-proof. ST panels are equipped with alkus facing. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles permit an easy, fast and safe attachment of accessories. |
|
| StarTec | ST panels | ST-panel AL 17 | 21-210-81 | 135/ 20 | 0.27 | 21.10 | StarTec | Construction height 12 cm, frame profile width 40 mm. Three tie holes per panel height 330 cm, two tie holes per panel height 270 cm, one tie hole per panel height 135 cm and 90 cm. Absolutely compatible with AluStar panels. The frames of ST panel frames are made of closed steel profiles and are torsion-proof. ST panels are equipped with alkus facing. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles permit an easy, fast and safe attachment of accessories. |
|
| StarTec | ST panels | ST-panel AL 17 | 21-211-11 | 90/ 90 | 0.81 | 39.30 | StarTec | Construction height 12 cm, frame profile width 40 mm. Three tie holes per panel height 330 cm, two tie holes per panel height 270 cm, one tie hole per panel height 135 cm and 90 cm. Absolutely compatible with AluStar panels. The frames of ST panel frames are made of closed steel profiles and are torsion-proof. ST panels are equipped with alkus facing. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles permit an easy, fast and safe attachment of accessories. |
|
| StarTec | ST panels | ST-panel AL 17 | 21-211-26 | 90/ 75 | 0.68 | 34.60 | StarTec | Construction height 12 cm, frame profile width 40 mm. Three tie holes per panel height 330 cm, two tie holes per panel height 270 cm, one tie hole per panel height 135 cm and 90 cm. Absolutely compatible with AluStar panels. The frames of ST panel frames are made of closed steel profiles and are torsion-proof. ST panels are equipped with alkus facing. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles permit an easy, fast and safe attachment of accessories. |
|
| StarTec | ST panels | ST-panel AL 17 | 21-211-46 | 90/ 55 | 0.50 | 28.30 | StarTec | Construction height 12 cm, frame profile width 40 mm. Three tie holes per panel height 330 cm, two tie holes per panel height 270 cm, one tie hole per panel height 135 cm and 90 cm. Absolutely compatible with AluStar panels. The frames of ST panel frames are made of closed steel profiles and are torsion-proof. ST panels are equipped with alkus facing. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles permit an easy, fast and safe attachment of accessories. |
|
| StarTec | ST panels | ST-panel AL 17 | 21-211-49 | 90/ 50 | 0.45 | 26.00 | StarTec | Construction height 12 cm, frame profile width 40 mm. Three tie holes per panel height 330 cm, two tie holes per panel height 270 cm, one tie hole per panel height 135 cm and 90 cm. Absolutely compatible with AluStar panels. The frames of ST panel frames are made of closed steel profiles and are torsion-proof. ST panels are equipped with alkus facing. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles permit an easy, fast and safe attachment of accessories. |
|
| StarTec | ST panels | ST-panel AL 17 | 21-211-76 | 90/ 25 | 0.23 | 18.10 | StarTec | Construction height 12 cm, frame profile width 40 mm. Three tie holes per panel height 330 cm, two tie holes per panel height 270 cm, one tie hole per panel height 135 cm and 90 cm. Absolutely compatible with AluStar panels. The frames of ST panel frames are made of closed steel profiles and are torsion-proof. ST panels are equipped with alkus facing. All-around grooves and AS assembly locks guarantee a tight and perfectly aligned stepless panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles permit an easy, fast and safe attachment of accessories. |
|
| StarTec | ST panel ... /240 AL20 | ST-panel AL 20 | 21-215-00 | 135/240 | 3.24 | 221.00 | StarTec | Suited to stack ST-panels 270/240 at top or at bottom. |
|
| StarTec | ST panel ... /240 AL20 | ST-panel AL 20 | 21-215-60 | 75/240 | 1.80 | 129.10 | StarTec | Suited to stack ST-panels 270/240 at top or at bottom. |
|
| StarTec | ST panel ... /240 AL20 | ST Panel AL 20 | 21-215-65 | 90/240 | 2.16 | 153.10 | StarTec | Suited to stack ST-panels 270/240 at top or at bottom. |
|
| StarTec | ST multi-purpose panel AL 17 | ST-multi-purpose panel AL 17, 270/75 | 21-212-26 | 2.03 | 103.50 | StarTec | StarTec panel with multi-adjustment profiles. Usable as column formwork or to concrete pilasters, stop ends, connections to existing walls, corner configurations, etc. Is used with stop end fixture 23/40. |
|
|
| StarTec | ST multi-purpose panel AL 17 | ST-multi-purpose panel AL 17, 135/75 | 21-212-46 | 1.01 | 52.20 | StarTec | StarTec panel with multi-adjustment profiles. Usable as column formwork or to concrete pilasters, stop ends, connections to existing walls, corner configurations, etc. Is used with stop end fixture 23/40. |
|
|
| StarTec | StarTec XT AL | StarTec XT AL | 21-202-03 | 270/240 | 6.48 | 405.60 | StarTec | Steel, hot-dip galvanised with surface treatment. Frame profile height 12 cm, profile depth 4 cm. Equipped with alkus AL 20 as standard. Seven cross stiffeners (panel width 240 cm), five cross stiffeners (panel widths from 90 to 45 cm), three cross stiffeners (panel width 30 cm), of which three as multi-function profiles with welded-in DW nut. Two internal combination tie holes with rotating body for each panel height. |
|
| StarTec | StarTec XT AL | StarTec XT AL | 21-202-11 | 270/ 90 | 2.43 | 116.00 | StarTec | Steel, hot-dip galvanised with surface treatment. Frame profile height 12 cm, profile depth 4 cm. Equipped with alkus AL 20 as standard. Seven cross stiffeners (panel width 240 cm), five cross stiffeners (panel widths from 90 to 45 cm), three cross stiffeners (panel width 30 cm), of which three as multi-function profiles with welded-in DW nut. Two internal combination tie holes with rotating body for each panel height. |
|
| StarTec | StarTec XT AL | StarTec XT AL | 21-202-41 | 270/ 60 | 1.62 | 86.95 | StarTec | Steel, hot-dip galvanised with surface treatment. Frame profile height 12 cm, profile depth 4 cm. Equipped with alkus AL 20 as standard. Seven cross stiffeners (panel width 240 cm), five cross stiffeners (panel widths from 90 to 45 cm), three cross stiffeners (panel width 30 cm), of which three as multi-function profiles with welded-in DW nut. Two internal combination tie holes with rotating body for each panel height. |
|
| StarTec | StarTec XT AL | StarTec XT AL | 21-202-53 | 270/ 49 | 1.32 | 76.25 | StarTec | Steel, hot-dip galvanised with surface treatment. Frame profile height 12 cm, profile depth 4 cm. Equipped with alkus AL 20 as standard. Seven cross stiffeners (panel width 240 cm), five cross stiffeners (panel widths from 90 to 45 cm), three cross stiffeners (panel width 30 cm), of which three as multi-function profiles with welded-in DW nut. Two internal combination tie holes with rotating body for each panel height. |
|
| StarTec | StarTec XT AL | StarTec XT AL | 21-202-56 | 270/ 45 | 1.22 | 73.80 | StarTec | Steel, hot-dip galvanised with surface treatment. Frame profile height 12 cm, profile depth 4 cm. Equipped with alkus AL 20 as standard. Seven cross stiffeners (panel width 240 cm), five cross stiffeners (panel widths from 90 to 45 cm), three cross stiffeners (panel width 30 cm), of which three as multi-function profiles with welded-in DW nut. Two internal combination tie holes with rotating body for each panel height. |
|
| StarTec | StarTec XT AL | StarTec XT AL | 21-202-71 | 270/ 30 | 0.81 | 60.10 | StarTec | Steel, hot-dip galvanised with surface treatment. Frame profile height 12 cm, profile depth 4 cm. Equipped with alkus AL 20 as standard. Seven cross stiffeners (panel width 240 cm), five cross stiffeners (panel widths from 90 to 45 cm), three cross stiffeners (panel width 30 cm), of which three as multi-function profiles with welded-in DW nut. Two internal combination tie holes with rotating body for each panel height. |
|
| StarTec | Foundation tape | Foundation tape 50 m | 29-307-50 | 20.00 | StarTec | Galvanized. Hole spacing 50 mm; hole Ø 16 mm, 50 m. Adm. tractive force 10 kN. To be cut at hole center. Serves together with the appropriate tensioners as bottom anchoring when panels are assembled in horizontal position. |
|
||
| StarTec | Tensioner AS/ST for foundation tape | Tensioner AS/ST for foundation tape | 29-307-70 | 1.35 | StarTec | Galvanized. Connects the foundation tape to AluStar or StarTec panels and serves as bottom anchoring when panels are assembled in horizontal position. Two tensioners are required per anchoring position. |
|
||
| StarTec | Trolley for foundation tape | Trolley for foundation tape | 29-307-55 | 21.80 | StarTec | Not shown. Galvanized. Is used to transport and cut foundation tape to length. Suitable for one roll. Pneumatic wheels. | |||
| StarTec | ST panel 270/45 with concreting window | ST-panel 270/45 AL17 with concreting window | 21-213-60 | 1.22 | 75.00 | StarTec | Is used to control the pouring process when control is not possible from above. |
|
|
| StarTec | ST panel AL 17, 270/45 with filling nozzle | ST-panel 270/45 AL17 with filling nozzle | 21-213-55 | 1.22 | 73.00 | StarTec | Is used when concrete cannot be poured from above, e.g. tunnel formwork. Connection with a manual gate valve. Operating pressure: 20 bar. |
|
|
| StarTec | ST panel AL 17, 270/45 with filling nozzle | Manual gate valve SK 100 - 4½ | 29-914-50 | 19.00 | StarTec | Is used when concrete cannot be poured from above, e.g. tunnel formwork. Connection with a manual gate valve. Operating pressure: 20 bar. |
|
||
| StarTec | ST panel AL 17, 270/45 with filling nozzle | Lever coupling SK-H DN 100 - 4½ | 29-207-60 | 3.80 | StarTec | Is used when concrete cannot be poured from above, e.g. tunnel formwork. Connection with a manual gate valve. Operating pressure: 20 bar. |
|
||
| StarTec | ST panel AL 17, 270/45 with filling nozzle | Filling nozzle cleaner SK 100/800 | 29-207-50 | 7.20 | StarTec | Is used when concrete cannot be poured from above, e.g. tunnel formwork. Connection with a manual gate valve. Operating pressure: 20 bar. |
|
||
| StarTec | ST panel AL 17, 270/45 with filling nozzle | Sealing washer A SK 100 - 4½ | 62-031-55 | 0.10 | StarTec | Is used when concrete cannot be poured from above, e.g. tunnel formwork. Connection with a manual gate valve. Operating pressure: 20 bar. |
|
||
| StarTec | ST panel AL 17, 270/45 with filling nozzle | Manual gate valve SK 125 - 5½ | 29-914-45 | 15.60 | StarTec | Is used when concrete cannot be poured from above, e.g. tunnel formwork. Connection with a manual gate valve. Operating pressure: 20 bar. |
|
||
| StarTec | ST panel AL 17, 270/45 with filling nozzle | Lever coupling SK-H DN 125 - 5½ | 29-207-65 | 5.10 | StarTec | Is used when concrete cannot be poured from above, e.g. tunnel formwork. Connection with a manual gate valve. Operating pressure: 20 bar. |
|
||
| StarTec | ST panel AL 17, 270/45 with filling nozzle | Filling nozzle cleaner SK 125/800 | 29-207-55 | 9.60 | StarTec | Is used when concrete cannot be poured from above, e.g. tunnel formwork. Connection with a manual gate valve. Operating pressure: 20 bar. |
|
||
| StarTec | ST panel AL 17, 270/45 with filling nozzle | Sealing washer A SK 125 - 5½ | 62-031-56 | 0.20 | StarTec | Is used when concrete cannot be poured from above, e.g. tunnel formwork. Connection with a manual gate valve. Operating pressure: 20 bar. |
|
||
| StarTec | AS radius panel | AS-radius panel 270/15 | 21-500-00 | 0.41 | 38.90 | StarTec | Steel construction with steel sheeting. Primed and cavity-sealed. Allows the AluStar and StarTec formwork to be used as polygonal formwork. |
|
|
| StarTec | AS radius panel | AS-radius panel 270/20 | 21-500-10 | 0.54 | 42.70 | StarTec | Steel construction with steel sheeting. Primed and cavity-sealed. Allows the AluStar and StarTec formwork to be used as polygonal formwork. |
|
|
| StarTec | AS radius panel | AS-radius panel 270/25 | 21-500-20 | 0.68 | 50.00 | StarTec | Steel construction with steel sheeting. Primed and cavity-sealed. Allows the AluStar and StarTec formwork to be used as polygonal formwork. |
|
|
| StarTec | AS radius panel | AS-radius panel 135/15 | 21-500-40 | 0.20 | 21.10 | StarTec | Steel construction with steel sheeting. Primed and cavity-sealed. Allows the AluStar and StarTec formwork to be used as polygonal formwork. |
|
|
| StarTec | AS radius panel | AS-radius panel 135/20 | 21-500-50 | 0.27 | 23.00 | StarTec | Steel construction with steel sheeting. Primed and cavity-sealed. Allows the AluStar and StarTec formwork to be used as polygonal formwork. |
|
|
| StarTec | AS radius panel | AS-radius panel 135/25 | 21-500-60 | 0.34 | 26.40 | StarTec | Steel construction with steel sheeting. Primed and cavity-sealed. Allows the AluStar and StarTec formwork to be used as polygonal formwork. |
|
|
| StarTec | AS tensioning bow | AS-tensioning bow | 21-500-95 | 5.40 | StarTec | Takes up the anchor load when forming polygonal constructions with radius panels. |
|
||
| StarTec | ST inside corner | ST-inside corner 330/25 AL | 21-251-00 | 1.65 | 87.00 | StarTec | For 90° corners. Side length 25 cm. Steel frame with tie holes and alkus facing or exchangeable steel sheet. |
|
|
| StarTec | ST inside corner | ST-inside corner 270/25 AL | 21-251-05 | 1.35 | 69.50 | StarTec | For 90° corners. Side length 25 cm. Steel frame with tie holes and alkus facing or exchangeable steel sheet. |
|
|
| StarTec | ST inside corner | ST-inside corner 135/25 AL | 21-251-35 | 0.68 | 38.00 | StarTec | For 90° corners. Side length 25 cm. Steel frame with tie holes and alkus facing or exchangeable steel sheet. |
|
|
| StarTec | ST inside corner | ST-inside corner 90/25 AL | 21-251-65 | 0.45 | 27.00 | StarTec | For 90° corners. Side length 25 cm. Steel frame with tie holes and alkus facing or exchangeable steel sheet. |
|
|
| StarTec | AS/ST outside corner | ST-outside corner 330 | 22-140-10 | 15.80 | StarTec | Aluminium. Provides together with ST panels and AS assembly locks a fast and stable outside corner assembly for 90° angles. |
|
||
| StarTec | AS/ST outside corner | AS/ST-outside corner 270 | 22-140-20 | 13.00 | StarTec | Aluminium. Provides together with ST panels and AS assembly locks a fast and stable outside corner assembly for 90° angles. |
|
||
| StarTec | AS/ST outside corner | AS/ST-outside corner 135 | 22-140-30 | 6.80 | StarTec | Aluminium. Provides together with ST panels and AS assembly locks a fast and stable outside corner assembly for 90° angles. |
|
||
| StarTec | AS/ST outside corner | AS/ST-outside corner 90 | 22-140-40 | 4.80 | StarTec | Aluminium. Provides together with ST panels and AS assembly locks a fast and stable outside corner assembly for 90° angles. |
|
||
| StarTec | Outside corner Alu(minium) | Outside corner Alu 270/5 | 22-140-25 | 0.27 | 16.10 | StarTec | Aluminium. Facing 5 cm wide on both sides, integrated chamfer strip. Provides together with ST panels and AS assembly locks a fast and tight outside corner assembly for 90° angles. |
|
|
| StarTec | Outside corner Alu(minium) | Outside corner Alu 135/5 | 22-140-35 | 0.14 | 8.40 | StarTec | Aluminium. Facing 5 cm wide on both sides, integrated chamfer strip. Provides together with ST panels and AS assembly locks a fast and tight outside corner assembly for 90° angles. |
|
|
| StarTec | Outside corner Alu(minium) | ST XT-outside corner Alu 270/10 | 22-140-50 | 0.54 | 31.05 | StarTec | Aluminium. Facing 5 cm wide on both sides, integrated chamfer strip. Provides together with ST panels and AS assembly locks a fast and tight outside corner assembly for 90° angles. |
|
|
| StarTec | AS hinged inside corner | ST-hinged inside corner 330/30 | 21-270-20 | 1.98 | 125.00 | StarTec | Steel construction with steel sheeting. Side length 30 cm. Adjustable angle 60°–180°. |
|
|
| StarTec | AS hinged inside corner | AS-hinged inside corner 270/30 | 21-270-00 | 1.62 | 73.00 | StarTec | Steel construction with steel sheeting. Side length 30 cm. Adjustable angle 60°–180°. |
|
|
| StarTec | AS hinged inside corner | AS-hinged inside corner 135/30 | 21-270-10 | 0.81 | 37.00 | StarTec | Steel construction with steel sheeting. Side length 30 cm. Adjustable angle 60°–180°. |
|
|
| StarTec | AS hinged outside corner | ST-hinged outside corner 330/7.5 | 21-280-20 | 0.49 | 62.50 | StarTec | Steel construction with steel sheeting. Side length 7.5 cm. Adjustable angle 60°–180°. |
|
|
| StarTec | AS hinged outside corner | AS-hinged outside corner 270/7.5 | 21-280-00 | 0.40 | 45.00 | StarTec | Steel construction with steel sheeting. Side length 7.5 cm. Adjustable angle 60°–180°. |
|
|
| StarTec | AS hinged outside corner | AS-hinged outside corner 135/7.5 | 21-280-10 | 0.20 | 22.00 | StarTec | Steel construction with steel sheeting. Side length 7.5 cm. Adjustable angle 60°–180°. |
|
|
| StarTec | ST stripping corner | ST stripping corner 330/25 | 21-262-05 | 1.65 | 172.00 | StarTec | Steel construction with steel sheeting. Side length 25 cm. With tie holes. When the bell-crank lever is pushed upwards with a crowbar, the corner is removed 17.5 mm away from the concrete and the formwork 35 mm away from the concrete on both sides. |
|
|
| StarTec | ST stripping corner | ST stripping corner 270/25 | 21-262-10 | 1.35 | 146.00 | StarTec | Steel construction with steel sheeting. Side length 25 cm. With tie holes. When the bell-crank lever is pushed upwards with a crowbar, the corner is removed 17.5 mm away from the concrete and the formwork 35 mm away from the concrete on both sides. |
|
|
| StarTec | ST stripping corner | ST stripping corner 135/25 | 21-262-30 | 0.68 | 82.00 | StarTec | Steel construction with steel sheeting. Side length 25 cm. With tie holes. When the bell-crank lever is pushed upwards with a crowbar, the corner is removed 17.5 mm away from the concrete and the formwork 35 mm away from the concrete on both sides. |
|
|
| StarTec | Adhesive tape, red | Adhesive tape 50 m, red | 41-912-10 | 0.83 | StarTec | Not shown. Reinforced adhesive tape, red, 50 mm wide, 50 running metres. Total thickness: 270 mµ. Natural rubber adhesive on one side. PE-coated. | |||
| StarTec | Stripping support | Stripping support | 29-306-30 | 5.00 | StarTec | The stripping support is used to easily activate the stripping corner from above. Use a power screwdriver, a ratchet wrench or a spanner to activate the stripping support. The tools must have SW 27 or 30 or 36. |
|
||
| StarTec | AS assembly lock | AS-assembly lock | 29-205-00 | 2.00 | StarTec | Galvanized. Tightly connects and aligns AluStar and StarTec panels. Clamping length 8 cm. |
|
||
| StarTec | Uni-assembly lock | Uni-assembly lock 22 | 29-400-85 | 3.60 | StarTec | Galvanized. For stepless compensation. Clamping length 22 cm or 28 cm. |
|
||
| StarTec | Uni-assembly lock | Uni-assembly lock 28 | 29-400-90 | 3.90 | StarTec | Galvanized. For stepless compensation. Clamping length 22 cm or 28 cm. |
|
||
| StarTec | RS-assembly lock | RS-assembly lock | 23-807-70 | 4.70 | StarTec | Galvanized, For stepless length compensation. Clamping length is 11.9 to 20.5 cm for stepless compensation. |
|
||
| StarTec | Combi-lock with coupling | Combi-lock with coupling | 29-804-60 | 3.70 | StarTec | Galvanized. Is used to attach the push-pull props at the panel joint of the wall formwork profile widths of 40 and 60 mm. Clamping length 8, 10 and 12 cm. |
|
||
| StarTec | Flange screw | Flange screw 18 | 29-401-10 | 1.10 | StarTec | Galvanized. DW thread Ø 15 mm. Is used to attach accessories, e.g. alignment rails, brace frames, push-pull props, etc. Length of thread 18 cm or 27 cm. |
|
||
| StarTec | Flange screw | Flange screw 28 | 29-401-12 | 1.23 | StarTec | Galvanized. DW thread Ø 15 mm. Is used to attach accessories, e.g. alignment rails, brace frames, push-pull props, etc. Length of thread 18 cm or 27 cm. |
|
||
| StarTec | ST aluminium filler | ST-aluminium filler 270/5 | 21-270-60 | 0.14 | 7.90 | StarTec | Aluminium with high-quality annealed powder coating. With tie holes. For length compensation of 5 cm, especially in corners. 2 or 3 Uni-assembly locks are required for each filler. |
|
|
| StarTec | ST aluminium filler | ST-aluminium filler 135/5 | 21-270-65 | 0.07 | 4.20 | StarTec | Aluminium with high-quality annealed powder coating. With tie holes. For length compensation of 5 cm, especially in corners. 2 or 3 Uni-assembly locks are required for each filler. |
|
|
| StarTec | ST compensation plate | ST-compensation plate 330/20 | 21-300-15 | 0.66 | 38.23 | StarTec | Steel construction with steel sheeting. Is used to compensate gaps of 8 to 20 cm and attached to the panel with 2 assembly locks. Alignment rails must be used to bridge and align the panels with the compensation plate. |
|
|
| StarTec | ST compensation plate | ST-compensation plate 270/20 | 21-300-20 | 0.54 | 30.00 | StarTec | Steel construction with steel sheeting. Is used to compensate gaps of 8 to 20 cm and attached to the panel with 2 assembly locks. Alignment rails must be used to bridge and align the panels with the compensation plate. |
|
|
| StarTec | ST compensation plate | ST-compensation plate 135/20 | 21-300-30 | 0.30 | 15.00 | StarTec | Steel construction with steel sheeting. Is used to compensate gaps of 8 to 20 cm and attached to the panel with 2 assembly locks. Alignment rails must be used to bridge and align the panels with the compensation plate. |
|
|
| StarTec | AS timber profile | AS-timber profile 270/21 | 29-200-03 | 11.00 | StarTec | Timber profile with groove. To support job-built fillers of 14 cm or more or to connect job-built formwork with 21 mm forming face; is attached to the AS/ST-panels with 2 AS-assembly locks. Delivery and weight by pairs. |
|
||
| StarTec | AS timber profile | AS-timber profile 135/21 | 29-200-05 | 5.40 | StarTec | Timber profile with groove. To support job-built fillers of 14 cm or more or to connect job-built formwork with 21 mm forming face; is attached to the AS/ST-panels with 2 AS-assembly locks. Delivery and weight by pairs. |
|
||
| StarTec | Stop end fixture 23/40 yellow | Stop end fixture 23/40 (yellow) | 29-402-85 | 3.00 | StarTec | Yellow chromated. To attach alignment rails to the panels when stop ends are formed; or it is used in connection with multi-purpose panels (EcoAs, StarTec) to form outer corners or abutments. It is suited for the frame profiles of EcoAs and AluFix (23 mm) and AluStar/StarTec (40 mm). A flange nut 100 or an articulated flange nut 15/120 are required in addition. |
|
||
| StarTec | Stop end bracket | Stop end bracket 40/60 | 29-105-50 | 15.40 | StarTec | Galvanized. Is used to form stop ends. Stop end bracket 40/60 for wall thickness up to 40 cm and profile widths of 40 and 60 mm. Stop end bracket 2.5‘ - 60/23 for wall thickness up 75 cm (2.5‘) and profile widths of 23 mm (EcoAs) and 60 mm. |
|
||
| StarTec | Stop end bracket | Stop end bracket 23/40 | 29-105-45 | 12.20 | StarTec | Galvanized. Is used to form stop ends. Stop end bracket 40/60 for wall thickness up to 40 cm and profile widths of 40 and 60 mm. Stop end bracket 2.5‘ - 60/23 for wall thickness up 75 cm (2.5‘) and profile widths of 23 mm (EcoAs) and 60 mm. |
|
||
| StarTec | Plug D20 | Plug D20 | 29-902-63 | 0.20 | StarTec | Is used to close unused tie holes (AluFix, EcoAs, AluFix, AluStar and StarTec). |
|
||
| StarTec | Plug D20 | Plug D20 without imprint | 29-902-62 | 0.20 | StarTec | Is used to close unused tie holes (AluFix, EcoAs, AluFix, AluStar and StarTec). |
|
||
| StarTec | M outside corner bracket | M-outside corner bracket, galv. | 23-137-63 | 12.00 | StarTec | Galvanized. Provides together with AS/ST panels and flange screw 18 it provides a tight outside corner assembly. Primarily used for concreting heights over 405 cm. |
|
||
| StarTec | Corner angle 40/60 | Corner angle 40/60 | 29-402-25 | 9.50 | StarTec | Galvanized. Side lengths 40 and 60 cm. For inside and outside corners. |
|
||
| StarTec | Alignment rail | AS-alignment rail 50, galv. | 29-201-73 | 5.20 | StarTec | Galvanized. Is used to brace panel joints for crane ganging, bridge problem areas, brace compensation areas and build stop ends with stop end fixtures. Is attached to the formwork with flange screws. |
|
||
| StarTec | Alignment rail | AS-alignment rail 125, galv. | 29-201-75 | 10.50 | StarTec | Galvanized. Is used to brace panel joints for crane ganging, bridge problem areas, brace compensation areas and build stop ends with stop end fixtures. Is attached to the formwork with flange screws. |
|
||
| StarTec | Alignment rail | M-alignment rail 180, galv. | 29-400-92 | 24.80 | StarTec | Galvanized. Is used to brace panel joints for crane ganging, bridge problem areas, brace compensation areas and build stop ends with stop end fixtures. Is attached to the formwork with flange screws. |
|
||
| StarTec | Alignment rail | M-alignment rail 250, galv. | 29-402-50 | 34.50 | StarTec | Galvanized. Is used to brace panel joints for crane ganging, bridge problem areas, brace compensation areas and build stop ends with stop end fixtures. Is attached to the formwork with flange screws. |
|
||
| StarTec | Alignment rail | M-alignment rail 350, reinforced | 29-402-45 | 124.00 | StarTec | Galvanized. Is used to brace panel joints for crane ganging, bridge problem areas, brace compensation areas and build stop ends with stop end fixtures. Is attached to the formwork with flange screws. |
|
||
| StarTec | Alignment rail | M-alignment rail 450 | 29-402-40 | 84.00 | StarTec | Galvanized. Is used to brace panel joints for crane ganging, bridge problem areas, brace compensation areas and build stop ends with stop end fixtures. Is attached to the formwork with flange screws. |
|
||
| StarTec | Alignment rail | M-alignment rail 450, reinforced | 29-402-38 | 159.00 | StarTec | Galvanized. Is used to brace panel joints for crane ganging, bridge problem areas, brace compensation areas and build stop ends with stop end fixtures. Is attached to the formwork with flange screws. |
|
||
| StarTec | Tie rod DW 15/90 | Tie rod DW 15/90 | 29-900-80 | 1.25 | StarTec | Uncoated, not weldable. DW thread Ø 15 mm; adm. load capacity 90 kN (DIN 18216); is used to tie panels of a double-sided formwork. |
|
||
| StarTec | Tie wrench DW15/DW20 | Tie wrench DW15/DW20 | 29-901-39 | 4.50 | StarTec | Made of steel, galvanized. Used to screw in, screw out and hold tie rods DW15 and DW20; length 400 mm. |
|
||
| StarTec | Tie rod holder | Tie rod fixture Ø35 | 29-927-05 | 1.20 | StarTec | Galvanised. To hold DW tie rods with articulated flange nut, XT tie rods or XT taper ties. Can be used with horizontal or vertical MEVA wall formwork panels. |
|
||
| StarTec | Flange nut 100 | Flange nut 100 (SW 27, forged) | 29-900-20 | 0.70 | StarTec | Forged, galvanized. DIN 18216. DW thread Ø 15 mm, plate Ø 100 mm, SW 27. Admissible load 90 kN. |
|
||
| StarTec | Articulated flange nut 15/120 | Articulated flange nut 15/120 (SW 27) | 29-900-10 | 1.81 | StarTec | Forged, galvanized. DIN 18216. DW thread Ø 15 mm, plate Ø 120 mm, max. inclination 10°, SW 27. Max. load capacity 90 kN. Reduces wear of panel coating. |
|
||
| StarTec | Spanner SW 27 | Spanner SW 27 | 29-800-10 | 1.80 | StarTec | Inset yellow chromated. Spanner width (SW) 27 mm. Is used to tighten and loosen flange nuts 100, articulated flange nuts 15/120 and flange screws. |
|
||
| StarTec | Uni-tie claw | Uni-tie claw | 29-901-41 | 1.52 | StarTec | Galvanized. Permits tieing directly above or beside the panels. Is suited for panels with profile widths of 40 and 60 mm. |
|
||
| StarTec | AS crane hook | AS-crane hook | 29-203-89 | 6.00 | StarTec | Is used to move panels. Self-locking. Load capacity: 15 kN (1.5 tons). Always 2 crane hooks required per gang. For use and safety check see the Operating Instructions. |
|
||
| StarTec | Brace frame 250 | Brace frame 250 with formwork-prop connector | 29-109-20 | 31.50 | StarTec | Galvanized. Available with formwork-prop connector. Is used to align and brace the formwork. Consists of a push-pull prop R 250 (190–320 cm), a brace SRL 120 (90–150 cm) and a double-jointed footplate.The formwork-prop connectors are attached to the formwork with flange screws 18. |
|
||
| StarTec | Formwork-prop connector | Formwork-prop connector | 29-804-85 | 1.65 | StarTec | Galvanized. Connects braces, brace frames and push-pull props (max. Ø 48 mm) to the multi-function profile with a flange screw 18. Delivery includes head bolt 16/90 and cotter pin 4. |
|
||
| StarTec | Double-jointed foot plate | Double-jointed foot plate (RS Ø to 57 mm) | 29-402-32 | 4.00 | StarTec | Galvanized. Delivery includes head bolt 16/90 and cotter pin 4. Serves as foot plate for brace frames 250 and as connector for braces and push-pull props up to Ø 57 mm. |
|
||
| StarTec | Walkway bracket | Walkway bracket 90 (yellow), galv. | 29-106-00 | 10.30 | StarTec | Galvanized, yellow, pluggable. Is used as working and safety scaffold. Is attached to the multi-function profile and secured to the multi-function profile below with a flange screw 18. The planking can be mounted to the brackets. Working width approx. 90 cm. MEVA Guard-railing post is also required. Bracket spacing depends on type of planking (DIN 4420). |
|
||
| StarTec | Side railing | Side railing 90/100, galv. | 29-108-20 | 12.30 | StarTec | Galvanized. Is plugged into the walkway bracket. |
|
||
| StarTec | Side railing | Side railing 125/100, galv. | 29-108-30 | 13.80 | StarTec | Galvanized. Is plugged into the walkway bracket. |
|
||
| StarTec | Guard-railing post | Guard-railing post 100 | 29-106-75 | 3.70 | StarTec | Galvanized. Is plugged into the walkway bracket. |
|
||
| StarTec | Guard-railing post | Guard-railing post 140 | 29-106-85 | 4.70 | StarTec | Galvanized. Is plugged into the walkway bracket. |
|
||
| StarTec | Guard-railing post 48 | Guard-railing post 48/120 (UK) | 29-106-80 | 5.50 | StarTec | Galvanized. With manifold to attach it to the walkway bracket, designed with tube Ø 48 mm to attach tube couplers. |
|
||
| StarTec | Guard-railing post 48 | Guard-railing post 48/134 | 29-920-80 | 5.45 | StarTec | Galvanized. With manifold to attach it to the walkway bracket, designed with tube Ø 48 mm to attach tube couplers. |
|
||
| StarTec | Tilting bracket 40/60 | Tilting bracket 40/60 | 29-920-82 | 4.95 | StarTec | Galvanised. Used to attach MEVA guardrailing posts to create a fall protection system. It can be set up vertically to facilitate the installation of safety meshes or railing boards or inclined by 15° to create a larger working area. Secured with a wedge to the frame profile of 40 and 60 mm. |
|
||
| StarTec | Scaffold tube | Scaffold tube 48/400 | 29-412-27 | 18.80 | StarTec | Galvanized . Is used as hand-rail / mid-rail in combination with guard-railing post 48. |
|
||
| StarTec | Scaffold tube | Scaffold tube 48/500 | 29-412-25 | 23.50 | StarTec | Galvanized . Is used as hand-rail / mid-rail in combination with guard-railing post 48. |
|
||
| StarTec | Scaffold tube | Scaffold tube 48/600 | 29-412-28 | 28.20 | StarTec | Galvanized . Is used as hand-rail / mid-rail in combination with guard-railing post 48. |
|
||
| StarTec | Swivel-joint coupler 48/48 | Swivel-joint coupler 48/48 | 29-412-52 | 1.20 | StarTec | Galvanized. Connects 2 scaffold tubes with Ø 48.3 mm at any angle required. |
|
||
| StarTec | Transport angle 12 | Transport angle 12 | 29-305-20 | 16.50 | StarTec | Is used to stack and transport 5 to 12 frame formwork panels with a construction height of 12 cm and 12 cm hole distance. Max. load capacity is 10 kN per angle. For safety reasons consider 20 kN as maximum capacity for the whole stack. We recommend using 2 foldable angles and 2 angles of the rigid type for each stack. |
|
||
| StarTec | Transport angle 12 | Transport angle 12, rigid type | 29-305-25 | 12.70 | StarTec | Is used to stack and transport 5 to 12 frame formwork panels with a construction height of 12 cm and 12 cm hole distance. Max. load capacity is 10 kN per angle. For safety reasons consider 20 kN as maximum capacity for the whole stack. We recommend using 2 foldable angles and 2 angles of the rigid type for each stack. |
|
||
| StarTec | Safety plug AS/ST stacks | Safety plug AS/ST stacks, black | 40-131-10 | 19.00 | StarTec | Secures stacked AluStar and StarTec panels. Black bolt for AluStar, grey one for StarTec 270/240. |
|
||
| StarTec | Safety plug AS/ST stacks | Safety plug ST 270/240 stacks, grey | 40-131-15 | 19.00 | StarTec | Secures stacked AluStar and StarTec panels. Black bolt for AluStar, grey one for StarTec 270/240. |
|
||
| StarTec | Crane slings 40 | Crane slings 40 | 29-401-44 | 21.00 | StarTec | Four polyester ropes, 5 m long. With 60 cm lifting chain and 4 lifting hooks. Max. load capacity 20 kN (2 tons). Are used to load and unload trucks and move panel stacks near the ground. |
|
||
| StarTec | Lifting hook 40 | Lifting hook 40 | 29-401-42 | 1.60 | StarTec | Galvanized. Allows any 4-rope crane slings available on site to be used to move the panel stacks. Always use 4 hooks at a time. Max. load capacity 10 kN (1 ton) per lifting hook. Max. weight of a panel stack 2 tons. Refer to the lifting hook Operating Instructions for application and safety test. |
|
||
| MXT | Mammut XT panels | Mammut XT panel AL | 23-001-05 | 350/250 | 8.75 | 585.00 | MXT | Galvanized and post-treated. Frame profile height 12 cm, frame profile depth 60 mm. The frames of the Mammut XT panels consist of closed, torsionally rigid steel profiles. All-around grooves guarantee a stepless, tight and perfectly aligned panel connection using M assembly locks. The permanently installed, internal and recessed XT tie holes with rotating body enable both single-sided as well as conventional, two-sided tying. All cross stiffeners are equipped with DW threaded nuts and serve as multi-function profiles, allowing easy, fast and safe attachment of accessories. The Mammut XT panels are equipped with alkus facing. |
|
| MXT | Mammut XT panels | Mammut XT panel AL | 23-001-20 | 350/125 | 4.38 | 319.50 | MXT | Galvanized and post-treated. Frame profile height 12 cm, frame profile depth 60 mm. The frames of the Mammut XT panels consist of closed, torsionally rigid steel profiles. All-around grooves guarantee a stepless, tight and perfectly aligned panel connection using M assembly locks. The permanently installed, internal and recessed XT tie holes with rotating body enable both single-sided as well as conventional, two-sided tying. All cross stiffeners are equipped with DW threaded nuts and serve as multi-function profiles, allowing easy, fast and safe attachment of accessories. The Mammut XT panels are equipped with alkus facing. |
|
| MXT | Mammut XT panels | Mammut XT panel AL | 23-001-30 | 350/100 | 3.50 | 281.00 | MXT | Galvanized and post-treated. Frame profile height 12 cm, frame profile depth 60 mm. The frames of the Mammut XT panels consist of closed, torsionally rigid steel profiles. All-around grooves guarantee a stepless, tight and perfectly aligned panel connection using M assembly locks. The permanently installed, internal and recessed XT tie holes with rotating body enable both single-sided as well as conventional, two-sided tying. All cross stiffeners are equipped with DW threaded nuts and serve as multi-function profiles, allowing easy, fast and safe attachment of accessories. The Mammut XT panels are equipped with alkus facing. |
|
| MXT | Mammut XT panels | Mammut XT panel AL | 23-001-35 | 350/ 75 | 2.63 | 188.10 | MXT | Galvanized and post-treated. Frame profile height 12 cm, frame profile depth 60 mm. The frames of the Mammut XT panels consist of closed, torsionally rigid steel profiles. All-around grooves guarantee a stepless, tight and perfectly aligned panel connection using M assembly locks. The permanently installed, internal and recessed XT tie holes with rotating body enable both single-sided as well as conventional, two-sided tying. All cross stiffeners are equipped with DW threaded nuts and serve as multi-function profiles, allowing easy, fast and safe attachment of accessories. The Mammut XT panels are equipped with alkus facing. |
|
| MXT | Mammut XT panels | Mammut XT panel AL | 23-001-50 | 350/ 50 | 1.75 | 151.00 | MXT | Galvanized and post-treated. Frame profile height 12 cm, frame profile depth 60 mm. The frames of the Mammut XT panels consist of closed, torsionally rigid steel profiles. All-around grooves guarantee a stepless, tight and perfectly aligned panel connection using M assembly locks. The permanently installed, internal and recessed XT tie holes with rotating body enable both single-sided as well as conventional, two-sided tying. All cross stiffeners are equipped with DW threaded nuts and serve as multi-function profiles, allowing easy, fast and safe attachment of accessories. The Mammut XT panels are equipped with alkus facing. |
|
| MXT | Mammut XT panels | Mammut XT panel AL | 23-001-75 | 350/ 25 | 0.88 | 105.00 | MXT | Galvanized and post-treated. Frame profile height 12 cm, frame profile depth 60 mm. The frames of the Mammut XT panels consist of closed, torsionally rigid steel profiles. All-around grooves guarantee a stepless, tight and perfectly aligned panel connection using M assembly locks. The permanently installed, internal and recessed XT tie holes with rotating body enable both single-sided as well as conventional, two-sided tying. All cross stiffeners are equipped with DW threaded nuts and serve as multi-function profiles, allowing easy, fast and safe attachment of accessories. The Mammut XT panels are equipped with alkus facing. |
|
| MXT | Mammut XT panels | Mammut XT panel AL | 23-002-05 | 300/250 | 7.50 | 497.00 | MXT | Galvanized and post-treated. Frame profile height 12 cm, frame profile depth 60 mm. The frames of the Mammut XT panels consist of closed, torsionally rigid steel profiles. All-around grooves guarantee a stepless, tight and perfectly aligned panel connection using M assembly locks. The permanently installed, internal and recessed XT tie holes with rotating body enable both single-sided as well as conventional, two-sided tying. All cross stiffeners are equipped with DW threaded nuts and serve as multi-function profiles, allowing easy, fast and safe attachment of accessories. The Mammut XT panels are equipped with alkus facing. |
|
| MXT | Mammut XT panels | Mammut XT panel AL | 23-002-20 | 300/125 | 3.75 | 271.00 | MXT | Galvanized and post-treated. Frame profile height 12 cm, frame profile depth 60 mm. The frames of the Mammut XT panels consist of closed, torsionally rigid steel profiles. All-around grooves guarantee a stepless, tight and perfectly aligned panel connection using M assembly locks. The permanently installed, internal and recessed XT tie holes with rotating body enable both single-sided as well as conventional, two-sided tying. All cross stiffeners are equipped with DW threaded nuts and serve as multi-function profiles, allowing easy, fast and safe attachment of accessories. The Mammut XT panels are equipped with alkus facing. |
|
| MXT | Mammut XT panels | Mammut XT panel AL | 23-002-30 | 300/100 | 3.00 | 239.00 | MXT | Galvanized and post-treated. Frame profile height 12 cm, frame profile depth 60 mm. The frames of the Mammut XT panels consist of closed, torsionally rigid steel profiles. All-around grooves guarantee a stepless, tight and perfectly aligned panel connection using M assembly locks. The permanently installed, internal and recessed XT tie holes with rotating body enable both single-sided as well as conventional, two-sided tying. All cross stiffeners are equipped with DW threaded nuts and serve as multi-function profiles, allowing easy, fast and safe attachment of accessories. The Mammut XT panels are equipped with alkus facing. |
|
| MXT | Mammut XT panels | Mammut XT panel AL | 23-002-35 | 300/ 75 | 2.25 | 162.00 | MXT | Galvanized and post-treated. Frame profile height 12 cm, frame profile depth 60 mm. The frames of the Mammut XT panels consist of closed, torsionally rigid steel profiles. All-around grooves guarantee a stepless, tight and perfectly aligned panel connection using M assembly locks. The permanently installed, internal and recessed XT tie holes with rotating body enable both single-sided as well as conventional, two-sided tying. All cross stiffeners are equipped with DW threaded nuts and serve as multi-function profiles, allowing easy, fast and safe attachment of accessories. The Mammut XT panels are equipped with alkus facing. |
|
| MXT | Mammut XT panels | Mammut XT panel AL | 23-002-50 | 300/ 50 | 1.50 | 131.00 | MXT | Galvanized and post-treated. Frame profile height 12 cm, frame profile depth 60 mm. The frames of the Mammut XT panels consist of closed, torsionally rigid steel profiles. All-around grooves guarantee a stepless, tight and perfectly aligned panel connection using M assembly locks. The permanently installed, internal and recessed XT tie holes with rotating body enable both single-sided as well as conventional, two-sided tying. All cross stiffeners are equipped with DW threaded nuts and serve as multi-function profiles, allowing easy, fast and safe attachment of accessories. The Mammut XT panels are equipped with alkus facing. |
|
| MXT | Mammut XT panels | Mammut XT panel AL | 23-002-75 | 300/ 25 | 0.75 | 91.30 | MXT | Galvanized and post-treated. Frame profile height 12 cm, frame profile depth 60 mm. The frames of the Mammut XT panels consist of closed, torsionally rigid steel profiles. All-around grooves guarantee a stepless, tight and perfectly aligned panel connection using M assembly locks. The permanently installed, internal and recessed XT tie holes with rotating body enable both single-sided as well as conventional, two-sided tying. All cross stiffeners are equipped with DW threaded nuts and serve as multi-function profiles, allowing easy, fast and safe attachment of accessories. The Mammut XT panels are equipped with alkus facing. |
|
| MXT | Mammut XT panels | Mammut XT panel AL | 23-003-20 | 250/125 | 3.13 | 230.00 | MXT | Galvanized and post-treated. Frame profile height 12 cm, frame profile depth 60 mm. The frames of the Mammut XT panels consist of closed, torsionally rigid steel profiles. All-around grooves guarantee a stepless, tight and perfectly aligned panel connection using M assembly locks. The permanently installed, internal and recessed XT tie holes with rotating body enable both single-sided as well as conventional, two-sided tying. All cross stiffeners are equipped with DW threaded nuts and serve as multi-function profiles, allowing easy, fast and safe attachment of accessories. The Mammut XT panels are equipped with alkus facing. |
|
| MXT | Mammut XT panels | Mammut XT panel AL | 23-003-30 | 250/100 | 2.50 | 201.50 | MXT | Galvanized and post-treated. Frame profile height 12 cm, frame profile depth 60 mm. The frames of the Mammut XT panels consist of closed, torsionally rigid steel profiles. All-around grooves guarantee a stepless, tight and perfectly aligned panel connection using M assembly locks. The permanently installed, internal and recessed XT tie holes with rotating body enable both single-sided as well as conventional, two-sided tying. All cross stiffeners are equipped with DW threaded nuts and serve as multi-function profiles, allowing easy, fast and safe attachment of accessories. The Mammut XT panels are equipped with alkus facing. |
|
| MXT | Mammut XT panels | Mammut XT panel AL | 23-003-35 | 250/ 75 | 1.88 | 135.50 | MXT | Galvanized and post-treated. Frame profile height 12 cm, frame profile depth 60 mm. The frames of the Mammut XT panels consist of closed, torsionally rigid steel profiles. All-around grooves guarantee a stepless, tight and perfectly aligned panel connection using M assembly locks. The permanently installed, internal and recessed XT tie holes with rotating body enable both single-sided as well as conventional, two-sided tying. All cross stiffeners are equipped with DW threaded nuts and serve as multi-function profiles, allowing easy, fast and safe attachment of accessories. The Mammut XT panels are equipped with alkus facing. |
|
| MXT | Mammut XT panels | Mammut XT panel AL | 23-003-50 | 250/ 50 | 1.25 | 107.40 | MXT | Galvanized and post-treated. Frame profile height 12 cm, frame profile depth 60 mm. The frames of the Mammut XT panels consist of closed, torsionally rigid steel profiles. All-around grooves guarantee a stepless, tight and perfectly aligned panel connection using M assembly locks. The permanently installed, internal and recessed XT tie holes with rotating body enable both single-sided as well as conventional, two-sided tying. All cross stiffeners are equipped with DW threaded nuts and serve as multi-function profiles, allowing easy, fast and safe attachment of accessories. The Mammut XT panels are equipped with alkus facing. |
|
| MXT | Mammut XT panels | Mammut XT panel AL | 23-003-75 | 250/ 25 | 0.63 | 74.50 | MXT | Galvanized and post-treated. Frame profile height 12 cm, frame profile depth 60 mm. The frames of the Mammut XT panels consist of closed, torsionally rigid steel profiles. All-around grooves guarantee a stepless, tight and perfectly aligned panel connection using M assembly locks. The permanently installed, internal and recessed XT tie holes with rotating body enable both single-sided as well as conventional, two-sided tying. All cross stiffeners are equipped with DW threaded nuts and serve as multi-function profiles, allowing easy, fast and safe attachment of accessories. The Mammut XT panels are equipped with alkus facing. |
|
| MXT | Mammut XT panels | Mammut XT panel AL | 23-004-20 | 125/125 | 1.56 | 119.60 | MXT | Galvanized and post-treated. Frame profile height 12 cm, frame profile depth 60 mm. The frames of the Mammut XT panels consist of closed, torsionally rigid steel profiles. All-around grooves guarantee a stepless, tight and perfectly aligned panel connection using M assembly locks. The permanently installed, internal and recessed XT tie holes with rotating body enable both single-sided as well as conventional, two-sided tying. All cross stiffeners are equipped with DW threaded nuts and serve as multi-function profiles, allowing easy, fast and safe attachment of accessories. The Mammut XT panels are equipped with alkus facing. |
|
| MXT | Mammut XT panels | Mammut XT panel AL | 23-004-30 | 125/100 | 1.25 | 103.50 | MXT | Galvanized and post-treated. Frame profile height 12 cm, frame profile depth 60 mm. The frames of the Mammut XT panels consist of closed, torsionally rigid steel profiles. All-around grooves guarantee a stepless, tight and perfectly aligned panel connection using M assembly locks. The permanently installed, internal and recessed XT tie holes with rotating body enable both single-sided as well as conventional, two-sided tying. All cross stiffeners are equipped with DW threaded nuts and serve as multi-function profiles, allowing easy, fast and safe attachment of accessories. The Mammut XT panels are equipped with alkus facing. |
|
| MXT | Mammut XT panels | Mammut XT panel AL | 23-004-35 | 125/ 75 | 0.94 | 73.50 | MXT | Galvanized and post-treated. Frame profile height 12 cm, frame profile depth 60 mm. The frames of the Mammut XT panels consist of closed, torsionally rigid steel profiles. All-around grooves guarantee a stepless, tight and perfectly aligned panel connection using M assembly locks. The permanently installed, internal and recessed XT tie holes with rotating body enable both single-sided as well as conventional, two-sided tying. All cross stiffeners are equipped with DW threaded nuts and serve as multi-function profiles, allowing easy, fast and safe attachment of accessories. The Mammut XT panels are equipped with alkus facing. |
|
| MXT | Mammut XT panels | Mammut XT panel AL | 23-004-50 | 125/ 50 | 0.63 | 58.50 | MXT | Galvanized and post-treated. Frame profile height 12 cm, frame profile depth 60 mm. The frames of the Mammut XT panels consist of closed, torsionally rigid steel profiles. All-around grooves guarantee a stepless, tight and perfectly aligned panel connection using M assembly locks. The permanently installed, internal and recessed XT tie holes with rotating body enable both single-sided as well as conventional, two-sided tying. All cross stiffeners are equipped with DW threaded nuts and serve as multi-function profiles, allowing easy, fast and safe attachment of accessories. The Mammut XT panels are equipped with alkus facing. |
|
| MXT | Mammut XT panels | Mammut XT panel AL | 23-004-75 | 125/ 25 | 0.31 | 36.80 | MXT | Galvanized and post-treated. Frame profile height 12 cm, frame profile depth 60 mm. The frames of the Mammut XT panels consist of closed, torsionally rigid steel profiles. All-around grooves guarantee a stepless, tight and perfectly aligned panel connection using M assembly locks. The permanently installed, internal and recessed XT tie holes with rotating body enable both single-sided as well as conventional, two-sided tying. All cross stiffeners are equipped with DW threaded nuts and serve as multi-function profiles, allowing easy, fast and safe attachment of accessories. The Mammut XT panels are equipped with alkus facing. |
|
| MXT | Foundation tape | Foundation tape 50 m | 29-307-50 | 20.00 | MXT | Galvanized, hole spacing 50 mm, hole Ø 16 mm, length 50 m, to be cut at hole centre, permissible tensile force 10 kN. Serves together with the appropriate tensioner as the lower anchor of horizontal panels. |
|
||
| MXT | Tensioner M for foundation tape | Tensioner M for foundation tape | 29-307-60 | 1.50 | MXT | Galvanized. Used to connect the foundation tape to the Mammut panels. Two tensioners required per anchoring position. |
|
||
| MXT | Trolley for foundation tape | Trolley for foundation tape | 29-307-55 | 21.80 | MXT | Not shown. Galvanized. Used to transport and to cut foundation tape to length. Suitable for one roll. With pneumatic tyres. | |||
| MXT | M filler | M 350-aluminium filler 350/5 | 29-300-30 | 0.18 | 10.30 | MXT | Aluminium, with cured powder coating and tie holes. For length compensation of 5 cm, particularly in corners. Two or three Uni-assembly locks are required for each filler. |
|
|
| MXT | M filler | XT aluminium filler 300/5 | 29-300-45 | 0.15 | 8.70 | MXT | Aluminium, with cured powder coating and tie holes. For length compensation of 5 cm, particularly in corners. Two or three Uni-assembly locks are required for each filler. |
|
|
| MXT | M filler | M 350-aluminium filler 250/5 | 29-300-35 | 0.13 | 7.40 | MXT | Aluminium, with cured powder coating and tie holes. For length compensation of 5 cm, particularly in corners. Two or three Uni-assembly locks are required for each filler. |
|
|
| MXT | M filler | M 350-aluminium filler 125/5 | 29-300-40 | 0.06 | 3.90 | MXT | Aluminium, with cured powder coating and tie holes. For length compensation of 5 cm, particularly in corners. Two or three Uni-assembly locks are required for each filler. |
|
|
| MXT | M Timber profile | M 350-timber profile 350/21 | 29-400-02 | 0.74 | 20.20 | MXT | Timber profile with groove. Used to support job-built length compensations of 17 cm or more or to connect job-built formwork with a 21 mm shuttering panels. Attached to Mammut XT panels with two or three assembly locks. Delivery in and weight for pairs. |
|
|
| MXT | M Timber profile | M timber profile 300/21 | 29-400-05 | 0.63 | 17.40 | MXT | Timber profile with groove. Used to support job-built length compensations of 17 cm or more or to connect job-built formwork with a 21 mm shuttering panels. Attached to Mammut XT panels with two or three assembly locks. Delivery in and weight for pairs. |
|
|
| MXT | M Timber profile | M timber profile 250/21 | 29-400-15 | 0.53 | 14.60 | MXT | Timber profile with groove. Used to support job-built length compensations of 17 cm or more or to connect job-built formwork with a 21 mm shuttering panels. Attached to Mammut XT panels with two or three assembly locks. Delivery in and weight for pairs. |
|
|
| MXT | M Timber profile | M timber profile 125/21 | 29-400-17 | 0.26 | 7.20 | MXT | Timber profile with groove. Used to support job-built length compensations of 17 cm or more or to connect job-built formwork with a 21 mm shuttering panels. Attached to Mammut XT panels with two or three assembly locks. Delivery in and weight for pairs. |
|
|
| MXT | XT compensation panel | XT compensation panel 350 | 23-153-00 | 150.20 | MXT | Galvanized. Used to create length compensations between 20 and 50 cm. With integrated plastic nailing strip to attach the facing (20 mm). Delivery in and weight for pairs. |
|
||
| MXT | XT compensation panel | XT compensation panel 300 | 23-153-05 | 130.00 | MXT | Galvanized. Used to create length compensations between 20 and 50 cm. With integrated plastic nailing strip to attach the facing (20 mm). Delivery in and weight for pairs. |
|
||
| MXT | XT compensation panel | XT compensation panel 250 | 23-153-10 | 107.60 | MXT | Galvanized. Used to create length compensations between 20 and 50 cm. With integrated plastic nailing strip to attach the facing (20 mm). Delivery in and weight for pairs. |
|
||
| MXT | XT compensation panel | XT compensation panel 125 | 23-153-15 | 55.20 | MXT | Galvanized. Used to create length compensations between 20 and 50 cm. With integrated plastic nailing strip to attach the facing (20 mm). Delivery in and weight for pairs. |
|
||
| MXT | Mammut XT inside corner 350 | Mammut XT Inside corner 350/35 | 23-152-00 | 2.45 | 149.10 | MXT | Galvanized. For 90° corners, side lengths 35 and 40 cm. Steel frame with conical anchor sleeves for tying, equipped with with struts for crane movement and alkus facing. Cross stiffeners equipped with welded-in DW-threaded nuts. |
|
|
| MXT | Mammut XT inside corner 350 | Mammut XT Inside corner 350/40 | 23-152-20 | 2.80 | 163.50 | MXT | Galvanized. For 90° corners, side lengths 35 and 40 cm. Steel frame with conical anchor sleeves for tying, equipped with with struts for crane movement and alkus facing. Cross stiffeners equipped with welded-in DW-threaded nuts. |
|
|
| MXT | Mammut XT inside corner 300 | Mammut XT Inside corner 300/35 | 23-152-05 | 2.10 | 126.50 | MXT | Galvanized. For 90° corners, side lengths 35 and 40 cm. Steel frame with conical anchor sleeves for tying, equipped with with struts for crane movement and alkus facing. Cross stiffeners equipped with welded-in DW-threaded nuts. |
|
|
| MXT | Mammut XT inside corner 300 | Mammut XT Inside corner 300/40 | 23-152-25 | 2.40 | 138.50 | MXT | Galvanized. For 90° corners, side lengths 35 and 40 cm. Steel frame with conical anchor sleeves for tying, equipped with with struts for crane movement and alkus facing. Cross stiffeners equipped with welded-in DW-threaded nuts. |
|
|
| MXT | Mammut XT inside corner 250 | Mammut XT Inside corner 250/35 | 23-152-10 | 1.75 | 108.60 | MXT | Galvanized. For 90° corners, side lengths 35 and 40 cm. Steel frame with conical anchor sleeves for tying, equipped with with struts for crane movement and alkus facing. Cross stiffeners equipped with welded-in DW-threaded nuts. |
|
|
| MXT | Mammut XT inside corner 250 | Mammut XT Inside corner 250/40 | 23-152-30 | 2.00 | 119.00 | MXT | Galvanized. For 90° corners, side lengths 35 and 40 cm. Steel frame with conical anchor sleeves for tying, equipped with with struts for crane movement and alkus facing. Cross stiffeners equipped with welded-in DW-threaded nuts. |
|
|
| MXT | Mammut XT inside corner 125 | Mammut XT Inside corner 125/35 | 23-152-15 | 0.88 | 56.30 | MXT | Galvanized. For 90° corners, side lengths 35 and 40 cm. Steel frame with conical anchor sleeves for tying, equipped with with struts for crane movement and alkus facing. Cross stiffeners equipped with welded-in DW-threaded nuts. |
|
|
| MXT | Mammut XT inside corner 125 | Mammut XT Inside corner 125/40 | 23-152-35 | 1.00 | 62.20 | MXT | Galvanized. For 90° corners, side lengths 35 and 40 cm. Steel frame with conical anchor sleeves for tying, equipped with with struts for crane movement and alkus facing. Cross stiffeners equipped with welded-in DW-threaded nuts. |
|
|
| MXT | M outside corner 350 | M 350 Outside corner 350 | 23-140-30 | 78.00 | MXT | Galvanized. For 90° corners. Side lengths 0, 10 and 15 cm. Steel frame with alkus facing. Cross stiffeners with welded-in DW-threaded nuts; corners with side lengths 10 and 15 cm equipped with with struts for crane movement. |
|
||
| MXT | M outside corner 350 | Mammut XT Outside corner 350/10 | 23-152-50 | 0.70 | 101.30 | MXT | Galvanized. For 90° corners. Side lengths 0, 10 and 15 cm. Steel frame with alkus facing. Cross stiffeners with welded-in DW-threaded nuts; corners with side lengths 10 and 15 cm equipped with with struts for crane movement. |
|
|
| MXT | M outside corner 350 | Mammut XT Outside corner 350/15 | 23-152-70 | 1.05 | 120.70 | MXT | Galvanized. For 90° corners. Side lengths 0, 10 and 15 cm. Steel frame with alkus facing. Cross stiffeners with welded-in DW-threaded nuts; corners with side lengths 10 and 15 cm equipped with with struts for crane movement. |
|
|
| MXT | M outside corner 300 | M-outside corner 300 | 23-140-00 | 66.60 | MXT | Galvanized. For 90° corners. Side lengths 0, 10 and 15 cm. Steel frame with alkus facing. Cross stiffeners with welded-in DW-threaded nuts; corners with side lengths 10 and 15 cm equipped with with struts for crane movement. |
|
||
| MXT | M outside corner 300 | Mammut XT Outside corner 300/10 | 23-152-55 | 0.60 | 86.60 | MXT | Galvanized. For 90° corners. Side lengths 0, 10 and 15 cm. Steel frame with alkus facing. Cross stiffeners with welded-in DW-threaded nuts; corners with side lengths 10 and 15 cm equipped with with struts for crane movement. |
|
|
| MXT | M outside corner 300 | Mammut XT Outside corner 300/15 | 23-152-75 | 0.90 | 103.00 | MXT | Galvanized. For 90° corners. Side lengths 0, 10 and 15 cm. Steel frame with alkus facing. Cross stiffeners with welded-in DW-threaded nuts; corners with side lengths 10 and 15 cm equipped with with struts for crane movement. |
|
|
| MXT | M outside corner 250 | M-outside corner 250 | 23-140-10 | 55.20 | MXT | Galvanized. For 90° corners. Side lengths 0, 10 and 15 cm. Steel frame with alkus facing. Cross stiffeners with welded-in DW-threaded nuts; corners with side lengths 10 and 15 cm equipped with with struts for crane movement. |
|
||
| MXT | M outside corner 250 | Mammut XT Outside corner 250/10 | 23-152-60 | 0.50 | 73.60 | MXT | Galvanized. For 90° corners. Side lengths 0, 10 and 15 cm. Steel frame with alkus facing. Cross stiffeners with welded-in DW-threaded nuts; corners with side lengths 10 and 15 cm equipped with with struts for crane movement. |
|
|
| MXT | M outside corner 250 | Mammut XT Outside corner 250/15 | 23-152-80 | 0.75 | 88.00 | MXT | Galvanized. For 90° corners. Side lengths 0, 10 and 15 cm. Steel frame with alkus facing. Cross stiffeners with welded-in DW-threaded nuts; corners with side lengths 10 and 15 cm equipped with with struts for crane movement. |
|
|
| MXT | M outside corner 125 | M-outside corner 125 | 23-140-20 | 28.50 | MXT | Galvanized. For 90° corners. Side lengths 0, 10 and 15 cm. Steel frame with alkus facing. Cross stiffeners with welded-in DW-threaded nuts; corners with side lengths 10 and 15 cm equipped with with struts for crane movement. |
|
||
| MXT | M outside corner 125 | Mammut XT Outside corner 125/10 | 23-152-65 | 0.25 | 38.20 | MXT | Galvanized. For 90° corners. Side lengths 0, 10 and 15 cm. Steel frame with alkus facing. Cross stiffeners with welded-in DW-threaded nuts; corners with side lengths 10 and 15 cm equipped with with struts for crane movement. |
|
|
| MXT | M outside corner 125 | Mammut XT Outside corner 125/15 | 23-152-85 | 0.38 | 45.50 | MXT | Galvanized. For 90° corners. Side lengths 0, 10 and 15 cm. Steel frame with alkus facing. Cross stiffeners with welded-in DW-threaded nuts; corners with side lengths 10 and 15 cm equipped with with struts for crane movement. |
|
|
| MXT | M hinged inside corner | M 350-hinged inside corner 350/40 | 23-137-30 | 2.73 | 235.00 | MXT | Steel construction with steel sheeting. Primed and cavity-sealed. Side length 40 cm. Adjustable angle 60°–180°. |
|
|
| MXT | M hinged inside corner | M-hinged inside corner 250/40 | 23-137-41 | 2.00 | 166.00 | MXT | Steel construction with steel sheeting. Primed and cavity-sealed. Side length 40 cm. Adjustable angle 60°–180°. |
|
|
| MXT | M hinged inside corner | M-hinged inside corner 125/40 | 23-137-51 | 1.00 | 85.50 | MXT | Steel construction with steel sheeting. Primed and cavity-sealed. Side length 40 cm. Adjustable angle 60°–180°. |
|
|
| MXT | M hinged outside corner | M 350-hinged outside corner 350/12.5 | 23-137-70 | 0.88 | 114.60 | MXT | Steel construction with steel sheeting. Primed and cavity-sealed. Side length 12.5 cm. Adjustable angle 60°–180°. |
|
|
| MXT | M hinged outside corner | M-hinged outside corner 250/12.5 | 23-137-81 | 0.62 | 81.60 | MXT | Steel construction with steel sheeting. Primed and cavity-sealed. Side length 12.5 cm. Adjustable angle 60°–180°. |
|
|
| MXT | M hinged outside corner | M-hinged outside corner 125/12.5 | 23-137-91 | 0.32 | 42.00 | MXT | Steel construction with steel sheeting. Primed and cavity-sealed. Side length 12.5 cm. Adjustable angle 60°–180°. |
|
|
| MXT | M 350 stripping corner | M 350 stripping corner 350/25 | 23-151-00 | 1.75 | 189.71 | MXT | Steel construction with steel sheeting. Side length 25 cm. With tie holes. When the bell-crank lever is pushed upwards with a crowbar, the corner is removed 17.5 mm away from the concrete and the formwork 35 mm away from the concrete on both sides. |
|
|
| MXT | M 350 stripping corner | M 350 stripping corner 250/25 | 23-151-20 | 1.25 | 141.06 | MXT | Steel construction with steel sheeting. Side length 25 cm. With tie holes. When the bell-crank lever is pushed upwards with a crowbar, the corner is removed 17.5 mm away from the concrete and the formwork 35 mm away from the concrete on both sides. |
|
|
| MXT | M 350 stripping corner | M 350 stripping corner 125/25 | 23-151-30 | 0.62 | 80.30 | MXT | Steel construction with steel sheeting. Side length 25 cm. With tie holes. When the bell-crank lever is pushed upwards with a crowbar, the corner is removed 17.5 mm away from the concrete and the formwork 35 mm away from the concrete on both sides. |
|
|
| MXT | Adhesive tape, red | Adhesive tape 50 m, red | 41-912-10 | 0.83 | MXT | Not shown here. Reinforced adhesive tape, red, 50 mm wide, 50 running metres. Total thickness: 270 mµ. Natural rubber adhesive on one side. PE-coated. | |||
| MXT | Stripping support | Stripping support | 29-306-30 | 5.00 | MXT | The stripping support is used to easily activate the stripping corner from above. Use a power screwdriver, a ratchet wrench or a spanner to activate the stripping support. The tools must have spanner width (SW) 27 or 30 or 36. |
|
||
| MXT | M assembly lock | M-assembly lock | 29-400-71 | 3.00 | MXT | Galvanized. Tightly connects and aligns Mammut panels. Clamping length 12 cm. |
|
||
| MXT | Uni-assembly lock | Uni-assembly lock 22 | 29-400-85 | 3.60 | MXT | Galvanized. For stepless compensation. Clamping length 22 cm or 28 cm. |
|
||
| MXT | Uni-assembly lock | Uni-assembly lock 28 | 29-400-90 | 3.90 | MXT | Galvanized. For stepless compensation. Clamping length 22 cm or 28 cm. |
|
||
| MXT | RS-assembly lock | RS-assembly lock | 23-807-70 | 4.70 | MXT | Galvanized, For stepless length compensation. Clamping length is 11.9 to 20.5 cm for stepless compensation. |
|
||
| MXT | Flange screw 18 | Flange screw 18 | 29-401-10 | 1.10 | MXT | Galvanized. Used to attach accessories such as brace frames, push-pull props, alignment rails, etc. Thread length 18 cm. |
|
||
| MXT | M-cross stiffener 44 | M-cross stiffener 44 | 29-401-02 | 6.30 | MXT | Galvanized. Short alignment rail used to brace panel joints for crane ganging and to reinforce length compensations. |
|
||
| MXT | M outside corner bracket | M-outside corner bracket, galv. | 23-137-63 | 12.00 | MXT | Galvanized. Provides together with M panels and flange screws 18 a tight outside corner assembly. Primarily used for concreting heights over 425 cm. |
|
||
| MXT | M-column bracket | M-column bracket size 1 35/34 | 29-402-13 | 7.00 | MXT | Galvanized; to build rectangular columns with M-panels or stop ends, etc. Is attached to the multi-function profile with flange screw 18. |
|
||
| MXT | Stop end bracket | Stop end bracket 40/60 | 29-105-50 | 15.40 | MXT | Galvanized. Is used to form stop ends. Stop end bracket 40/60 for wall thickness up to 40 cm and profile widths of 40 and 60 mm. Stop end bracket 2.5‘ - 60/23 for wall thickness up 75 cm (2.5‘) and profile widths of 23 mm (EcoAs) and 60 mm. |
|
||
| MXT | Stop end bracket | Stop end bracket 2.5' - 60/23 | 29-105-60 | 20.00 | MXT | Galvanized. Is used to form stop ends. Stop end bracket 40/60 for wall thickness up to 40 cm and profile widths of 40 and 60 mm. Stop end bracket 2.5‘ - 60/23 for wall thickness up 75 cm (2.5‘) and profile widths of 23 mm (EcoAs) and 60 mm. |
|
||
| MXT | M column clamp | M-Column clamp 21, galv. | 29-402-70 | 4.00 | MXT | Galvanized. Is used to attach alignment rails to panels when forming stop ends. Suited for 60 mm frame profiles of Mammut and Mammut 350 panels. A flange nut 100 or an articulated flange nut 15/120 is also required. The column clamp is attached to the multi-function profile with a flange screw 18. |
|
||
| MXT | Plug | Plug D35/38 | 29-902-71 | 0.40 | MXT | PVC. Used to seal unused Mammut XT tie holes. D35/... for XT tie hole, D27/... for frame tie hole. |
|
||
| MXT | Plug | Plug D35/38 without imprint | 29-902-72 | 0.40 | MXT | PVC. Used to seal unused Mammut XT tie holes. D35/... for XT tie hole, D27/... for frame tie hole. |
|
||
| MXT | Plug | Plug D27/30 | 29-902-61 | 0.30 | MXT | PVC. Used to seal unused Mammut XT tie holes. D35/... for XT tie hole, D27/... for frame tie hole. |
|
||
| MXT | Plug | Plug D27/30 without imprint | 29-902-67 | 0.20 | MXT | PVC. Used to seal unused Mammut XT tie holes. D35/... for XT tie hole, D27/... for frame tie hole. |
|
||
| MXT | Plug | Plug D27 without imprint, flat | 29-902-68 | 1.00 | MXT | PVC. Used to seal unused Mammut XT tie holes. D35/... for XT tie hole, D27/... for frame tie hole. |
|
||
| MXT | Plug | Plug D20 without imprint | 29-902-62 | 0.20 | MXT | PVC. Used to seal unused Mammut XT tie holes. D35/... for XT tie hole, D27/... for frame tie hole. |
|
||
| MXT | Plug | Plug D20 | 29-902-63 | 0.20 | MXT | PVC. Used to seal unused Mammut XT tie holes. D35/... for XT tie hole, D27/... for frame tie hole. |
|
||
| MXT | M alignment rail | M-alignment rail 75, galv. | 29-400-95 | 11.00 | MXT | Galvanized. Used to brace panel joints for crane ganging, to bridge problem areas, to brace compensation areas and to create stop ends with column clamps. Attached to the formwork by means of flange screws. |
|
||
| MXT | M alignment rail | M-alignment rail 180, galv. | 29-400-92 | 24.80 | MXT | Galvanized. Used to brace panel joints for crane ganging, to bridge problem areas, to brace compensation areas and to create stop ends with column clamps. Attached to the formwork by means of flange screws. |
|
||
| MXT | M alignment rail | M-alignment rail 250, galv. | 29-402-50 | 34.50 | MXT | Galvanized. Used to brace panel joints for crane ganging, to bridge problem areas, to brace compensation areas and to create stop ends with column clamps. Attached to the formwork by means of flange screws. |
|
||
| MXT | M alignment rail | M-alignment rail 350, reinforced | 29-402-45 | 124.00 | MXT | Galvanized. Used to brace panel joints for crane ganging, to bridge problem areas, to brace compensation areas and to create stop ends with column clamps. Attached to the formwork by means of flange screws. |
|
||
| MXT | M alignment rail | M-alignment rail 450 | 29-402-40 | 84.00 | MXT | Galvanized. Used to brace panel joints for crane ganging, to bridge problem areas, to brace compensation areas and to create stop ends with column clamps. Attached to the formwork by means of flange screws. |
|
||
| MXT | M alignment rail | M-alignment rail 450, reinforced | 29-402-38 | 159.00 | MXT | Galvanized. Used to brace panel joints for crane ganging, to bridge problem areas, to brace compensation areas and to create stop ends with column clamps. Attached to the formwork by means of flange screws. |
|
||
| MXT | Tie rod holder | Tie rod fixture Ø35 | 29-927-05 | 1.20 | MXT | Galvanized. Used to hold DW tie rods with articulated flange nut, XT tie rods or XT taper ties. Can be used with horizontal or vertical MEVA wall formwork panels. |
|
||
| MXT | XT tie rod DW 20 | XT tie rod DW 20/75 | 23-154-35 | 4.75 | MXT | Uncoated, with DW 20 thread. DIN 18216, not weldable. Used for single-sided and conventional tying of panels on double-sided formwork. Permissible load 160 kN. With integrated articulated flange nut. Length = 75 cm for wall thickness up to 40 cm, Length = 120 cm for wall thickness up to 85 cm. |
|
||
| MXT | XT tie rod DW 20 | XT tie rod DW 20/120 | 23-154-40 | 5.89 | MXT | Uncoated, with DW 20 thread. DIN 18216, not weldable. Used for single-sided and conventional tying of panels on double-sided formwork. Permissible load 160 kN. With integrated articulated flange nut. Length = 75 cm for wall thickness up to 40 cm, Length = 120 cm for wall thickness up to 85 cm. |
|
||
| MXT | XT taper tie 20/... | XT taper tie 20/15–25 | 23-154-10 | 5.70 | MXT | Coated, with DW 20 thread and conical, smooth middle section. Used for single-sided tying of panels on double-sided formwork. Permissible load 160 kN. With integrated XT articulated flange nut, fixation screw and adjustment rings for centimetre-precise wall thickness adjustment between 15 and 25 cm, 20 and 30 cm and 35 and 45 cm. |
|
||
| MXT | XT taper tie 20/... | XT taper tie 20/20–30 | 23-154-15 | 5.90 | MXT | Coated, with DW 20 thread and conical, smooth middle section. Used for single-sided tying of panels on double-sided formwork. Permissible load 160 kN. With integrated XT articulated flange nut, fixation screw and adjustment rings for centimetre-precise wall thickness adjustment between 15 and 25 cm, 20 and 30 cm and 35 and 45 cm. |
|
||
| MXT | XT taper tie 20/... | XT taper tie 20/35–45 | 23-154-20 | 6.40 | MXT | Coated, with DW 20 thread and conical, smooth middle section. Used for single-sided tying of panels on double-sided formwork. Permissible load 160 kN. With integrated XT articulated flange nut, fixation screw and adjustment rings for centimetre-precise wall thickness adjustment between 15 and 25 cm, 20 and 30 cm and 35 and 45 cm. |
|
||
| MXT | XT lever | XT lever | 23-154-95 | 0.30 | MXT | Galvanized. Used to rotate and adjust the XT tie hole. |
|
||
| MXT | XT sealing cone | XT sealing cone 10 | 29-902-35 | 1.00 | MXT | Plastic. Used to seal the tie holes when using the XT tie rod and the XT taper tie. |
|
||
| MXT | XT sealing cone | XT sealing cone | 29-902-34 | 1.00 | MXT | Plastic. Used to seal the tie holes when using the XT tie rod and the XT taper tie. |
|
||
| MXT | Cone for plastic tube | Cone for plastic tube D32/10 | 29-902-55 | 6.50 | MXT | Available with 10 mm covering . |
|
||
| MXT | Plastic tube D32 | Plastic tube D32/36 L 2000 mm | 29-902-28 | 10.00 | MXT | Plastic tube for use as an anchor sleeve for a tie rod DW20. |
|
||
| MXT | Plug D32 | Plug D32 | 29-902-58 | 3.00 | MXT | For closing the anchor points in the wall when using grooved Plastic tubes D32. Two plugs are required per anchor point. |
|
||
| MXT | Plastic tube D23/200 | Plastic tube D23/200 | 29-902-31 | 11.00 | MXT | Plastic tube for use as an anchor sleeve for a XT tie rod DW 20. |
|
||
| MXT | Plastic tube D23/200 | Plastic tube D23/18 | 29-902-03 | 2.00 | MXT | Plastic tube for use as an anchor sleeve for a XT tie rod DW 20. |
|
||
| MXT | Plastic tube D23/200 | Plastic tube D23/23 | 29-902-04 | 2.50 | MXT | Plastic tube for use as an anchor sleeve for a XT tie rod DW 20. |
|
||
| MXT | Plastic tube D23/200 | Plastic tube D23/28 | 29-902-05 | 3.00 | MXT | Plastic tube for use as an anchor sleeve for a XT tie rod DW 20. |
|
||
| MXT | Plastic tube D23/200 | Plastic tube D23/33 | 29-902-06 | 4.00 | MXT | Plastic tube for use as an anchor sleeve for a XT tie rod DW 20. |
|
||
| MXT | XT plug D46 | XT-Plug D46 | 29-902-76 | 5.00 | MXT | Grey plastic. Used to close the tie holes in the concrete when using XT DW tie rods with plastic tubes or when using XT taper ties. The XT plug D46 is recessed in the shadow gap. Two sealing plugs are required per anchor point. |
|
||
| MXT | XT cone DW 20 | XT-Cone DW 20 | 29-902-37 | 2.00 | MXT | PE; used on the initial formwork of Mammut XT when using the XT tie rod DW 20 in order to set the distance. Replaces XT sleeve (29-902-36). |
|
||
| MXT | Tie hole plug | Tie hole plug D27x20 | 29-902-78 | MXT | Polypropylene, for closing anchor points Ø 27 mm or 35 mm in alkus AL 20 sheets. |
|
|||
| MXT | Tie hole plug | Tie hole plug D35x20 | 29-902-79 | MXT | Polypropylene, for closing anchor points Ø 27 mm or 35 mm in alkus AL 20 sheets. |
|
|||
| MXT | XT Fibre concrete plug 47 x 8,5 | XT-Fibre concrete plug 47 x 8,5 | 29-902-82 | 6.75 | MXT | Nor shown. Made of fibre concrete, to close anchor points on the walls when using XT-seal cones 10 (29-902-35), the plugs are glued in place by concrete glue A + B (53-210-70) |
|
||
| MXT | Tie rod DW | Tie rod DW 20/120 | 29-900-97 | 3.00 | MXT | Uncoated, not weldable; DIN 18216; with DW thread; admissible load capacity 160 kN (Ø 20 mm); is used to tie panels of a double-sided formwork. |
|
||
| MXT | Tie wrench DW15/DW20 | Tie wrench DW15/DW20 | 29-901-39 | 4.50 | MXT | Made of steel, galvanized. Used to screw in, screw out and hold tie rods DW15 and DW20; length 400 mm. |
|
||
| MXT | Articulated flange nut | Articulated flange nut 20/140 | 29-900-05 | 2.40 | MXT | Forged, galvanized. DIN 18216, with DW thread Ø 20 mm, plate Ø 140 mm, max. inclination 10°, WAF 36 mm. Permissible load 160 kN. |
|
||
| MXT | Spanner | Spanner SW 27 | 29-800-10 | 1.80 | MXT | Yellow chromatised bit. WAF 27 or 36 mm. Used to tighten and loosen XT tie rod DW 20, flange nuts 100, articulated flange nuts 15/120 (or 20/140 with WAF 36) and flange screws. |
|
||
| MXT | Spanner | Spanner SW 36 | 29-800-15 | 3.30 | MXT | Yellow chromatised bit. WAF 27 or 36 mm. Used to tighten and loosen XT tie rod DW 20, flange nuts 100, articulated flange nuts 15/120 (or 20/140 with WAF 36) and flange screws. |
|
||
| MXT | Uni-tie claw | Uni-tie claw | 29-901-41 | 1.52 | MXT | Galvanized. Permits tieing directly above or beside the panels. Is suited for panels with profile widths of 40 and 60 mm. |
|
||
| MXT | M crane hook | M-crane hook | 29-401-21 | 9.60 | MXT | Used to move panels. Self-locking; load capacity 15 kN (1.5 tons). Each gang requires two crane hooks. Refer to the operating instructions for the application and safety inspection. |
|
||
| MXT | Brace frame 250 | Brace frame 250 with formwork-prop connector | 29-109-20 | 31.50 | MXT | Galvanized. Available with formwork-prop connector. Is used to align and brace the formwork. Consists of a push-pull prop R 250 (190–320 cm), a brace SRL 120 (90–150 cm) and a double-jointed footplate.The formwork-prop connectors are attached to the formwork with flange screws 18. |
|
||
| MXT | Formwork-prop connector | Formwork-prop connector | 29-804-85 | 1.65 | MXT | Galvanized. Including head bolt 16/90 and cotter pin 4. Used to connect brace frames, braces and push-pull props to the multi-function profile with flange screw 18. Maximum tube diameter of the braces and push-pull props is 48 mm. |
|
||
| MXT | Push-pull prop R | Push-pull prop R 160 | 29-109-40 | 12.60 | MXT | Galvanized. Guarantees tensile and compression strength. Aligns and supports wall and column formwork. The footplate and connectors must be ordered separately. |
|
||
| MXT | Push-pull prop R | Push-pull prop R 250 | 29-109-60 | 17.20 | MXT | Galvanized. Guarantees tensile and compression strength. Aligns and supports wall and column formwork. The footplate and connectors must be ordered separately. |
|
||
| MXT | Push-pull prop R | Push-pull prop R 460 | 29-109-80 | 34.00 | MXT | Galvanized. Guarantees tensile and compression strength. Aligns and supports wall and column formwork. The footplate and connectors must be ordered separately. |
|
||
| MXT | Push-pull prop R | Push-pull prop R 630 | 29-109-85 | 57.00 | MXT | Galvanized. Guarantees tensile and compression strength. Aligns and supports wall and column formwork. The footplate and connectors must be ordered separately. |
|
||
| MXT | Brace SRL | Brace SRL 120 | 29-108-80 | 8.79 | MXT | Galvanized. Guarantees tensile and compression strength. Consists of a right and left-hand spindle as well as a revolving central part. Aligns and supports wall and column formwork. The footplate and connectors must be ordered separately. |
|
||
| MXT | Brace SRL | Brace SRL 170 | 29-108-90 | 11.50 | MXT | Galvanized. Guarantees tensile and compression strength. Consists of a right and left-hand spindle as well as a revolving central part. Aligns and supports wall and column formwork. The footplate and connectors must be ordered separately. |
|
||
| MXT | Foot plate | Double-jointed foot plate (RS Ø to 57 mm) | 29-402-32 | 4.00 | MXT | Galvanized. With head bolt 16/90 and cotter pin 4. Serves as foot plate for brace frames 250 and as connector for braces and push-pull props up to Ø 57 mm. |
|
||
| MXT | Foot plate | Foot plate 60 (RS Ø to 57 mm) | 29-427-50 | 3.00 | MXT | Galvanized. With head bolt 16/90 and cotter pin 4. Serves as foot plate for brace frames 250 and as connector for braces and push-pull props up to Ø 57 mm. |
|
||
| MXT | Articulated foot plate | Articulated foot plate (RS Ø to 57 mm) | 29-802-48 | 2.30 | MXT | Galvanized. With head bolt 16/90 and cotter pin 4. For push-pull props and braces of up to Ø 57 mm. |
|
||
| MXT | Head bolt 16/90 | Head bolt 16/90, galv. | 42-413-50 | 0.17 | MXT | Galvanized. Is used to attach push-pull props and braces to foot plates and formwork-prop connectors. |
|
||
| MXT | Cotter pin 4 | Cotter pin D=4 | 62-010-04 | 0.50 | MXT | Galvanized. Locks the head bolt. |
|
||
| MXT | Collapsible clip | Collapsible clip 4.5 | 62-010-03 | 0.25 | MXT | Not shown. Galvanized. Locks the head bolt. | |||
| MXT | Walkway bracket | Walkway bracket 90 (yellow), galv. | 29-106-00 | 10.30 | MXT | Galvanized, yellow, pluggable. Is used as working and safety scaffold. Is attached to the multi-function profile and secured to the multi-function profile below with a flange screw 18. The planking can be mounted to the brackets. Working width approx. 90 cm. MEVA Guard-railing post is also required. Bracket spacing depends on type of planking (DIN 4420). |
|
||
| MXT | Guard-railing post | Guard-railing post 100 | 29-106-75 | 3.70 | MXT | Galvanized. Is plugged into the walkway bracket. |
|
||
| MXT | Guard-railing post | Guard-railing post 140 | 29-106-85 | 4.70 | MXT | Galvanized. Is plugged into the walkway bracket. |
|
||
| MXT | Guard-railing post 48 | Guard-railing post 48/120 (UK) | 29-106-80 | 5.50 | MXT | Galvanized. With manifold to be plugged into the walkway bracket and with 48 mm Ø tube to attach scaffold couplers. |
|
||
| MXT | Guard-railing post 48 | Guard-railing post 48/134 | 29-920-80 | 5.45 | MXT | Galvanized. With manifold to be plugged into the walkway bracket and with 48 mm Ø tube to attach scaffold couplers. |
|
||
| MXT | Tilting bracket 40/60 | Tilting bracket 40/60 | 29-920-82 | 4.95 | MXT | Galvanised. Used to attach MEVA guardrailing posts to create a fall protection system. It can be set up vertically to facilitate the installation of safety meshes or railing boards or inclined by 15° to create a larger working area. Secured with a wedge to the frame profile of 40 and 60 mm. |
|
||
| MXT | Side railing | Side railing 90/100, galv. | 29-108-20 | 12.30 | MXT | Galvanized. Is plugged into the walkway bracket. |
|
||
| MXT | Side railing | Side railing 125/100, galv. | 29-108-30 | 13.80 | MXT | Galvanized. Is plugged into the walkway bracket. |
|
||
| MXT | Scaffold tube | Scaffold tube 48/200 | 29-412-23 | 9.40 | MXT | Galvanized. Is used as hand-rail / mid-rail in combination with guard-railing post 48. |
|
||
| MXT | Scaffold tube | Scaffold tube 48/300 | 29-412-26 | 14.10 | MXT | Galvanized. Is used as hand-rail / mid-rail in combination with guard-railing post 48. |
|
||
| MXT | Scaffold tube | Scaffold tube 48/400 | 29-412-27 | 18.80 | MXT | Galvanized. Is used as hand-rail / mid-rail in combination with guard-railing post 48. |
|
||
| MXT | Swivel-joint coupler 48/48 | Swivel-joint coupler 48/48 | 29-412-52 | 1.20 | MXT | Galvanized. Connects 2 scaffold tubes with Ø 48.3 mm at any angle required. |
|
||
| MXT | Lifting hook 60 | Lifting hook 60 | 29-401-40 | 1.72 | MXT | Galvanized. Allows any 4-rope crane slings available on site to be used to move panel stacks. Always use 4 hooks at a time. Max. load capacity 10 kN (1 ton) per lifting hook. Max. weight of a panel stack 2 tons. Refer to the lifting hook Operating Instructions for application and safety test. |
|
||
| MXT | Crane slings 60 | Crane slings 60 | 29-401-45 | 22.00 | MXT | 4 polyester ropes, 5 m long. With 60 cm lifting chain and 4 lifting hooks. Max load capacity 20 kN (2 tons). Is used to load and unload trucks and to move panel stacks near the ground. |
|
||
| MXT | Ladder | Ladder 348 | 29-414-50 | 23.20 | MXT | Galvanized. Is hooked into the CF‑access platform and automatically secured. Can be extended with extension ladders. Safety cages are required for operational safety. |
|
||
| MXT | Ladder | Ladder 318 | 29-414-55 | 21.10 | MXT | Galvanized. Is hooked into the CF‑access platform and automatically secured. Can be extended with extension ladders. Safety cages are required for operational safety. |
|
||
| MXT | Ladder | Ladder 243 | 29-416-50 | 17.20 | MXT | Galvanized. Is hooked into the CF‑access platform and automatically secured. Can be extended with extension ladders. Safety cages are required for operational safety. |
|
||
| MXT | Extension ladder 210 | Extension ladder 270 | 29-416-52 | 19.20 | MXT | Galvanized. Depending on the required height, the extension ladder is either hooked into the steps of the ladder or bolted to the ladder with the ladder connector. |
|
||
| MXT | Extension ladder 210 | Extension ladder 210 | 29-414-60 | 15.90 | MXT | Galvanized. Depending on the required height, the extension ladder is either hooked into the steps of the ladder or bolted to the ladder with the ladder connector. |
|
||
| MXT | Extension ladder 210 | Extension ladder 120 | 29-416-55 | 8.50 | MXT | Galvanized. Depending on the required height, the extension ladder is either hooked into the steps of the ladder or bolted to the ladder with the ladder connector. |
|
||
| MXT | Extension ladder 210 | Extension ladder 90 | 29-416-60 | 7.40 | MXT | Galvanized. Depending on the required height, the extension ladder is either hooked into the steps of the ladder or bolted to the ladder with the ladder connector. |
|
||
| MXT | Extension ladder 210 | Extension ladder 60 | 29-416-62 | 4.40 | MXT | Galvanized. Depending on the required height, the extension ladder is either hooked into the steps of the ladder or bolted to the ladder with the ladder connector. |
|
||
| MXT | Ladder connector | Ladder connector | 29-414-70 | 1.03 | MXT | Galvanized. Connects the joint of two extension ladders without the need to hook one ladder into a step of the other. |
|
||
| MXT | Safety cage | Safety cage 210 | 29-414-85 | 27.90 | MXT | Galvanized. Internal Ø 70 cm. Protects workers when ascending and descending the ladder. The safety cages are attached to the (extension) ladders with the integrated hammerhead screws. |
|
||
| MXT | Safety cage | Safety cage 85 | 29-414-90 | 12.00 | MXT | Galvanized. Internal Ø 70 cm. Protects workers when ascending and descending the ladder. The safety cages are attached to the (extension) ladders with the integrated hammerhead screws. |
|
||
| MXT | Safety cage | Safety cage 40 | 29-416-90 | 8.20 | MXT | Galvanized. Internal Ø 70 cm. Protects workers when ascending and descending the ladder. The safety cages are attached to the (extension) ladders with the integrated hammerhead screws. |
|
||
| MXT | Ladder fixture, upper wall formwork | Ladder fixture, upper wall formwork | 29-416-82 | 7.90 | MXT | Galvanized. Attached to the multi-function profile at the top of the horizontal or vertical panel to hold the ladder or extension ladder. |
|
||
| MXT | Ladder fixture, lower wall formwork | Ladder fixture, lower wall formwork | 29-416-84 | 2.40 | MXT | Galvanized. Attached to the multi-function profile at the bottom of the horizontal or vertical panel to hold the ladder or extension ladder. |
|
||
| MXT | Folding access platform BKB 125 | Folding access platform BKB 125/235 | 29-417-10 | 185.00 | MXT | Self-locking; ready-made platform with a foldable guard-railing and an overall width of 125 cm; it is supsended onto the frame profile of the panels. The 48 mm thick planking is protected at the front ends. Stacking height 17cm; load capacity 2 kN/m². This platform is used with the formwork systems AluStar/StarTec and Mammut/Mammut 350/Mammut XT. |
|
||
| MXT | Folding access platform BKB 125 | Folding access platform BKB 125/300 | 29-417-20 | 205.00 | MXT | Self-locking; ready-made platform with a foldable guard-railing and an overall width of 125 cm; it is supsended onto the frame profile of the panels. The 48 mm thick planking is protected at the front ends. Stacking height 17cm; load capacity 2 kN/m². This platform is used with the formwork systems AluStar/StarTec and Mammut/Mammut 350/Mammut XT. |
|
||
| MXT | Folding access platform BKB 125 | Folding access platform BKB 125/140 | 29-417-00 | 120.00 | MXT | Self-locking; ready-made platform with a foldable guard-railing and an overall width of 125 cm; it is supsended onto the frame profile of the panels. The 48 mm thick planking is protected at the front ends. Stacking height 17cm; load capacity 2 kN/m². This platform is used with the formwork systems AluStar/StarTec and Mammut/Mammut 350/Mammut XT. |
|
||
| MXT | Folding access platform BKB 125 | Side railing BKB 125 | 29-417-30 | 17.00 | MXT | Self-locking; ready-made platform with a foldable guard-railing and an overall width of 125 cm; it is supsended onto the frame profile of the panels. The 48 mm thick planking is protected at the front ends. Stacking height 17cm; load capacity 2 kN/m². This platform is used with the formwork systems AluStar/StarTec and Mammut/Mammut 350/Mammut XT. |
|
||
| Mammut 350 | M 350-panel | M 350-panel AL 20 | 23-005-05 | 350/250 | 8.75 | 581.50 | Mammut 350 | Construction height 12 cm, frame profile width 60 mm. Three tie holes per panel height 350 cm and 300 cm, two tie holes per panel height 250 cm. The frames of M 350-panels are made of closed steel profiles and are torsion-proof. M 350-panels are equipped with alkus facing. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories. |
|
| Mammut 350 | M 350-panel | M 350-panel AL 20 | 23-005-20 | 350/125 | 4.38 | 260.00 | Mammut 350 | Construction height 12 cm, frame profile width 60 mm. Three tie holes per panel height 350 cm and 300 cm, two tie holes per panel height 250 cm. The frames of M 350-panels are made of closed steel profiles and are torsion-proof. M 350-panels are equipped with alkus facing. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories. |
|
| Mammut 350 | M 350-panel | M 350-panel AL 20 | 23-005-30 | 350/100 | 3.50 | 215.50 | Mammut 350 | Construction height 12 cm, frame profile width 60 mm. Three tie holes per panel height 350 cm and 300 cm, two tie holes per panel height 250 cm. The frames of M 350-panels are made of closed steel profiles and are torsion-proof. M 350-panels are equipped with alkus facing. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories. |
|
| Mammut 350 | M 350-panel | M 350-panel AL 20 | 23-005-35 | 350/ 75 | 2.63 | 174.00 | Mammut 350 | Construction height 12 cm, frame profile width 60 mm. Three tie holes per panel height 350 cm and 300 cm, two tie holes per panel height 250 cm. The frames of M 350-panels are made of closed steel profiles and are torsion-proof. M 350-panels are equipped with alkus facing. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories. |
|
| Mammut 350 | M 350-panel | M 350-panel AL 20 | 23-005-45 | 350/ 55 | 1.93 | 139.00 | Mammut 350 | Construction height 12 cm, frame profile width 60 mm. Three tie holes per panel height 350 cm and 300 cm, two tie holes per panel height 250 cm. The frames of M 350-panels are made of closed steel profiles and are torsion-proof. M 350-panels are equipped with alkus facing. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories. |
|
| Mammut 350 | M 350-panel | M 350-panel AL 20 | 23-005-50 | 350/ 50 | 1.75 | 131.00 | Mammut 350 | Construction height 12 cm, frame profile width 60 mm. Three tie holes per panel height 350 cm and 300 cm, two tie holes per panel height 250 cm. The frames of M 350-panels are made of closed steel profiles and are torsion-proof. M 350-panels are equipped with alkus facing. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories. |
|
| Mammut 350 | M 350-panel | M 350-panel AL 20 | 23-005-55 | 350/ 45 | 1.57 | 121.00 | Mammut 350 | Construction height 12 cm, frame profile width 60 mm. Three tie holes per panel height 350 cm and 300 cm, two tie holes per panel height 250 cm. The frames of M 350-panels are made of closed steel profiles and are torsion-proof. M 350-panels are equipped with alkus facing. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories. |
|
| Mammut 350 | M 350-panel | M 350-panel AL 20 | 23-005-70 | 350/ 30 | 1.05 | 93.20 | Mammut 350 | Construction height 12 cm, frame profile width 60 mm. Three tie holes per panel height 350 cm and 300 cm, two tie holes per panel height 250 cm. The frames of M 350-panels are made of closed steel profiles and are torsion-proof. M 350-panels are equipped with alkus facing. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories. |
|
| Mammut 350 | M 350-panel | M 350-panel AL 20 | 23-005-75 | 350/ 25 | 0.88 | 86.00 | Mammut 350 | Construction height 12 cm, frame profile width 60 mm. Three tie holes per panel height 350 cm and 300 cm, two tie holes per panel height 250 cm. The frames of M 350-panels are made of closed steel profiles and are torsion-proof. M 350-panels are equipped with alkus facing. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories. |
|
| Mammut 350 | M 350-panel | M 350-panel AL 20 | 23-006-05 | 300/250 | 7.50 | 464.00 | Mammut 350 | Construction height 12 cm, frame profile width 60 mm. Three tie holes per panel height 350 cm and 300 cm, two tie holes per panel height 250 cm. The frames of M 350-panels are made of closed steel profiles and are torsion-proof. M 350-panels are equipped with alkus facing. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories. |
|
| Mammut 350 | M 350-panel | M 350-panel AL 20 | 23-006-20 | 300/125 | 3.75 | 205.00 | Mammut 350 | Construction height 12 cm, frame profile width 60 mm. Three tie holes per panel height 350 cm and 300 cm, two tie holes per panel height 250 cm. The frames of M 350-panels are made of closed steel profiles and are torsion-proof. M 350-panels are equipped with alkus facing. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories. |
|
| Mammut 350 | M 350-panel | M 350-panel AL 20 | 23-006-30 | 300/100 | 3.00 | 170.50 | Mammut 350 | Construction height 12 cm, frame profile width 60 mm. Three tie holes per panel height 350 cm and 300 cm, two tie holes per panel height 250 cm. The frames of M 350-panels are made of closed steel profiles and are torsion-proof. M 350-panels are equipped with alkus facing. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories. |
|
| Mammut 350 | M 350-panel | M 350-panel AL 20 | 23-006-35 | 300/ 75 | 2.25 | 138.50 | Mammut 350 | Construction height 12 cm, frame profile width 60 mm. Three tie holes per panel height 350 cm and 300 cm, two tie holes per panel height 250 cm. The frames of M 350-panels are made of closed steel profiles and are torsion-proof. M 350-panels are equipped with alkus facing. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories. |
|
| Mammut 350 | M 350-panel | M 350-panel AL 20 | 23-006-45 | 300/ 55 | 1.65 | 113.00 | Mammut 350 | Construction height 12 cm, frame profile width 60 mm. Three tie holes per panel height 350 cm and 300 cm, two tie holes per panel height 250 cm. The frames of M 350-panels are made of closed steel profiles and are torsion-proof. M 350-panels are equipped with alkus facing. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories. |
|
| Mammut 350 | M 350-panel | M 350-panel AL 20 | 23-006-50 | 300/ 50 | 1.50 | 106.50 | Mammut 350 | Construction height 12 cm, frame profile width 60 mm. Three tie holes per panel height 350 cm and 300 cm, two tie holes per panel height 250 cm. The frames of M 350-panels are made of closed steel profiles and are torsion-proof. M 350-panels are equipped with alkus facing. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories. |
|
| Mammut 350 | M 350-panel | M 350-panel AL 20 | 23-006-55 | 300/ 45 | 1.35 | 100.50 | Mammut 350 | Construction height 12 cm, frame profile width 60 mm. Three tie holes per panel height 350 cm and 300 cm, two tie holes per panel height 250 cm. The frames of M 350-panels are made of closed steel profiles and are torsion-proof. M 350-panels are equipped with alkus facing. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories. |
|
| Mammut 350 | M 350-panel | M 350-panel AL 20 | 23-006-70 | 300/ 30 | 0.90 | 81.50 | Mammut 350 | Construction height 12 cm, frame profile width 60 mm. Three tie holes per panel height 350 cm and 300 cm, two tie holes per panel height 250 cm. The frames of M 350-panels are made of closed steel profiles and are torsion-proof. M 350-panels are equipped with alkus facing. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories. |
|
| Mammut 350 | M 350-panel | M 350-panel AL 20 | 23-006-75 | 300/ 25 | 0.75 | 75.00 | Mammut 350 | Construction height 12 cm, frame profile width 60 mm. Three tie holes per panel height 350 cm and 300 cm, two tie holes per panel height 250 cm. The frames of M 350-panels are made of closed steel profiles and are torsion-proof. M 350-panels are equipped with alkus facing. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories. |
|
| Mammut 350 | M 350-panel | M 350-panel AL 20 | 23-007-20 | 250/125 | 3.13 | 184.00 | Mammut 350 | Construction height 12 cm, frame profile width 60 mm. Three tie holes per panel height 350 cm and 300 cm, two tie holes per panel height 250 cm. The frames of M 350-panels are made of closed steel profiles and are torsion-proof. M 350-panels are equipped with alkus facing. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories. |
|
| Mammut 350 | M 350-panel | M 350-panel AL 20 | 23-007-30 | 250/100 | 2.50 | 152.00 | Mammut 350 | Construction height 12 cm, frame profile width 60 mm. Three tie holes per panel height 350 cm and 300 cm, two tie holes per panel height 250 cm. The frames of M 350-panels are made of closed steel profiles and are torsion-proof. M 350-panels are equipped with alkus facing. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories. |
|
| Mammut 350 | M 350-panel | M 350-panel AL 20 | 23-007-35 | 250/ 75 | 1.88 | 123.00 | Mammut 350 | Construction height 12 cm, frame profile width 60 mm. Three tie holes per panel height 350 cm and 300 cm, two tie holes per panel height 250 cm. The frames of M 350-panels are made of closed steel profiles and are torsion-proof. M 350-panels are equipped with alkus facing. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories. |
|
| Mammut 350 | M 350-panel | M 350-panel AL 20 | 23-007-45 | 250/ 55 | 1.38 | 99.00 | Mammut 350 | Construction height 12 cm, frame profile width 60 mm. Three tie holes per panel height 350 cm and 300 cm, two tie holes per panel height 250 cm. The frames of M 350-panels are made of closed steel profiles and are torsion-proof. M 350-panels are equipped with alkus facing. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories. |
|
| Mammut 350 | M 350-panel | M 350-panel AL 20 | 23-007-50 | 250/ 50 | 1.25 | 93.00 | Mammut 350 | Construction height 12 cm, frame profile width 60 mm. Three tie holes per panel height 350 cm and 300 cm, two tie holes per panel height 250 cm. The frames of M 350-panels are made of closed steel profiles and are torsion-proof. M 350-panels are equipped with alkus facing. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories. |
|
| Mammut 350 | M 350-panel | M 350-panel AL 20 | 23-007-55 | 250/ 45 | 1.13 | 87.50 | Mammut 350 | Construction height 12 cm, frame profile width 60 mm. Three tie holes per panel height 350 cm and 300 cm, two tie holes per panel height 250 cm. The frames of M 350-panels are made of closed steel profiles and are torsion-proof. M 350-panels are equipped with alkus facing. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories. |
|
| Mammut 350 | M 350-panel | M 350-panel AL 20 | 23-007-70 | 250/ 30 | 0.75 | 67.50 | Mammut 350 | Construction height 12 cm, frame profile width 60 mm. Three tie holes per panel height 350 cm and 300 cm, two tie holes per panel height 250 cm. The frames of M 350-panels are made of closed steel profiles and are torsion-proof. M 350-panels are equipped with alkus facing. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories. |
|
| Mammut 350 | M 350-panel | M 350-panel AL 20 | 23-007-75 | 250/ 25 | 0.63 | 63.00 | Mammut 350 | Construction height 12 cm, frame profile width 60 mm. Three tie holes per panel height 350 cm and 300 cm, two tie holes per panel height 250 cm. The frames of M 350-panels are made of closed steel profiles and are torsion-proof. M 350-panels are equipped with alkus facing. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories. |
|
| Mammut 350 | M 350-panel | M 350-panel AL 20 | 23-008-20 | 125/125 | 1.56 | 98.00 | Mammut 350 | Construction height 12 cm, frame profile width 60 mm. Three tie holes per panel height 350 cm and 300 cm, two tie holes per panel height 250 cm. The frames of M 350-panels are made of closed steel profiles and are torsion-proof. M 350-panels are equipped with alkus facing. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories. |
|
| Mammut 350 | M 350-panel | M 350-panel AL 20 | 23-008-30 | 125/100 | 1.25 | 81.00 | Mammut 350 | Construction height 12 cm, frame profile width 60 mm. Three tie holes per panel height 350 cm and 300 cm, two tie holes per panel height 250 cm. The frames of M 350-panels are made of closed steel profiles and are torsion-proof. M 350-panels are equipped with alkus facing. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories. |
|
| Mammut 350 | M 350-panel | M 350-panel AL 20 | 23-008-35 | 125/ 75 | 0.94 | 65.00 | Mammut 350 | Construction height 12 cm, frame profile width 60 mm. Three tie holes per panel height 350 cm and 300 cm, two tie holes per panel height 250 cm. The frames of M 350-panels are made of closed steel profiles and are torsion-proof. M 350-panels are equipped with alkus facing. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories. |
|
| Mammut 350 | M 350-panel | M 350-panel AL 20 | 23-008-45 | 125/ 55 | 0.69 | 52.00 | Mammut 350 | Construction height 12 cm, frame profile width 60 mm. Three tie holes per panel height 350 cm and 300 cm, two tie holes per panel height 250 cm. The frames of M 350-panels are made of closed steel profiles and are torsion-proof. M 350-panels are equipped with alkus facing. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories. |
|
| Mammut 350 | M 350-panel | M 350-panel AL 20 | 23-008-50 | 125/ 50 | 0.63 | 49.00 | Mammut 350 | Construction height 12 cm, frame profile width 60 mm. Three tie holes per panel height 350 cm and 300 cm, two tie holes per panel height 250 cm. The frames of M 350-panels are made of closed steel profiles and are torsion-proof. M 350-panels are equipped with alkus facing. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories. |
|
| Mammut 350 | M 350-panel | M 350-panel AL 20 | 23-008-55 | 125/ 45 | 0.56 | 45.50 | Mammut 350 | Construction height 12 cm, frame profile width 60 mm. Three tie holes per panel height 350 cm and 300 cm, two tie holes per panel height 250 cm. The frames of M 350-panels are made of closed steel profiles and are torsion-proof. M 350-panels are equipped with alkus facing. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories. |
|
| Mammut 350 | M 350-panel | M 350-panel AL 20 | 23-008-70 | 125/ 30 | 0.38 | 36.50 | Mammut 350 | Construction height 12 cm, frame profile width 60 mm. Three tie holes per panel height 350 cm and 300 cm, two tie holes per panel height 250 cm. The frames of M 350-panels are made of closed steel profiles and are torsion-proof. M 350-panels are equipped with alkus facing. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories. |
|
| Mammut 350 | M 350-panel | M 350-panel AL 20 | 23-008-75 | 125/ 25 | 0.31 | 33.50 | Mammut 350 | Construction height 12 cm, frame profile width 60 mm. Three tie holes per panel height 350 cm and 300 cm, two tie holes per panel height 250 cm. The frames of M 350-panels are made of closed steel profiles and are torsion-proof. M 350-panels are equipped with alkus facing. All-around grooves and M assembly locks guarantee a stepless, tight and perfectly aligned panel connection. Conical anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories. |
|
| Mammut 350 | Foundation tape | Foundation tape 50 m | 29-307-50 | 20.00 | Mammut 350 | Galvanized. Hole spacing 50 mm, hole Ø 16 mm, 50 m long. Admissible tractive force 10 kN. To be cut at hole center. Serves together with the appropriate tensioner as a bottom anchoring when panels are assembled in horizontal position. |
|
||
| Mammut 350 | Tensioner M for foundation tape | Tensioner M for foundation tape | 29-307-60 | 1.50 | Mammut 350 | Galvanized. Used to connect the foundation tape to the Mammut panels. Two tensioners required per anchoring position. |
|
||
| Mammut 350 | Trolley for foundation tape |